• 한국항공우주학회지
• /
• 제34권4호
• /
• pp.102-109
• /
• 2006

본 논문에서는 검증위성(KoDSat)의 시스템 레벨 전자기파(EMC) 환경시험 및 전자기파(EMC) 규격을 초과한 시험결과에 대해서 발사체에 대한 영향성 분석 및 하드웨어 개선 방법에 대하여 논하고, EMC2000 소프트웨어 해석을 통해 KSLV-1 발사체의 비행종단시스템(FTS : Flight Termination System)에 영향을 줄 수 있는 검증위성의 전자기파 노이즈원을 도출하였다. 또한 도출된 전자기파(EMC) 노이즈원은 EMI 필터, 접지, 쉴딩(Shielding) 처리 기법을 데이터획득장치(DAU) 전력보드(Power Board)에 적용하여 미약한 값으로 제거되었다. 그리고 이와 같은 일련의 분석과정에 의해 새로 설계된 전력보드는 검증차원에서 데이터획득장치(DAU)에 장착되어 박스자체 전자기파(EMC) 시험 및 최종 2차 검증위성 시스템 레벨 전자기파 시험을 통해 확인되었고, 측정 결과는 저주파대역과 UHF 주파수대역(430Mhz)에서 만족할 만한 감쇄레벨 값을 나타내었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권1호
• /
• pp.153-161
• /
• 2008

Recently, the research and development of the fish cage in open sea from domestic is active and it is almost complement with commercial scale test on 'seogwipo'. But domestic technology is not sufficient of management RMS(Remote Monitoring System) with advanced country, so it is difficult to maintenance and monitor fish cage in open sea. This paper introduces a fish cage environmental monitoring system for measuring pH, DO and temperature. A signal is treated with DAU(Data Acquisition Unit) by a wireless communication method and transfers data to host computer for data processing. These data are graphically shown on the monitor with LabVIEW program and logged on the data processing system in the form of file.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.273-274
• /
• 2006

The sea is origin of all lift, and 90% of the all living organisms are in the sea. The biosynthesis is very different. Many organisms are kept on a lower or developed to another evolutionary level than on shore. Our society is increasing demand and need for marine food and this food has to product at onshore or offshore fish farming sites. Ocean fish farms have a special operation properties such as a good quality water, net cage, sheltered locations and feeding system. The farming site is controlled and monitored for fish welfare as ammonia($NH_3$), temperature, the speed of a running fluid. Specially, the fish farm is seriously influenced by ammonia. In this paper, $NH_3$ monitoring system for ocean fish farm is researched for the suitable fish farming sites, and test equipment is designed for achieving practical data. The equipment wit monitoring algorithm is expected to the useful system for ocean fish farm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1626-1628
• /
• 2003

The lightning arrester is a very important overvoltage protection device in the electric power system. Therefore, the inspection of lightning arrester whether it keeps its performance or not properly has close related to verifying the safety confidence of the electric power system. But the development of the deterioration measuring method and on-line detecting system, is necessary to monitor the deterioration of the lightening arrestor. In this paper, we developed the lightning arrester degradation monitoring system. This system detected leakage current of lightning arrester by using the ZCT, and analyze the third harmonics ingredient of leakage current using DFT method in the Data Acquisition Unit(DAU). The analyzed current signal is transmit to the Human-Machine Interface(HMI), and HMI alarmed when accident are occurred and informed with the amplitude of leakage current to the operator.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1732-1737
• /
• 2004

This paper proposes Internet-based checking technique for machine-tools with variant CNC (Computerized Numerical Controller). According to the architecture of CNC, CNC is classified into two types such as CAC (Closed Architecture Controller) which is conventional CNC, and OAC (Open Architecture Controller) which is a recently introduced PC-based controller. CAC has a closed architecture and it is dependent on CNC vender specification. Because of this, it has been very difficult for users to implement an application programs in CNC domain. Therefore, an additionally special module is required for Internet-based application such as remote checking. In this case, web I/O embedded module can be efficiently applied for Internet-based checking. The module is directly attached to TCP/IP network for communication. In order to obtain the monitoring data of CNC machines, the I/O signals of the module are assigned to PLC (Programmable Logic Controller) input and output (I/O) signals within CNC domain. On the other hand, OAC has a PC-based open architecture and an additional module is not necessary for the connection with external site. Because of this, a simple DAU is just used for signal sensing and data acquisition without additional communication modules. For Internet-based remote checking of machine-tools with OAC, a user-defined daemon and application programs are implemented as the form of internal function within the PC-based controller. Internet communication is performed between the daemon program in CNC domain and web script programs in external server. Checking points defined in this research are classified into two categories such as structured point and operational point. The formal includes the vibration of bearing, temperature of spindle unit and another periodical management. And the latter includes oil checking, clamp locking/unlocking and machining on/off status.