• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.267.1-267.1
• /
• 2013

In modern science and technology, the organization of building blocks, such as spherical particles and zeolite, is important to form a nanostructure. So, it is essential to develop methods for organizing them into large scale for many precise applications. Up to now, reflux and stirring is widely used method for organization of colloidal particles. However, because this method is hard to organize building block with high coverage and uniform orientation, it is necessary to research another method. In this work, we synthesized spherical silica particles using St$\"{o}$ber method and organized them on the glass which is coated with 3-chloropropyltrimethoxysilane (CP-TMS) and polyethyleneimine (PEI) using Sonication method. Although spherical silica particles are difficult to attach on the glass due to their small attachment site, we improved this problem by coating PEI. We introduced two mode of reaction promotion, sonication (SO) and sonication with stacking between the bare glass (SS), and investigated degree of coverage (DOC) and degree of close packing (DCP).

• Polymer(Korea)
• /
• v.31 no.4
• /
• pp.283-288
• /
• 2007

Polymer blends containing poly(acrylonitrile-butadiene-styrene) (ABS) and polycarbonate(PC) (70/30, wt%) with compatibilizer were prepared using twin screw extruder. Compatibilizers were prepared by reactive extrusion with the ABS, maleic anhydride(MAH) and dicumyl peroxide(DCP) using twin screw extruder In the ABS/PC (70/30) blends, tensile strength did not change significantly, but increased from 52.25 to 55.03 MPa when the ABS-g-MAH was added in the amount of 5 phr. From the results of rheological properties, storage modulus of the ABS/PC/ABS-g-MAH blends at low frequencies showed lager value than that of the ABS/PC(70/30) blend. From the results of the morphological properties of the ABS/PC(70/30) blend, it was observed that the drop size of the PC ranged from 1.2 to $1.5\;{\mu}m$ and did not change significantly with the addition of the ABS-g-MAH($1{\sim}10\;phr$). From the results of the storage modulus, complex viscosity, and tensile strength of the ABS/PC (70/30) blends, it is found that the ABS-g-MAH is an effective compatibilizer in the ABS/PC (70/30) blends when the ABS-g-MAH is added in the amount of 5 phr.

• Polymer(Korea)
• /
• v.38 no.5
• /
• pp.566-572
• /
• 2014

Maleic anhydride (MAH) grafted polypropylenes (PP) (MAH-g-PP) were prepared by changing MAH content and styrene monomer (SM)/MAH mole ratio with different type PP, using a twin screw extruder. The types of PP were isotatic PP (iPP), block PP (bPP), and random PP (rPP) and dicumyl peroxide (DCP) was used as an initiator. The graft degree of MAH was confirmed by the existence of carbonyl group (C=O) stretching peak at $3100cm^{-1}$ of FTIR spectrum. Thermal properties of MAH-g-PP and PP/MAH-g-PP/pulp composites were investigated by DSC and TGA. There was no district change in thermal properties of PP/MAH-g-PP/pulp composites. Based on tensile properties and SEM pictures for fractured surface of PP/MAH-g-PP/pulp composites, MAH-g-rPP was the best as the compatibilizer and optimum formulation was MAH content of 1.0 wt%, SM/MAH mole ratio of 1.0, and melt index (MI) of 25 g/10 min. The rheological properties of the composites were investigated by a dynamic rheometer. The complex viscosity, shear thinning effect, and water uptake incresed with pulp content.

• Journal of the Korean Society of Industry Convergence
• /
• v.14 no.1
• /
• pp.9-14
• /
• 2011

The excess molar enthalpies $H_m^E$ at T=298.15 K and p=101.3 kPa of ternary system {1,2-dichloropropane (1,2-DCP) + 1,3-dioxolane+ 1,4-dioxane} were predicted by using the binary contribution model of $Radojkovi{\check{c}}$ with correlated sub-binary Redlich-Kister parameters. Excess partial molar enthalpies ${\bar{H}}_i^E$ were also calculated for the binary systems {1,2-dichloropropane + 1,3-dioxolane}, {1,2-dichloropropane + 1,4-dioxane} and {1,3-dioxolane + 1,4-dioxane} using adjustable parameters of Redlich-Kister equation. By extrapolation of excess partial molar enthalpies to infinite dilution, limiting excess partial molar enthalpies ${\bar{H}}_i^{E,{\infty}}$ of each component were also obtained. The ternary excess molar enthalpies excess partial molar enthalpies of these sub-binary systems have been calculated by using our previously reported results.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.10
• /
• pp.1469-1474
• /
• 2003

