• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.201-204
• /
• 2003

Solubilization isotherms of 1-chlorobenzene (MCB) and 1, 2-dichlorobenzene (DCB) were investigated in ionic surfactant solutions such as sodium dodecyl sulfate (SDS), cetylpyridinium chloride (CPC), and dedecyltrimethylammonium chloride (DMAC). The solubilization extent of DCB was much higher than that of MCB because of the main driving force of solubilization Is hydrophobic interactions between chlorobenzenes and hydrophobic interior of ionic micelles and DCB is more hydrophobic than MCB. CPC showed highest solubilization capacity because of longest hydrophobic tails. Simultaneous solubilization of MCB and DCB decreased slightly the extent solubilization of both MCB and DCB because the solubilization locus in the micelles is same.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.1
• /
• pp.35-41
• /
• 2008

The purpose of this study was to investigate the effects of Chungkookjang viscous biopolymer supplementation on blood glucose and serum lipid-lowering in Streptozotocin (STZ)-induced diabetic rats. The rats were divided into three experimental groups; a normal group (N), diabetic control group (D), and a diabetic group with the supplementation of Chungkookjang viscous biopolymer (DCB). The groups were given experimental diets for four weeks. The normal group (C) was fed a casein-based diet, and the Chungkookjang viscous biopolymer group (DCB) received 3% biopolymer added to the casein-based diet. In the diabetic group (D), food intake increased significantly, but weight gain decreased significantly. The food efficiency ratio was significantly lower in the diabetic group. Liver weight increased significantly in the D group as compared to the N group. However, the DCB group showed a significant decrease in liver weight when compared to the D group. Blood glucose decreased significantly in the DCB group after receiving the experimental diet for four weeks, as compared to the diabetic control (p<0.05). Serum triglyceride levels were significantly lower in the DCB group than in the D group, whereas HDL-cholesterol levels were significantly higher (p<0.05). Total cholesterol was decreased in DCB group, but there were no significant differences. Also, LDL-cholesterol level was not significantly different among the experimental groups. Hepatic triglyceride and cholesterol were lower in the DCB group with no significant differences among groups. These results indicate that dietary supplementation of Chungkookjang viscous biopolymer improved glucose lowering and lipid metabolism in diabetic rats.

• Composites Research
• /
• v.32 no.1
• /
• pp.6-12
• /
• 2019

This paper describes the characteristics for mode I interlaminar and intralaminar fractures of cross-ply carbon/epoxy composite laminates. We obtained mode I interlaminar fracture toughness and mode I intralaminar fracture toughness based on energy release rate and Finite Element Analysis (FEA). For this purpose, the Double-Cantilever Beam (DCB) test and FEA were performed for cross-ply DCB specimens. Also, the behavior of load-displacement curve at the interlaminar and intralaminar crack was analyzed. The results show that mode I intralaminar fracture toughness was lower than mode I interlaminar fracture toughness in the cross-ply DCB specimen.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.6 s.177
• /
• pp.1547-1556
• /
• 2000

In this paper, an evaluation method of fracture toughness to apply interfacial fracture mechanics was investigated in adhesively bonded double-cantilever beam (DCB) joints. Four types of adhesively bonded DCB joints with an interface crack were prepared for analyses of the stress intensity factors using boundary element method(BEM) and the fracture toughness test. From the results of BEM analysis and fracture toughness experiments, it is found that the stress intensity factor, K1 is a parameter driving the fracture of adhesively bonded joints. Also, the evaluation method of fracture toughness by separated stress intensity factors of mixed mode cracks was proposed and the influences of mode components for its fracture toughness are investigated in adhesively bonded DCB joints.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1488-1495
• /
• 2012

In this study, the fracture behaviour of DCB(double cantilever beam) specimen with aluminum foam composite materials is analyzed by simulation. The used model is 3D configuration on the basis of British industrial standard and ISO international standard. As the thickness of model is increased, the length of propagated crack is increased and the load becomes higher. The analysis result obtained by this study can be applied at the practical composite structure bonded with aluminum foam materials. The fracture behaviour is analyzed and the mechanical property can be understood.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.3
• /
• pp.185-189
• /
• 1987

