• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.226-226
• /
• 2009

남북한 간의 전철 전력 설비의 연계 혹은 개량은 다양한 문제점이 발생이 가능하고 각종 기준 및 레벨의 차이가 심각하다. 따라서, 북한의 전기설비의 개량을 위한 전철 전력설비의 노후도 진단기술, 전압안전성 평가, 상호연계를 위한 시뮬레이션, 안전기준 마련등 광범위한 분야의 실용적 접근이 필요하다. 본 논문에서는 남북 및 대륙철도의 실용주의적 접근을 위하여 인프라 분야인 전철 분야의 표준화 방향에 대하여 기술하였다. 이를 위하여 북한 전철 설비의 전압, 지지물, 브래키트, 급전선, 조가선, 전차선, 장력조정장치, 조가방식, 전차선높이, 가고를 각각 분석 하였다.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1280-1285
• /
• 2004

ADC railway system has low feeder voltage, The fault current can be smaller than the current of load starting. So it is important to discriminate between the small fault current and the load starting current. The load starting current increases step by step but the fault current increases all at once. As for the load starting current, the time constant of load current at each step is much smaller than that of the fault current. First, to detect faults in DC railway systems, an algorithm using the time constant calculated by the method of least squares is presented in this paper.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1505-1510
• /
• 2007

In this paper, the power simulation is used for the prediction of regenerative energy and examination of install location of regenerative inverter for DC railway system. The power simulation was composed to train performance simulation(TPS) and power flow simulation. We performed the power simulation for Seoul subway line 5 and 7, calculation of regenerative energy and examination of substations where regenerative inverter is installed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.11
• /
• pp.1737-1742
• /
• 2012

The scott transformer is used to supply single-phase power to the AC railway system. Since the scott transformer is a passive facility, it cannot regulate load-side voltage according to load change. Meanwhile, the Voltage Source Converter (VSC) is able to convert the voltage and control active and reactive power. In this paper, the feasibility of a AC railway system based on Back-to-Back (BTB) VSC which is composed of a rectifier, a DC-DC converter, a inverter, has been proposed. A three-phase to single-phase BTB VSC is modeled. The proposed AC railway system based on BTB VSC is tested on Matlab/Simulink.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1042-1043
• /
• 2015

미니트램(Mini-Tram)은 승하차 시간 동안 정거장에서의 무선급전 방식에 의한 급속충전(약, 2분 30초 이내)을 통해 에너지를 공급받으며, 운행 시 차상에 설치된 에너지저장 매체(LIC: Lithium-Ion Capacitor)로부터 전기에너지를 공급받아서 운행된다. 차량에 요구되는 에너지 소모량을 분석하고 이에 맞춰서 저장 매체의 직-병렬 구성 및 전력 변환 장치(Regulator 및 DC-DC 컨버터 등)를 설계하는 것은 전기 구동 차량인 미니트램의 설계에서 매우 중요한 부분이다. 본 논문에서는 미니트램 시스템을 개발하는 과정에서 수행된 에너지공급시스템의 사양 선정을 위한 에너지 소모량 예측과 더불어 이와 관련된 주행저항 및 주행성능 분석에 대해서 다룬다.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.224-226
• /
• 2004

Digital Kalman filter is presented as a powerful approach to obtain the reference estimation of the control current for shunt active power filter. This algorithm provides the best estimate of the fundamental and harmonic frequency components from the sampled values of the line current or voltage. By adopting of the digital Kalman filtering algorithm, the structure of the control algorithm eliminates the need of a Phase locked loop(PLL) for the synchronization of the reference signal used in the compensation and it not sensitive to the distortion of the line voltage. The effectiveness of the algorithm is confirmed by the computer simulations.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.373-375
• /
• 2003

The subway, a typical electrified transit, is operated by the 1500 V DC-powered system with the overhead positive feeder and the rails negative return. This return path would bring about considerable stray current circuits, that is, from the bottom of rails to sell and then to the station ground, unless the rail-to-soil resistance is sufficiently high. The stray current can cause electrolytic corrosion of subway metallic structures and adjacent underground utilities. In this paper, we reports on-site investigation of the stray current condition, especially influenced by drainage method. The drainage method including both forced drainage and polarized drainage, extensively adopted as a countermeasure for electrolytic corrosion of underground pipelines, was found out to exert a harmful influence upon rail components as well as the pipelines.

• Journal of the Korean Institute of Gas
• /
• v.13 no.2
• /
• pp.1-6
• /
• 2009

With respect to a given structure, a stray current is to be defined as a current flowing on a structure that is not part of the intended electrical circuit. Most often DC-powered traction systems like railroads and tramlines are responsible for large dynamic stray currents. This type of stray current is generally results from the leakage of return currents from large DC traction systems that are grounded or have a bad earth-insulated return path. At the place where the current leaves the rail and metallic structures, electrolytic corrosion may take place. This paper investigates the domestic conditions on the electrolytic corrosion protection of buried metallic structures adjacent to DC traction systems by survey.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1297-1302
• /
• 2004

In DC power distribution system for urban rail transits potential relay, 64P, is used to detect the ground faults. The problem with this 64P is that though it detects the ground fault it cannot identify the faulted region. Therefore the faulted region cannot be isolated properly. It could results in power loss of the trains on the healthy regions and the safety of the passengers in the trains could be affected adversely. A new ground fault protective relaying scheme that can identify the faulted region is presented in this paper. The new concept uses the current differential scheme and the permissive scheme to identify the faulted region correctly. A device with similar characteristic to the arrestor is adapted to use the current relay for the ground fault detection. The role of the device is to block the ground leakage current in normal operating condition and enable the ground fault current to flow in ground fault condition. The algorithm of the new relay and the effect of the newly adapted device in the new relaying scheme are discussed.

• Journal of the Korean Society for Railway
• /
• v.18 no.6
• /
• pp.533-542
• /
• 2015

This paper suggest away to maintain constant power through trolley wire by transferring increased line voltage to the AC main line while changing the mode from Converter(Forward) to Inverter(Reverse) when the line voltage is increased due to regenerative power when the train stops, This paper suggests a Double Converter DC substation that can create regenerative power when the train stops reusable. We also proposed using a simulation tool, the optimal Thyrister firing angle that can minimize the undershoot and overshoot that occurs when transferring the mode from Converter to Inverter for quality improvement of DC voltage in the Double Converter in the DC substation from the Busan Urban Subway.