• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.7
• /
• pp.3620-3637
• /
• 2019

Since the birth of Synthetic Aperture Radar (SAR), it has been widely used in the military field and so on. However, the existence of speckle noise makes a good deal inconvenience for the subsequent image processing. The continuous development of sparse representation (SR) opens a new field for the speckle suppressing of SAR image. Although the SR de-noising may be effective, the over-smooth phenomenon still has bad influence on the integrity of the image information. In this paper, one novel SAR image de-noising method based on residual image fusion and sparse representation is proposed. Firstly we can get the similar block groups by the non-local similar block matching method (NLS-BM). Then SR de-noising based on the adaptive K-means singular value decomposition (K-SVD) is adopted to obtain the initial de-noised image and residual image. The residual image is processed by Shearlet transform (ST), and the corresponding de-noising methods are applied on it. Finally, in ST domain the low-frequency and high-frequency components of the initial de-noised and residual image are fused respectively by relevant fusion rules. The final de-noised image can be recovered by inverse ST. Experimental results show the proposed method can not only suppress the speckle effectively, but also save more details and other useful information of the original SAR image, which could provide more authentic and credible records for the follow-up image processing.

• Journal of Electrochemical Science and Technology
• /
• v.15 no.2
• /
• pp.276-290
• /
• 2024

A study of the transition from transitory state to steady state in DSSCs based on natural dyes is presented; cochineal was used as dye and Li⁺, Na⁺, and K⁺ were the ions added to the electrolyte. The photocurrent profiles were obtained as a function of time. Several DSSCs were prepared with different cations and their role and the transitory-to-steady transition was determined. A novel hybrid charge carrier source model based on the Heaviside function H(t) and the Lambert-Beer law, was developed and applied to analysis of the transient response of the output photocurrent. Additionally, the maximum effective light absorption coefficient α and the electronic extraction rate κ for each ion were determined: ${\alpha}_{Li^+,Na^+,K^+}\,=\,(0.486,\,0.00085,\,0.1126)\,cm^{-1}$, and also the electronic extraction rate ${\kappa}^{Li^+,Na^+,K^+}_{ext.}\,=\,(1410,\,19.07,\,19.69)\,cm\,s^{-1}$. The impedance model using Fick's second law was developed for carrier recombination to characterize the photocurrent.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.2
• /
• pp.103-114
• /
• 2012

The many DE based data hiding schemes and the many data hiding schemes based on Histogram shifting are researched in spatial domain. The data hiding scheme based on Histogram shifting have an advantage of low distortion of the stego image. But the capacity is low than other schemes. On the other hands, the DE based data hiding schemes have an advantage of high capacity. But the quality of the stego image is low. In this paper, new data hiding scheme which has the similar capacity but the increased quality of the stego image is proposed. The prediction error is divided into blocks to embed the secret data in this scheme. The prediction errors in the block are scanned before the secret data is embedded. If one prediction error is low than the threshold at least, the block is changed to embed the secret data. Otherwise the secret data is not embedded. The distortion of the stego image is minimized by this method. But the block that the secret data embedded is marked in location map. So the additional information to extract the secret data and recover the cover image is needed.

• ETRI Journal
• /
• v.28 no.2
• /
• pp.257-259
• /
• 2006

In this letter, we will evaluate the performance degradation of a 40 km high-speed (40 Gb/s) optical system, induced by optical fiber variations of the chromatic dispersion induced by temperature changes. The chromatic dispersion temperature sensitivity will be estimated based on the signal quality parameters.

• Journal of IKEEE
• /
• v.21 no.1
• /
• pp.46-65
• /
• 2017

This paper proposes a fast patch-based de-blurring algorithm including kernel estimation based on the angle between the edge and the blur direction. For de-blurring, image patches from the most informative edges in the blurry image are used to estimate a kernel with low computational cost. Moreover, the kernels of each patch are estimated based on the correlation between the edge direction and the blur direction. This makes the final kernel more reliable and creates an accurate latent image from the blurry image. The combination of directionally oriented kernel estimation and patch-based de-blurring is faster and more accurate than existing state-of-the art methods. Experimental results using various test images show that the proposed method achieves its objectives: speed and accuracy.