Reactions of $Ir(ClO)_4(CO)(PPh_3)_2$ with dicyano olefins, cis-NCCH = CH$CH_2$$CH_2$CN (cDC1B), trans-NCCH = CH$CH_2$$CH_2$CN (tDC1B), trans-NC$CH_2$CH = CH$CH_2$CN (tDC2B), and NC$CH_2$$CH_2$$CH_2$$CH_2$CN (DCB) produce binuclear dicationic iridium (I) complexes, $[(CO)(PPh_3)_2Ir-NC-A-CN-Ir(PPh_3)_2(CO)](ClO_4)_2$ (NC-A-CN = cDC1B (1a), tDC1B (1b), tDC2B (1c), DCB (1d)). Complexes 1a-1d react with hydrogen to give binuclear dicationic tetrahydrido iridium (Ⅲ ) complexes, $[(CO)(PPh_3)_2(H)_2Ir-NC-A-CN-Ir(H)_2(PPh_3)_2(CO)](ClO_4)_2$ (NC-A-CN = cDC1B (2a), tDC1B (2b), tDC2B (2c), DCB (2d)). Complexes 2a and 2b catalyze the hydrogenation of cDC1B and tDC1B, respectively to give DCB, while the complex 2c is catalytically active for the isomerization of tDC2B to give cDC1B and tDC1B and the hydrogenation of tDC2B to give DCB at $100^{\circ}C$.

• Bulletin of the Korean Space Science Society
• /
• 2011.04a
• /
• pp.22.2-22.2
• /
• 2011

이 연구에서는 한반도 상공의 전리층 총전자수를 격자 형태로 나타냈다. 이를 위해 국토해양부 GPS 상시관측소에서 제공 중인 코드와 위상 측정값을 선형조합하였으며 그 결과물을 이용하여 시선방향 총전자수를 산출하였다. 이때 전리층 총전자수 산출결과의 정확도를 향상시키기 위해 가중최소자승법을 이용하여 위성과 수신기의 하드웨어 오차인 DCB(Differencial Code Bias)를 추정하였으며 추정된 DCB값은 IGS에서 제공 중인 DCB값과 비교하여 정확도를 확인하였다. 산출된 시선방향 총전자수를 연직방향 총전자수로 변환하기 위해 사상함수를 적용하였으며, 이를 다시 각 격자점에서의 연직방향 총전자수로 변환하기 위해 기존 연직방향 총전자수에 역거리 가중 보간법을 적용하였다. 각 격자점에서의 총전자수는 IGS(International GNSS Service)에서 제공 중인 GIM(Global Ionosphere Map) 모델의 총전자수와 비교하여 정확도를 확인하였다. 산출된 총전자수는 2시간 간격으로 나타내어 한반도 상공 전리층 총전자수의 변화 경향을 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.11
• /
• pp.3491-3497
• /
• 1996

The work factor approach was applied to determine $G_ {IC}$ of fiber reinforced composites (AS4/3501) from a single unidirectional (0-deg) DCB specimen. Elastic work factors of DCB specimen for three different symmetrical staking sequences were derived from a simple bending theory and a finite element method. The results showed that elastic work factors calculated from both methods were comparable each other. In particular, the elastic work factor of DCB specimen with symmetrical stacking sequence is independent of stacking sequence. The $G_ {IC}$ determined from the work factor approach was compared with that determined by the compliance method. The results showed that the work factor approach and the compliance method produce comparable results of $G_ {IC}$. Thus, $G_ {IC}$ can be determined from a single DCB specimen using the work factor approach.

• Advanced Composite Materials
• /
• v.17 no.3
• /
• pp.301-317
• /
• 2008

The energy release rate associated with crack growth in adhesive double cantilever beam (DCB) specimens, including the effect of residual stresses, was formulated using beam theory. Because of the rotation of the asymmetric arms in the adhesive DCB specimens due to temperature change, it is necessary to correct the evaluated fracture toughness of the DCB specimens, specifically in the case of a large temperature change. This study shows that the difference between the true toughness and an apparent toughness due to the consequence of ignoring residual stresses can be calculated for a given specimen geometry and thermo-mechanical properties (e.g. coefficient of thermal expansion). The calculated difference in the energy release rates based on the present correction method is compared with that from FEM in order to verify the present correction method. The residual stress effects on the evaluation of the adhesive fracture toughness are discussed.

• Journal of Environmental Health Sciences
• /
• v.23 no.4
• /
• pp.33-38
• /
• 1997

Four bacterial strains able to degrade dichlorobenzene as the sole source of carbon and energy were isolated from soil by selective enrichment culture, and among them, one isolation was the best in the cell growth and identified as Pseudomonas sp. DCB3 by its morphology and physiological properties. Cell growth dramatically increased in a minimal medium containing 500ppm of dichlorobenzene was not detected any more at 72 hours after cultivation. The optimal temperature and initial pH for the growth of the isolated strain were 30$\circ$C and 7.0, respectively. Cell growth was increased by supplementing $(NH_2)_2CO$ and 50 ppm yeast extract as additional nutrients. Therefore, it was suggested that Pseudomonas sp. DCB3 could be effectively used for the biological treatment of wastewater containing dichlorobenzene.