Twenty four weaner lambs, eight each of Marwari, Patanwadi and Merino${\times}$Patanwadi breeds (9.9 to 10.8 kg) were randomly divided into two dietary treatments on body weight basis Viz. $T_1$-conventional (Maize-38%, GN Cake-25%, Rice Polish-24%, Jaggery solution-10%, Mineral mixture-3%) and $T_2$-supplemented non conventional group (GN Cake-25%, Rice Polish-14%, Mango seed kernel-25%, Babul Pods chuni-23%, Jaggery solution-10%, Mineral mixture-3%). The Jaggery solution was prepared by mixing 6.5 kg Jaggery and 3.5 kg water. The average final body weight at the end of the experiment was recorded to be $19.33{\pm}0.76$ and $19.72{\pm}0.8kg$ in conventional and non-conventional groups, respectively. The total dry matter intake (DMI) during the entire experiment period was recorded to be $89.56{\pm}5.19$ and $95.08{\pm}1.06$ (kg/head) and $532.83{\pm}9.94$ and $566.75{\pm}10.49g/d$ in conventional and nonconventional groups, respectively. The body weight gain and body measurements did not influenced by diet. The ration effect was found to be significant when the DMI was expressed in terms of g/d. The crude protein (CP) and digestible crude protein (DCP) intake/head and per kg gain observed during experiment under conventional and non-conventional treatment group did not differ from each other. However, the total digestible nutrients (TDN) intake per kg gain was significantly (p<0.05) higher in supplemented non-conventional group. The intake values of DCP and TDN were more or less in agreement with Indian Council Agricultural Research (1985) recommendations. The estimated total feed cost (Rs./animal) for experimental lambs was $274.16{\pm}8.57$ and $242.67{\pm}5.10$ in conventional and non- group, respectively. The non-conventional group had significantly (p<0.05) lower feed cost (11.6%). The return as percent of feed cost and feed cost/kg dressed weight were $92.89{\pm}5.58$ (%) and Rs. $35.40{\pm}1.11$ and $122.61{\pm}5.06$ (%) and Rs.$30.47{\pm}1.71$ in conventional and non-conventional group (p<0.05), respectively which is the reflection of significantly lower total feed cost incurred during feeding in non-conventional group. Lambs fed non-conventional based diet had similar live weights as those fed conventional diets but costed less money to achieve those weights.

• Proceedings of the KACD Conference
• /
• 2001.11a
• /
• pp.567.1-567
• /
• 2001

A self-setting calcium phosphate cement (CPC), consisting of tetracalcium phosphate (TTCP) and dicalcium phosphate anhydrous (DCP A), reacts with water and hardens fast (30 min) to form hydroxyapatite (HA) under physiological conditions as the final product. Although this CPC is finding increasing use as a biomaterial, it is presently limited to low stress bearing applications because of its relatively low strength and highly brittle nature. Recently the mechanical properties of CPC reinforced with chopped carbon fiber have been reported.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.12
• /
• pp.1809-1813
• /
• 2003

Monomeric antioxidant 1 was prepared by the reaction of 3,5-di-tert-butyl-4-hydroxybenzyl alcohol with N-[4-(chlorocarbonyl)phenyl]maleimide in the presence of imidazole. Monomeric antioxidant 2, bearing carbamate group, was synthesized from the reaction of 3,5-di-tert-butyl-4-hydroxybenzyl alcohol and azidomaleimide. Antioxidant 3 was prepared by the reaction of N-(4-hydroxyphenyl)maleimide and 3-(3,5-ditert-butyl-4-hydroxyphenyl) propionic chloride in the presence of triethylamine. These reactive antioxidants were grafted onto polypropylene (PP) by melt-processing with free radical initiators in a mini-max moulder. From the infrared spectra of the grafted PP, it was found that the monomeric antioxidants were grafted onto PP. IR spectroscopic methods were used for the quantitative determination of the extent of grafting of monomeric antioxidant. To optimize the reaction conditions, the influences of the concentration of DCP, monomeric antioxidant, reaction time and temperature on the extent of grafting were studied.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.2
• /
• pp.302-310
• /
• 2012

