• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.2
• /
• pp.146-154
• /
• 1989

A new design method for matching GaAs FET amplifiers using DC block consisting of non-symmetrical two-microstrip line is presented. The non-symmetrical DC block has not only the function of DC block, but the function of impedance matching. Because of the above merits the non-symmetrical DC block can be used for MIC anc MMIC. The measured frequency responses exhibit a symmetrical characteristics at the center frequency, 4(GHz).

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.3
• /
• pp.141-146
• /
• 2001

This paper presents a one digital controller two topology PWM DC-DC converter that controls, simultaneously, the separate Buck converter and boost converter with the different specification by using an inexpensive and efficient 8 bit micro-controller. One timer interrupt is used for the detection of output feedback voltage, and other two timer interrupts are used for the generation of PWM waveform for Buck and Boost converter. The control characteristics of one digital controller two topology PWM DC-DC converter is validated by experimental results.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.195-197
• /
• 2001

This paper presents the circuit modeling and Control methods of PWM DC/DC Converter with Isolated dual outputs. The dual output converter topology is consisted of the two switch and single secondary winding. The control algorithm which is used by an adjusted PI control methods, of Dual Output PWM DC/DC converter is proposed in this paper. The proposed adjusted PI control method has faster response characteristics than conventional PI control methods at load change. The validity of the proposed adjusted control method is verified with the several interesting simulation results.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.847-848
• /
• 2006

최근 안전인증 기술기준의 국제규격(IEC) 부합화에 따라 소형 퓨즈의 DC 시간/전류 특성(DC Time/Current characteristic, 이하 DC 용단특성)에 대한 시험이 중요한 성능평가항목으로 부각되고 있다. 특히 DC 용단특성을 시험하기 위해서는 규격에 적합한 DC 발생기 및 DC 용단시간도 정확하게 측정할 수 있는 시스템이 구축되어야 하므로, 그 성능 평가설비 또한 매우 중요하다고 할 수 있다. 본 논문에서는 안전기준 및 IEC 국제규격을 분석하고, 분석된 규격을 토대로 성능평가설비를 설계하여 국제적 수준의 시험기관 위상에 걸맞은 성능평가기술 기반을 구축하였다. 구축된 설비 및 개발된 성능평가기술은 향후 시험평가기술의 국제화에 중요한 역할을 할 것으로 기대된다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.4
• /
• pp.313-320
• /
• 2015

This study deals with a bidirectional interleaved soft switching DC-DC converter for a wide range of input voltages. The proposed converter operates in complementary switching with the purpose of inductor size reduction and zero-voltage switching (ZVS) operation. The current ripple related to complementary switching is minimized by three-phase interleaved operation. The main characteristics of the proposed topology are its soft-switching method of operation and its simple structure. The soft-switching operation and the system efficiency of the proposed converter are verified by experimental results.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.383-386
• /
• 2005

In this paper, proposed new partial resonance ZCS PWM controlled High frequency insulated Full-bridge DC-DC converter not using exciting current of high frequency transformer. It is compared with the existing principles in characteristics. It also realizes a widely stabilized ZVS operating using new ON-OFF control method at synchronized power rectification MOSFET of high frequency insulated transformer secondary. Besides, it is brought over 97[%] measurement efficiency by proposed DC-DC converter.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.2
• /
• pp.86-90
• /
• 2001

This paper presents a multi output converter system that controls, simultaneously, the separate buck converter and boost converter with the different specification by one digital controller using fuzzy algorithm. As two separate converters are regulated by only one DSP, it is possible to achieve the simple digital control circuit for regulating multi output DC-DC converter. Inference procedure of fuzzy controller is included. The control characteristics of each PWM DC-DC converter is validated by experimental results.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.349-350
• /
• 2017

본 논문에서는 배터리 충 방전용 양방향 DC-DC 컨버터의 필터 인덕턴스와 제어특성의 영향을 분석한다. 필터 인덕턴스의 값을 변경하여 기존의 제어기법과 개선된 제어기법에 따른 특성 변화를 3 kW급 양방향 2상 인터리빙 DC-DC 컨버터 회로에 적용하여 분석하였으며 시뮬레이션을 통해서 타당성을 검증하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.8
• /
• pp.55-62
• /
• 2015

This paper deals with a switching method to minimize the current ripple component of 3-phase interleaved bidirectional DC-DC converter for charging and discharging of the battery. The characteristics of the output current ripple in 3-phase and 2-phase operation modes according to the variation of battery voltage is analyzed and a phase conversion method for minimizing the magnitude of the current ripple is proposed. The proposed method can extend the light load range because the switching frequency is lower than that of a 3-phase operating system. Simulation and experimental results show the usefulness of the proposed method.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.405-406
• /
• 2014

This paper presents the one direction 3-phase DC-DC converter. The converter employs DC-AC inverter, 3-phase 1:N transformer and 3-phase full wave rectification circuit make low voltage direct current to high voltage direct current. By computer simulation and experiment, the theoretical results can be verified or modified. Finally, the simulation and experiment results are presented. Compared with the general DC converter, has anti-interference ability, high reliability, high output power, range and other characteristics, widely used, fully isolated input and output, the output of the multiplexer is not limited, polar optional.