• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.714-716
• /
• 2003

This paper deals with the characteristic analysis of a brushless DC motor (BLDC) and taking into consideration the freewheeling diodes and DC link voltage ripple using a time-stepped voltage source finite element method. By comparing with the experimental results, we show that the proposed computational method is useful for the analysis and design of a BLDC motor. We also examine the influence of freewheeling diodes and DC link voltage ripples on the performance of a BLDC motor such as torque ripples and radial force on the surface of the teeth.

• 전기학회논문지P
• /
• 제65권2호
• /
• pp.114-121
• /
• 2016

This paper is Instant space vector PWM(Pulse Width Modulation)power conversion devices in switching power semiconductors from my generation to losses and switching when the voltage surge and current surge of electronic noise(EMI: Electro Magnetic Interference / RFI: Radio Frequency Interference)to effectively minimize the power soft-switching power conversion circuit topologies of auxiliary resonant DC tank for the purpose of high performance realization of the electric power conversion system by the high-speed switching of a semiconductor device(AQRDCT simultaneously : an active auxiliary resonance using auxiliary Quasi-resonant DC tank)DC link snubber switch has adopted a three-phase voltage inverter. AQRDCL proposed in this paper can reduce the effective and current peak stress of the power semiconductors of the auxiliary resonant snubber circuit compared to the conventional active-resonant DC link snubber, it is not necessary to install the clamp switch of the auxiliary resonant DC link, DC the peak current and power loss of the bus line can be reduced.

• 전기전자학회논문지
• /
• 제23권1호
• /
• pp.99-106
• /
• 2019

본 논문에서는 UPQC 시스템과 SVC를 결합한 새로운 형태의 보상장치를 제안하고자 한다. 기존의 UPQC는 직렬형 인버터, 병렬형 인버터, DC 링크로 구성되어 있어있으며 우수한 전력품질 보상 성능을 보이지만 높은 인버터 정격을 요구한다. 제안된 방식은 직렬형 인버터, 병렬형 인버터와 DC 링크 그리고 병렬형 인버터의 출력단에 결합된 SVC로 구성되어 있으며, 기존 UPQC에 비해 넓은 무효전력 보상 범위와 낮은 DC 링크 전압의 장점을 가지고 있다. 또한, SVC가 결합된 새로운 UPQC의 구성은 Matlab 시뮬레이션을 통해 성능을 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.381-383
• /
• 2006

A novel online capacitance estimation method for a DC-link capacitor in a three-phase AC/DC/AC PWM converter is proposed. A controlled AC voltage with a lower frequency than the line frequency is Injected into the DC-link voltage, which then causes AC power ripples at the DC output side. By extracting the AC voltage and power components on the DC output side using digital filters, the capacitance can then be calculated using the recursive least squares method. The proposed method can be simply implemented with only software and no additional hardware. Experimental results confirm that the estimation error is less than 0.2%.

• 전기학회논문지P
• /
• 제61권4호
• /
• pp.192-198
• /
• 2012

Switch losses directly affect the efficiency of power conversion systems and those have big differences according to the power consumed by load systems and the structures of power conversion circuits. In this paper, analyses for switch losses in DC link converter are performed based on the circuit structures of the DC/DC converter in photovoltaic generation system whose output power is varied according to the amount of solar radiation, temperature and partial shade on the solar modules. Boost converter is adopted as a DC link converter topology of the photovoltaic generation system and the loss analyses for the switches used in the boost converters are performed according to the circuit structures. Analyses like the things performed in this paper will be a prerequisite to designing the photovoltaic generation system whose output power is changed according to the environmental variations.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 전력전자학술대회 논문집
• /
• pp.102-103
• /
• 2013

화석 연료의 고갈과 유가 급등으로 인해 자동차 업체에서는 친환경 차량 개발에 힘쓰고 있다. FCEV는 차량 구동용 전동기에 필요한 에너지를 연료전지를 통해 공급받게 된다. 하지만 연료전지의 특성상 연료전지와 배터리를 같이 사용하게 된다. 본 논문에서는 일반적인 Half-bridge 타입의 양방향 컨버터에 스위치를 추가하여 양방향 buck, boost가 가능한 컨버터를 설계하였다. 전동기 구동용 인버터는 전압형 인버터가 사용되는데 전압형 인버터에서 발생하는 출력은 데드타임과 스위칭 소자의 전압 강하에 의해 왜곡된 전압과 전류를 출력하게 되고 이러한 출력은 토크와 속도에 나쁜 영향을 끼치게 된다. 이러한 문제를 해결하기 위해 전동기의 속도에 따라 DC-link 전압을 가변하여 공급한다.

• Journal of Power Electronics
• /
• 제8권3호
• /
• pp.239-247
• /
• 2008

This paper presents the design of 1 kW prototype high frequency link boost half bridge inverter-fed DC-DC power converters with bridge voltage-doublers suitable for small scale PEM fuel cell systems and associated control schemes. The operation principle of this converter is described using fuel cell modeling and some operating waveforms. The switching mode equivalent circuits are based on simulation results and a detailed circuit operation analysis at soft-switching conditions.

• 조명전기설비학회논문지
• /
• 제20권5호
• /
• pp.49-56
• /
• 2006

양방향 컨버터는 연료전지 발전 시스템의 인버터 dc link와 저전압 배터리를 연결시켜 준다. 방전 모드(boost)에서는 저전압(battery: 48[V])측에서 고전압(dc link: 380[V])측으로, 충전 모드(buck)에서는 저전압측 배터리로 전력이 전달된다. 본 논문에서는 방전모드 시 MOSFET으로 구성된 1.5[kW] 능동 클램프 전류원 풀 브리지 컨버터가 동작하고 배터리 충전 시 IGBT로 구성된 전압원 하프 브리지 컨버터가 동작한다.

• Journal of Electrical Engineering and Technology
• /
• 제8권4호
• /
• pp.752-759
• /
• 2013

This paper proposes a method for fault diagnosis and fault-tolerant control of DC-link voltage sensor for two-stage three-phase grid-connected PV inverters. Generally, the front-end DC-DC boost converter tracks the maximum power point (MPP) of PV array and the rear-end DC-AC inverter is used to generate a sinusoidal output current and keep the DC-link voltage constant. In this system, a sensor is essential for power conversion. A sensor fault is detected when there is an error between the sensed and estimated values, which are obtained from a DC-link voltage sensorless algorithm. Fault-tolerant control is achieved by using the estimated values. A deadbeat current controller is used to meet the dynamic characteristic of the proposed algorithm. The proposed algorithm is validated by simulation and experiment results.

• Journal of Power Electronics
• /
• 제10권1호
• /
• pp.27-33
• /
• 2010

This paper presents a bidirectional DC-DC converter suitable for low-voltage super capacitor-based electric energy storage systems. The DC-DC converter presented here consists of a full-bridge circuit and a current-fed push-pull circuit with a high frequency (HF) transformer-link. In order to reduce the device-conduction losses due to the large current of the super capacitor as well as unnecessary ringing, synchronous rectification is employed in the super capacitor-charging mode. A wide range of voltage regulation between the battery and the super capacitor can be realized by employing a Phase-Shifting (PS) Pulse Width Modulation (PWM) scheme in the full-bridge circuit for the super capacitor charging mode as well as the overlapping PWM scheme of the gate signals to the active power devices in the push-pull circuit for the super capacitor discharging mode. Essential performance of the bidirectional DC-DC converter is demonstrated with simulation and experiment results, and the practical effectiveness of the DC-DC converter is discussed.