Bio assay of mercury and cadmium ions were searched using voltammetric analysis using DNA doped carbon nanotube paste electrodes (DCP). The square-wave stripping voltammetryic optimized results indicated working ranges of 1-10.0 $ngL^{-1}$ and 20-100 $ugL^{-1}$, Hg(II) Cd(II) within an accumulation time of 120 seconds, in 0.1-M phosphate buffer solutions of pH 6.3. The relative standard deviations of 5 $ngL^{-1}$ Hg(II) and Cd(II) that observed were 0.14 and 0.22% (n=12), respectively, using optimum conditions. The low detection limit (S/N) was pegged at 0.1 $ngL^{-1}$ ($4.9{\times}10^{-11}M$) Hg(II) and 0.2 $ngL^{-1}$ ($1.77{\times}10^{-10}M$) Cd(II). The developed methods can be applied to assays in biological fish kidneys and water samples.

• Applied Chemistry for Engineering
• /
• v.26 no.2
• /
• pp.173-177
• /
• 2015

In this study, effects of both the grafted ABS-g-MAH and the added graphene oxide (GO) on the impact strength of polycarbonate (PC)/poly(acrylonitrile-butadiene-styrene) (ABS) blends were discussed. The PC/ABS blends and PC/ABS/GO composites were fabricated by using twin screw extruder with ABS-g-MAH as a compatibilizer. The ABS-g-MAH was prepared by melting extrusion of ABS and maleic anhydride (MAH) with DCP (dicumyl peroxide) as an initiator using twin screw extruder and the synthesis of ABS-g-MAH was confirmed by the presence of carbonyl group (C=O) peak at $1780cm^{-1}$ of FT-IR spectrum. According to the thermal, rheological, and impact properties of PC/ABS blends, 5 phr (parts per hundred resin) of compatibilizer was chosen as an optimum content for the PC/ABS/GO composites. It was observed that the thermal decomposition of ABS/PC/GO composites increased with GO contents, but there was no significant changes or a decrease in the impact strength. Also the composite fabricated by ABS/GO showed small increase in the impact strength. From the result of the dynamic rheometer to observe the processing properties, the complex viscosities of PC/ABS blend including the compatibilizer increased, but the complex viscosities of composites added GO were not changed.

• Journal of Pharmaceutical Investigation
• /
• v.25 no.3
• /
• pp.249-264
• /
• 1995

Although liposome has many advantages as a pharmaceutical dosage form, its application in the industrial field has been limited because of some problems such as preparation method, reproducibility, scale-up, stability and sterilization etc. Liposomes prepared by microemulsification method had defined size, narrow size distribution, reproducibility and high entrapment efficiency. For enhancing the stability, the dry form of liposome was recommended. These types of liposome are proliposome and freeze-dried liposome. The liposome must have some properties for preparing of freeze-dried liposome; small size $(50{\sim}200\;nm)$, narrow size distribution and cryoprotectant. In this experiment, the liposomes containing 5-Fluorouracil(5-FU) and its prodrug(pentyl-5-FU-1-acetate; PFA, hexyl-5-FU-1-acetate; HFA) were made with soybean phosphatidylcholine, cholesterol, stearylamine(SA) and dicetyl phosphate(DCP) employing hydration method or microemulsification method using $Microfluidizer^{TM}$. Both or liposome types were MLV and MEL. After preparation, freeze drying and rehydration were performed. In the process of freezing, trehalose(Tr) was added as a cryoprotectant. Their evaluation methods were as follows; entrapment efficiency, mean particle size and size distribution, dissolution test, retain of entrapment efficiency and turbidity after freeze-drying. The results are summarized as belows. The entrapment efficiency of 5-FU was dependent on total lipid concentration and cholesterol content but that of PFA and HFA was decreased when cholesterol was added. When DCP and SA were added, entrapment efficiency was decreased. As the partition coefficient of drug was increased, entrapment efficiency was increased. Under the same condition, entrapment efficiency of MEL is similar to that of MLV. The mean particle size and size distribution of MEL were smaller than those of MLV. Dissolution rates of drug from both liposome types were comparatively similar. Dissolution rates of drugs with serum and liver homogenate were faster than without these material. After preparation of liposome, free drug was removed efficiency by Dowex 50W-X4. When liposome was freeze-dried and then rehydrated in the presence of Tr, characteristics of liposome were maintained well in MEL than MLV. Tr Was used successfully as a cryoprotectant in the process of freeze drying and the optimal ratio of Tr:Lipid was 4:1(g/g).