• Earthquakes and Structures
• /
• v.21 no.5
• /
• pp.551-562
• /
• 2021

In this study, the generalized intensity measure (IM) named I_Npg is analyzed. The recently proposed proxy of the spectral shape named N_pg is the base of this intensity measure, which is similar to the traditional N_p based on the spectral shape in terms of pseudo-acceleration; however, in this case the new generalized intensity measure can be defined through other types of spectral shapes such as those obtained with velocity, displacement, input energy, inelastic parameters and so on. It is shown that this IM is able to increase the efficiency in the prediction of nonlinear behavior of structures subjected to earthquake ground motions. For this work, the efficiency of two particular cases (based on acceleration and velocity) of the generalized I_Npg to predict the peak floor acceleration demands on steel frames under 30 earthquake ground motions with respect to the traditional spectral acceleration at first mode of vibration Sa(T₁) is compared. Additionally, a 3D reinforced concrete building and an irregular steel frame is used as a basis for comparison. It is concluded that the use of velocity and acceleration spectral shape increase the efficiency to predict peak floor accelerations in comparison with the traditional and most used around the world spectral acceleration at first mode of vibration.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.11
• /
• pp.1818-1827
• /
• 2018

Objective: The objective of this work was to determine the prevalence of the pathologies that caused the condemnation of pig carcasses in an area of intensive pig farming and Mediterranean climatology and to evaluate their influence in a risk-based inspection procedure for slaughterhouses. Methods: A retrospective observational investigation was carried out from 2002 to 2016 into the pathological processes that caused the condemnation of pig carcasses in a slaughterhouse from South-eastern Spain. The seasonal effect on the causes of condemnation carcass was reported. Negative binomial model was used to evaluate the effect of season on the rate of antemortem rejections and post-mortem condemnations. Histopathological examinations were performed to confirm the diagnosis. Results: The risk of antemortem rejections (0.0564%) was significantly greater in summer (risk ratio [RR] = 1.57). Autumn was associated with higher rate (RR = 1.69) of the total postmortem condemnations (0.1046%). Significantly higher rates of pronounced anaemia (0.0111%) were observed in summer (RR = 3.20). The main causes of anaemia were observed gastroesophageal ulcers and haemorrhagic enteropathies. Significantly highest risk of erysipelas (0.0074%) were observed in autumn (RR = 5.485). About other zoonosis, only eight cases (0.0013%) of carcasses were declared unfit due to tuberculosis lesions. Porcine muscular cysticercosis was not detected. Nevertheless, nonspecific causes such as generalized infections and emaciation represented the half of the condemned carcasses (50.90%). Conclusion: The pathologies leading to the condemnation of carcasses in this study can be considered representative of the pathologies that affect the pig population from a region with a high intensive production and Mediterranean climatology because this slaughterhouse receives a lot of animals from many farms of different size in a high intensive pig production zone (Mediterranean region). Increased knowledge of environmental factors that may foment the appearance of the diseases is essential for implementing inspection programs based on risk assessment in pig's slaughterhouses.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.118-119
• /
• 2006

The development of Fe-based metal matrix composites (MMCs) with high content of hard phase has been approached by combining the use of advanced powder metallurgy techniques like high-energy milling (HEM), cold isostatic pressing (CIP) and vacuum sinterings. A 30% vol. of NbC particles was mixed with Fe powder by HEM in a planetary mill during 10h, characteristing the powder by the observation of morphology and microstructure by scanning electron microscopy (SEM). After of sintering process the variation of density, hardness,carbon content and the microstructural changes observed, permits to find the optimal conditions of processing. Afterwards, a heat treatment study was performed to study the hardenability of the composite.

• Coupled systems mechanics
• /
• v.4 no.2
• /
• pp.137-155
• /
• 2015

This paper presents a simple procedure to obtain a substitute, homogenized mechanical response of single layer graphene sheet. The procedure is based on the judicious combination of molecular mechanics simulation results and homogenization method. Moreover, a series of virtual experiments are performed on the representative graphene lattice. Following these results, the constitutive model development is based on the well-established continuum mechanics framework, that is, the non-linear membrane theory which includes the hyperelastic model in terms of principal stretches. A proof-of-concept and performance is shown on a simple model problem where the hyperelastic strain energy density function is chosen in polynomial form.

• Steel and Composite Structures
• /
• v.7 no.5
• /
• pp.405-419
• /
• 2007

This paper presents the development of some numerical models based on the results of laboratory tests performed on axially loaded RC columns strengthened with steel angles and strips. These numerical models consider the nonlinearity of the building materials and the effects of the contact interfaces between different materials. The results of the finite element models accurately describe the general behaviour of the strengthened columns. This study allows engineers to assess the relative importance of the mechanisms acting on the strengthened RC columns. Constructive recommendations are also provided in this paper.