• 한국전자파학회논문지
• /
• 제11권3호
• /
• pp.419-428
• /
• 2000

전송선 방정식을 이용하여 선형소자로 종단된 손실이 있는 다중 전송선에서의 누화(crosstalk)와 외부 전자파 에 의한 결합현상을 FDTD 기법으로 해석하였다. 표피효과에 의한 도체의 손실을 고려하여 해석할 경우 전송선 방정식에 컨벌루션 적분이 나타나게 되는데 컨벌루션 적분의 계산량을 줄이기 위해서 프로니(Prony) 방법을 이 용하였다. 또한 저항뿐만 아니라 인덕터나 커패시터로 종단된 다중 전송션을 해석하기 위해 상태변수 표현식 (state-variable formulation)을 이용하였다, TEM(Transverse Electromagnetic) 셀을 이용해서 다중 전송선에서의 누화와 외부 입사장에 의한 전자파 결합현상을 시간영역에서 측정하였고 이론적으로 구한 시율레이션 결과 와 비교하여 잘 일치함을 확인하였다. 또한 PCB와 같이 KSC 3340 TIV보다 상대적으로 손실이 큰 전송선 구조 인 경우 도체의 길이가 짧아도 손실을 포함해야 정확한 예측이 가능함을 확인하였고 저주파에서의 저항은 정상 시간 응답을 결정하고 고주파에서의 임피던스는 초기시간 응답을 결정함을 보였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.143-145
• /
• 2005

This paper describes the transmission method of an information using communication networks between RTU(Remote Terminal Unit) and PCU(Protection and Control System) of the DC switchgear for Light Railway Vehicle. Also the test result carried out in the laboratory was represented. In this test, transmission signal waveform, polling time, response time and request/response frame between RTU and PCU were measured. The field test including the measurements of analog signal and status of the digital logic operation of PCU was conducted in Gyeongsan Test Track.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.397-400
• /
• 2004

The design concept for 8kV light triggering thyristor(LTT) with integrated BOD was discussed here in detail. The trade-off between light triggering input source againsthigh dV/dt limitation has been treated via grooved P-base for gate design. The main application point used for high voltage DC transmission(HVDC) was represented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.186-188
• /
• 2004

This paper describes the feasibility study of HVDC system application to KEPCO power system for increasing power transfer capability or the flexibility of power delivery from one area to the other using the existing transmission line. This paper assumes the 345kV transmission line connecting between Shinokchun and Sedaegu to be converted to the DC line by replacing the AC insulator with that of DC. Then, the HVDC bipole system of 1000MVA with $\pm300kV$ is designed and the contingency studies are carried out.

• Journal of Electrical Engineering and Technology
• /
• 제12권6호
• /
• pp.2089-2098
• /
• 2017

Microgrid is a convenient, reliable, and eco-friendly approach for the integration of Distributed Generation (DG) sources into the utility power systems. To date, AC microgrids have been the most common architecture, but DC microgrids are gaining an increasing interest owing to the provision of numerous benefits in comparison with AC ones. These benefits encompass higher reliability, power quality and transmission capacity, non-complex control as well as direct connection to some DG sources, loads and Energy Storage Systems (ESSs). In this paper, main challenges and available approaches for the protection of AC and DC microgrids are discussed. After description, analysis and classification of the existing schemes, some research directions including coordination between AC and DC protective devices as well as development of combined control and protection schemes for the realization of future hybrid AC/DC microgrids are pointed out.

