• 미생물학회지
• /
• 제54권1호
• /
• pp.46-52
• /
• 2018

다환 방향족 탄화수소(polycyclic aromatic hydrocarbon, PAH) 우수 분해균주인 Novosphingobium pentaromativorans US6-1의 dibenzofuran (DBF) 분해경로를 밝히기 위하여 중간대사물질 분석과 전사체 분석을 진행하였다. GC/MS로 중간대사물질을 분석한 결과, 3(2H)-벤조퓨라논이 검출되었는데 이 화합물은 측면 이산소화에 의해 생성된 중간대사산물들의 기본 골격이 되는 물질로써 균주 US6-1에 의한 DBF의 분해가 측면 이산소화로 진행될 가능성을 시사한다. RNA-Seq 분석 결과, 균주 US6-1이 DBF에 노출되었을 때 발현되는 유전자들의 대부분이 lateral dioxygenation과 관련이 있다는 것을 확인하였다. 이상의 결과로부터N. pentaromativorans US6-1에 의해 일어나는 측면 이산소화를통한 DBF 분해경로와 관련 유전자들을 제시하였다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.219-223
• /
• 2003

This paper describes an estimation of DOA(Direction Of Arrival) measurement system using DBF receiver with linear array antenna. This DBF receiver is composed of resistive FET mixer using low IF mettled. A radio frequency(RF), a local oscillator(LO) and ail intermediate frequency(IF) considered in this research are 2.09 GHz, 2.08 GHz and 10 MHz, respectively. This receiver is composed of a band-pass filter, a low-pass filter, a DC bias circuit. DOA measurement system is consist of linear array antenna, DBF receiver, AD control box and computer in the anechoic chamber. Receiving antenna is 4-array monopole antenna and DBF receiver is 4-Ch resistive FET mixer without amplifier. DOA algorithm is implemented using MUSIC algorithm with high resolution. We show that the results of DOA is $-30^{\circ},\;0^{\circ}$ and $60^{\circ}$, respectively. And we know that DOA estimation error occur by antenna radiation pattern and fabrication error of antenna array.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.16-20
• /
• 2002

This paper describes the resistive FET mixer with low IF for the 4-Ch DBF(Digital Beam Forming) receiver with LNA(Low Noise Amplifier). This DBF receiver based on the direct conversion method is generally suitable for high-speed wireless mobile communications. A radio frequency(RF), a local oscillator(LO) and an intermediate frequency(IF) considered in this research are 2.09 ㎓, 2.08 ㎓ and 10㎒, respectively. The RF input power, LO input power and Vgs are used -10㏈m, 6㏈m and -0.4 V, respectively. In the 4-Ch resistive FET mixer with LNA, the measured IF and harmonic components of 10㎒, 20㎒, 2.09㎓ and 4.17㎓ are about -12.5 ㏈m, -57㏈m, -40㏈m and -54㏈m, respectively. The IF output power observed at each channel of 10㎒ is about -12.5㏈m and it is higher 27.5 ㏈m than the maximum harmonic component of 2.09㎓. Each IF output spectrum of the 4-Ch is observed almost same value and it shows a good agreement with the prediction.

• Archives of Plastic Surgery
• /
• 제49권1호
• /
• pp.99-107
• /
• 2022

Background Dermal backflow (DBF), which refers to lymphatic reflux due to lymphatic valve insufficiency, is a diagnostic finding in lymphedema. However, the three-dimensional structure of DBF remains unknown. Photoacoustic lymphangiography (PAL) is a new technique that enables the visualization of the distribution of light-absorbing molecules, such as hemoglobin or indocyanine green (ICG), and can provide three-dimensional images of superficial lymphatic vessels and the venous system. This study reports the use of PAL to visualize DBF structures in the extremities of patients with lymphedema after cancer surgery. Methods Patients with a clinical or lymphographic diagnosis of lymphedema who previously underwent surgery for cancer at one of two participating hospitals were included in this study. PAL was performed using the PAI-05 system. ICG was administered subcutaneously in the affected hand or foot, and ICG fluorescence lymphography was performed using a near-infrared camera system prior to PAL. Results Between April 2018 and January 2019, 21 patients were enrolled and examined using PAL. The DBF was composed of dense, interconnecting, three-dimensional lymphatic vessels. It was classified into three patterns according to the composition of the lymphatic vessels: a linear structure of lymphatic collectors (pattern 1), a network of lymphatic capillaries and lymphatic collectors in an underlying layer (pattern 2), and lymphatic capillaries and precollectors with no lymphatic collectors (pattern 3). Conclusions PAL showed the structure of DBF more precisely than ICG fluorescence lymphography. The use of PAL to visualize DBF assists in understanding the pathophysiology and assessing the severity of cancer-related lymphedema.

