• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.6
• /
• pp.547-557
• /
• 2016

Due to threats caused by social disasters, operating surveillance devices are essential for social safety. CCTV, infrared cameras and other surveillance equipment are used to observe threats. This research proposes a method for searching for the optimum location of surveillance sensors. A GA (Genetic Algorithm) was used, since this algorithm is one of the most reasonable and efficient methods for solving complex non-linear problems. The sensor specifications, a DEM (Digital Elevation Model) and VITD (Vector Product Interim Terrain Data) maps were used for input data. We designed a chromosome using the sensor pixel location, and used elitism selection and uniform crossover for searching final solution. A fitness function was derived by the number of detected pixels on the borderline and the sum of the detection probability in the surveillance zone. The results of a 5-sensor and a 10-sensor were compared and analyzed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.691-702
• /
• 2019

Flood inundation map has various important roles in terms of municipal planning, timely dam operation, economic levee design, and building flood forecasting systems. Considering that the riparian areas adjacent to national rivers with high potential flood vulnerability conventionally imposed special cares to justify applications of recently available two- or three-dimensional flood inundation numerical models on top of digital elevation models of dense spatial resolution such as LiDAR irrespective of their high costs. On the contrary, local streams usually could not have benefits from recent technological advances, instead they inevitably have relied upon time-consuming manual drawings or have accepted DEMs with poor resolutions or inaccurate 1D numerical models for producing inundation maps due mainly to limited budgets and suitable techniques. In order to efficiently and cost-effectively provide a series of flood inundation maps dedicatedly for the local streams, this study proposed an OpenGIS-based flood mapping tool named Open Flood Mapper (OFM). The spatial accuracy of flood inundation map derived from the OFM was validated throughout comparison with an inundation trace map acquired after typhoon Nari in Hancheon basin located in Jeju Island. Also, a series of inundation maps from the OFM were comprehensively investigated to track the burst of flood in the extreme flood events.

• Journal of Forest and Environmental Science
• /
• v.33 no.3
• /
• pp.187-196
• /
• 2017

The use of unmanned aerial vehicles (UAV) for the estimation of tree height is gaining recognition. This study aims to assess the effectiveness of tree height estimation of Pinus densiflora Sieb. et Zucc. and Pinus koraiensis Sieb. et Zucc. using digital surface model (DSM) generated from UAV-acquired imageries. Images were taken with the $Trimble^{(R)}$ UX5 equipped with Sony ${\alpha}5100$. The generated DSM, together with the digital elevation model (DEM) generated from a digital map of the study areas, were used in the estimation of tree height. Field measurements were conducted in order to generate a regression model and carry out accuracy assessment. The obtained coefficients of determination (R2) and root mean square error (RMSE) for P. densiflora (R2=0.71; RMSE=1.00 m) and P. koraiensis (R2=0.64; RMSE=0.85 m) are comparable to the results of similar studies. The results of the paired two-tailed t-test show that the two tree height estimation methods are not significantly different (p-value=0.04 and 0.10, alpha level=0.01), which means that tree height estimation using UAV imagery could be used as an alternative to field measurement.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.5
• /
• pp.358-363
• /
• 2009

The HSPF (Hydrological Simulation Program-Fortran) model was applied to the Kyoungan stream watershed to analyze effects of watershed management plans on receiving water qualities. Utilizing BASINS 3.1 GIS program, the Kyoungan stream watershed was divided into 57 sub-basins and model input parameters were obtained, from DEM (Digital Elevation Model), land use type, stream map, and wastewater treatment facilities, etc.. The hydrologic module of the model was validated based on the measured meteorological data and stream flow data. Then the model was calibrated and verified against the field measurements of water qualities, including temperature, DO, BOD, $NO_3-N$, $NH_3-N$, Org-N, TN and TP. In most cases, there were reasonable agreements between measurements and predictions. The validated model was used to analyze the water quality improvements in the main stream of Kyoungan stream according to the watershed management plans in sub-basins, which are three different scenarios: water quality improvement in tributaries through watershed management activities, expansion and up-grade of wastewater treatment plants, and application of first and second scenarios together. It was concluded that expansion and upgrade of wastewater treatment plants would be more effective than watershed management activities. In order to improve water qualities to the satisfactory level, both watershed management and point source control must be required in the Kyoungan stream.

• Journal of Korea Water Resources Association
• /
• v.41 no.9
• /
• pp.895-905
• /
• 2008

To analyze hydrologic processes in a watershed requires both various geographical data and hydrological time series data. Recently, not only geographical data such as DEM(Digital Elevation Model) and hydrologic thematic map but also hydrological time series from numerical weather prediction and rainfall radar have been provided as grid data, and there are studies on hydrologic analysis using these grid data. In this study, GRM(Grid based Rainfall-runoff Model) which is physically-based distributed rainfall-runoff model has been developed to simulate short term rainfall-runoff process effectively using these grid data. Kinematic wave equation is used to simulate overland flow and channel flow, and Green-Ampt model is used to simulate infiltration process. Governing equation is discretized by finite volume method. TDMA(TriDiagonal Matrix Algorithm) is applied to solve systems of linear equations, and Newton-Raphson iteration method is applied to solve non-linear term. Developed model was applied to simplified hypothetical watersheds to examine model reasonability with the results from $Vflo^{TM}$. It was applied to Wicheon watershed for verification, and the applicability to real site was examined, and simulation results showed good agreement with measured hydrographs.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.3
• /
• pp.171-177
• /
• 2013