• 한국전자파학회논문지
• /
• 제24권6호
• /
• pp.613-622
• /
• 2013

본 논문에서는 ISM 13.56 MHz 대역 무선 전력 전송을 위한 인덕티브 클램핑 class-E 전력증폭기를 설계 및 실험하여 특성을 분석하였다. 구현된 전력증폭기는 수신 안테나가 회전체에 붙는 경우와 같이 송수신 안테나 간의 정합 상태가 변화하는 시스템에서 부정합 상태에서 전력증폭기에 공급되는 전류를 줄여 트랜지스터를 손상시키지 않고 안정적으로 동작하도록 하는 인덕티브 클램핑 방식으로 설계되었으며, 정합 회로를 이용하여 기존의 class-E 전력증폭기보다 고조파 성분에 대한 Filtering 특성을 개선하였다. 구현된 전력증폭기의 입력 주파수는 13.56 MHz, 입력 전력 25 dBm, 동작 전압 DC 28 V에서 측정한 결과, 출력 전력은 43 dBm, 기본 주파수 성분과 2차 고조파 신호 간의 출력 전력 차이 55 dBc 이상, 소모 전류 830 mA으로 전력부가 효율(power added efficiency)은 85 %로 높게 측정됐다. 마지막으로, 수신 안테나를 회전체에 부착하고 구현된 전력증폭기로 송수신 안테나로 전력을 송출하는 실험을 진행하였으며, 송신 안테나의 부정합 상태에는 소모 전류가 420 mA까지 줄어들어 트랜지스터가 손상되지 않는 것을 확인하였다.

• Journal of Power Electronics
• /
• 제18권2호
• /
• pp.395-406
• /
• 2018

Marine controlled-source electromagnetic transmitters (MCSETs) are important in marine electromagnetic exploration systems. They play a crucial role in the exploration of solid mineral resources, marine oil, and gas and in marine engineering evaluation. A DC-DC controlled-source circuit is typically used in traditional MCSETs, but using this circuit in MCSETs causes several problems, such as large voltage ringing of the high-frequency diode, heating of the insulated-gate bipolar transistor (IGBT) module, high temperature of the high-frequency transformer, loss of the duty cycle, and low transmission efficiency of the controlled-source circuit. This paper presents a clamping-diode circuit for MCSET (CDC-MCSET). Clamping diodes are added to the controlled-source circuit to reduce the loss of the duty ratio and the voltage peak of the high-frequency diode. The temperature of the high-frequency diode, IGBT module, and transformer is decreased, and the service life of these devices is prolonged. The power transmission efficiency of the controlled-source circuit is also improved. Saber simulation and a 20 KW MCSET are used to verify the correctness and effectiveness of the proposed CDC-MCSET.

• 전기학회논문지
• /
• 제63권12호
• /
• pp.1640-1648
• /
• 2014

This paper proposes a switching frequency reduction method for MMC (Modular Multilevel Converter) utilizing redundancy operation of sub-module, which can offer reduction of voltage harmonics and switching loss. The feasibility of proposed method was verified through computer simulations with PSCAD/EMTDC software. Based on simulation analysis, a hardware scaled-model of 10kVA, DC-1000V MMC was designed and manufactured in the lab. Various experiments were conducted to verify the feasibility of proposed method in the actual hardware system. The hardware scaled-model can be effectively utilized for analyzing the performance of MMC according to the modulation scheme and redundancy operation.

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권4호
• /
• pp.55-59
• /
• 2018

Currently, the development of industry makes needs larger electric supply. Providers must consider the efficiency about losses and reliability of the system. In this case, DC power system can save electrical energy; long-distance transmission line losses. Relevance to switch technology with a voltage-source converter (VSC) in AC-DC conversion system have been researched. But, protection device of DC-link against fault current is still needed to study much. VSC DC power system is vulnerable to DC-cable short-circuit and ground faults, because DC-link has a huge size of capacitor filter which releases extremely large current during DC faults. Furthermore, DC has a fatal flaw that current zero crossing is nonexistence. To interrupt the DC, several methods which make a zero crossing is used; parallel connecting self-excited series LC circuit with main switch, LC circuit with power electronic device called hybrid DC circuit breaker. Meanwhile, self-excited oscillator needs a huge size capacitor that produces big oscillation current which makes zero crossing. This capacitor has a quite effective on the price of DCCB. In this paper, hybrid self-excited type superconducting DCCB which are using AC circuit breaker system is studied by simulation tool PSCAD/EMTDC.

• ETRI Journal
• /
• 제31권3호
• /
• pp.348-350
• /
• 2009

To fit the limited volume and power consumption of the passive radio frequency transmission system of the electronic time fuze, an improved coded mark inversion (CMI) is proposed in this letter. From the performance analysis, the energy transmission efficiency of this encoding method is at least 50% higher than that of CMI and NRZ. Finally, the experiment results show that by adopting this improved CMI, the change of DC voltage through magnetic coupling is lower than 0.2 V when the accuracy of data transmission is above 99.5%.