• Journal of electromagnetic engineering and science
• /
• 제4권4호
• /
• pp.143-149
• /
• 2004

This paper describes characteristics of the single-balanced low IF resistive FET mixer for the digital beam forming(DBF) receiver. This DBF receiver based on the direct conversion method is designed with Low IF I and Q channel. A radio frequency(RF), a local oscillator(LO) and an intermediate frequency(IF) considered in this research are 1950 MHz, 1940 MHz and 10 MHz, respectively. Super low noise HJ FET of NE3210S01 is considered in design. The measured results of the proposed mixer are observed IF output power of -22.8 dBm without spurious signal at 10 MHz, conversion loss of -12.8 dB, isolation characteristics of -20 dB below, 1 dB gain compression point(PldB) of -3.9 dBm, input third order intercept point(IIP3) of 20 dBm, output third order intercept point(OIP3) of 4 dBm and dynamic range of 30 dBm. The proposed mixer has 1.0 dB higher IIP3 than previously published single-balanced resistive and GaAs FET mixers, and has 3.0 dB higher IIP3 and 4.3 dB higher PldB than CMOS mixers. This mixer was fabricated on 0.7874 mm thick microstrip $substrate(\varepsilon_r=2.5)$ and the total size is $123.1\;mm\times107.6\;mm$.

• Journal of electromagnetic engineering and science
• /
• 제2권2호
• /
• pp.117-123
• /
• 2002

This paper describes the design for the resistive FET mixer with low If for the 4-Ch DBF(Digital Beam Forming) receiver This DBF receiver based on the direct conversion method is generally suitable for high-speed wireless mobile communications. A radio frequency(RF), a local oscillator(LO) and an intermediate frequency(If) considered in this research are 2.09 GHz, 2.08 CHz and 10 MHz, respectively. This mixer is composed of band pass filter, a low pass filter and a DC bias circuit. Super low noise HJ FET of NE3210S01 is considered in design. The RE input power, LO input power and Vcs are used -10 dBm, 6 dBm and -0.4 V, respectively. In the 4-Ch resistive FET mixer, the measured If and harmonic components of 10 MHe, 20 MHz and 2.087 CHz are about -19.2 dBm, -66 dBm and -48 dBm, respectively The If output power observed at each channel of 10 MHz is about -19.2 dBm and it is higher 28.8 dBm than the maximum harmonic component of 2.087 CHz. Each If output spectrum of the 4-Ch is observed almost same value and it shows a good agreement with the prediction.

• 대한토목학회논문집
• /
• 제6권4호
• /
• pp.69-78
• /
• 1986

본 연구에서는 earth dam의 파괴로부터 야기되는 유출수문곡선을 유도하고, 홍수파가 자연하도를 통하여 하류로 전파되어 나가는 과정을 추적하기 위하여 dynamic wave equation을 구성하고, 이 식을 Preissmann scheme과 double sweep법을 이용하여 해석하는 DBF(Dam Break Floodwave) 요형을 개발하였다. 본 모형을 Teton dam에 적용하여 댐 파괴로 인한 홍수파의 첨두수위, 청두유량, 도달시간 및 범람 범위 등을 계산하였고, 실측자료와의 비교검토를 통하여 본 모형의 적용성을 입증하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.880-882
• /
• 2004

This paper presents the design and simulation results of 7 waveguide dielectric rod array antennas for 7 channel DBF(Digital beamformer) receivers for stratospheric system. A waveguide. dielectric antenna type, which has FTEP(Flat-toped element pattern) to manufacture easily. Also, the calculated element patterns according to the permittivity are compared. The designed antenna will be used for generating multibeam radiation pattern by means DBF.

• 전자통신동향분석
• /
• 제21권2호통권98호
• /
• pp.200-209
• /
• 2006

가입자의 수가 놀라운 비율로 증가하고 고품질. 광대역 데이터 통신에 대한 요구가 증가하면서 이동 통신에 사용되는 주파수원이 부족하게 될 것으로 예상된다. 주파수의 재사용률을 향상시키기 위하여 공간적인 방향성을 가지는 안테나를 이용하는 것과 송신하는 전력을 줄이는 것은 주파수원의 효율적인 사용을 할 수 있게 할 것이다. 가까운 미래에는 도달하는 신호를 빨리 추적하는 높은 이득을 가지는 안테나가 많이 요구될것이고 빠르게 성장할 것으로 기대된다. 그런 다양한 기능을 가지는 안테나를 실현하기 위하여 디지털 빔 형성 안테나가 미래의 지능 안테나로 제안되었다[1], [2]. 따라서 본 논문에서는 디지털 빔 형성(digital beam forming, 이하 DBF라 한다.) 안테나의 빔형성 방법, 원리, 특징에 대하여 살펴볼 것이다.

• 한국정보통신학회논문지
• /
• 제23권5호
• /
• pp.568-573
• /
• 2019

최신의 레이더는 동시에 다양한 다수의 표적을 탐색하고, 추적하며, 외부 재밍신호를 회피할 수 있는 다기능레이더 형태로 발전하고 있다. 이러한 다기능레이더 요구사항을 만족시키기 위해서 레이더 안테나는 실시간 빔조향 뿐만 아니라 동시에 다중 빔을 형성하고, 특정 방향에 대해 수신빔 제거 등 디지털 빔 형성이 가능한 능동위상배열 안테나 형태로 구현된다. 본 논문에서는 디지털 빔 형성이 가능한 부배열 타입 배열안테나의 하드웨어 구현방안에 대해 기술하였다. 또한 배열수신빔 형성시 부엽 준위를 낮추기 위한 안테나 개구면 진폭 가중치 적용방법에 따른 부배열 수신기 설계 방법을 제시하고, 진폭 가중치 적용방법에 따른 G/T 성능을 비교하였다. 또한 설계된 부배열 마다 부배열 수신기 동적 영역에 대해 분석하고, 디지털 빔형성기의 정렬 및 보정에 더 유리한 하드웨어 구현 방안을 제시하였다.