The purpose of this study is to find a scheme to scale down the KMA (Korea Meteorological Administration) digital precipitation maps to the grid cell resolution comparable to the rural landscape scale in Korea. As a result, we suggest two steps procedure called RATER (Radar Assisted Topography and Elevation Revision) based on both radar echo data and a mountain precipitation model. In this scheme, the radar reflection intensity at the constant altitude of 1.5 km is applied first to the KMA local analysis and prediction system (KLAPS) 5 km grid cell to obtain 1 km resolution. For the second step the elevation and topography effect on the basis of 270 m digital elevation model (DEM) which represented by the Parameter-elevation Regressions on Independent Slopes Model (PRISM) is applied to the 1 km resolution data to produce the 270 m precipitation map. An experimental watershed with about $50km^2$ catchment area was selected for evaluating this scheme and automated rain gauges were deployed to 13 locations with the various elevations and slope aspects. 19 cases with 1 mm or more precipitation per day were collected from January to May in 2013 and the corresponding KLAPS daily precipitation data were treated with the second step procedure. For the first step, the 24-hour integrated radar echo data were applied to the KLAPS daily precipitation to produce the 1 km resolution data across the watershed. Estimated precipitation at each 1 km grid cell was then regarded as the real world precipitation observed at the center location of the grid cell in order to derive the elevation regressions in the PRISM step. We produced the digital precipitation maps for all the 19 cases by using RATER and extracted the grid cell values corresponding to 13 points from the maps to compare with the observed data. For the cases of 10 mm or more observed precipitation, significant improvement was found in the estimated precipitation at all 13 sites with RATER, compared with the untreated KLAPS 5 km data. Especially, reduction in RMSE was 35% on 30 mm or more observed precipitation.

• Korean Journal of Remote Sensing
• /
• v.28 no.3
• /
• pp.319-327
• /
• 2012

In this paper, we introduce a newly developed photogrammetric software for automatic generation of high quality geo-products and its performance assessment carried out using various satellite images. Our newly developed software provides the latest techniques of an optimized sensor modelling, ortho-image generation and automated Digital Elevation Model (DEM) generation for diverse remote sensing images. In particular, images from dual- and multi-sensor images can be integrated for 3D mapping. This can be a novel innovation toward a wider applicability of remote sensing data, since 3D mapping has been limited within only single-sensor so far. We used Kompsat-2, Ikonos, QuickBird, Spot-5 high resolution satellite images to test an accuracy of 3D points and ortho-image generated by the software. Outputs were assessed by comparing reliable reference data. From various sensor combinations 3D mapping were implemented and their accuracy was evaluated using independent check points. Model accuracy of 1~2 pixels or better was achieved regardless of sensor combination type. The high resolution ortho-image results are consistent with the reference map on a scale of 1:5,000 after being rectified by the software and an accuracy of 1~2 pixels could be achieved through quantitative assessment. The developed software offers efficient critical geo-processing modules of various remote sensing images and it is expected that the software can be widely used to meet the demand on the high-quality geo products.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2000.06a
• /
• pp.67-76
• /
• 2000

Recently, SAR Interferometry method is actively being studied as a new technic in topographic mapping using satellite imageries. it extract height values using two SAR imageries covering same areas. Unlike when using SPOT imageries, it isn't affected by atmospheric conditions and time. But it is difficult to process radar imageries and the height accuracy is very low where relief displacements are high. In this study, we produced DEM(Digital Elevation Model) using ERS-1, ERS-2 tandem data and analysed the height accuracy over 14 ground control points. The mean error in height was 14.06m. But when using airborne SAR data, it Is expected that we can produce more accurate DEM which will be able to ue used in updating 1/10,000 or 1/25,000 map.

• Journal of Korea Water Resources Association
• /
• v.32 no.6
• /
• pp.721-730
• /
• 1999

A Grid-based daily evapotranspiration(ET) prediction model which calculates temporal and spatial ET with a complementary relationship of Morton(1983) was developed. The model was programmed by C-language and uses ASCII formatted map data of DEM(Digital Elevation Model) and land use. Daily ET within the watershed is calculated and the results of temporal variations and spatial distributions of ET are presented by using GRASS(Geographic Resources Analysis Support System). To verify the applicability of the model, it was applied to the part of Bocheong stream basin (76.5$\textrm{km}^2$) located in the upstream of Dacheong Dam watershed. The result shows that the estimated evapotranspiration in 1995 was 766.1mm and 22% increased after correction radiation for slope and area.

• Journal of Korea Water Resources Association
• /
• v.51 no.6
• /
• pp.481-490
• /
• 2018

Recently, the spatiotemporal patterns of flood disasters have become more complex and unpredictable due to climate change. Flood hazard map including information on flood risk level has been widely used as an unstructured measure against flooding damages. In order to product a high-precision flood hazard map by combination of hydrologic and hydraulic modeling, huge digital information such as topography, geology, climate, landuse and various database related to social economic are required. However, in some areas, especially in developing countries, flood hazard mapping is difficult or impossible and its accuracy is insufficient because such data is lacking or inaccessible. Therefore, this study suggests a method to delineate large scale flood-prone area based on topographic factors produced by linear binary classifier and ROC (Receiver Operation Characteristics) using globally-available geographic data such as ASTER or SRTM. We applied the proposed methodology to five different countries: North Korea Bangladesh, Indonesia, Thailand and Myanmar. The results show that model performances on flood area detection ranges from 38% (Bangladesh) to 78% (Thailand). The flood-prone area detection based on the topographical factors has a great advantage in order to easily distinguish the large-scale inundation-potent area using only digital elevation model (DEM) for ungauged watersheds.