• Journal of radiological science and technology
• /
• v.40 no.3
• /
• pp.393-400
• /
• 2017

The purpose of this study is to suggest a method to reduce the dose by Analyzing the dose area product (DAP) and image quality according to the change of tube current using NEMA Phantom. The spatial resolution and low contrast resolution were used as evaluation criteria in addition to signal to noise ratio (SNR) and contrast to noise ratio (CNR), which are important image quality parameters of intervention. Tube voltage was fixed at 80 kVp and the amount of tube current was changed to 20, 30, 40, and 50 mAs, and the dose area product and image quality were compared and analyzed. As a result, the dose area product increased from $1066mGycm^2$ to $6160mGycm^2$ to 6 times as the condition increased, while the spatial resolution and low contrast resolution were higher than 20 mAs and 30 mAs, Spatial resolution and low contrast resolution were observed below the evaluation criteria. In addition, the SNR and CNR increased up to 30 mAs, slightly increased at 40 mAs, but not significantly different from the previous one, and decreased at 50 mAs. As a result, the exposure dose significantly increased due to overexposure of the test conditions and the image quality deteriorated in all areas of spatial resolution, low contrast resolution, SNR and CNR.

• Journal of radiological science and technology
• /
• v.39 no.3
• /
• pp.407-414
• /
• 2016

This study is to minimize the patient dose and maintain the image quality according to change of source to image receptor distance and applying additional filter. In this study, we used the DR system, the tissue-equivalent abdomen phantom and the aluminium filter. The exposure conditions were set to 80 kVp using AEC mode. The collimation size was $16{\times}16inch$. The exposure dose were measured 10 times when the SID was changed with 100, 110, 120 and 130 cm, respectively. The pirana 657 for dosimeter was located on center of radiation irradiation. The acquired images were analyzed by using the image J. In the results, the tube current was increased with increasing the SID but ESD was decreased with increasing the SID. The decrease of ESD attribute to use of filter that remove the photon of lower energy. In the histogram results using image J, there were differences between the ESD and the exposure conditions according to change of SID. However, there were not differences in histogram. Therefore, the exposure dose could reduced when set the longer SID. For pediatric exam, the exposure dose could reduced when used the aluminium filter.

• Korean Journal of Food Science and Technology
• /
• v.46 no.2
• /
• pp.143-147
• /
• 2014

In this study, we investigated the effect of various yeast nutrients on stuck and sluggish fermentation of blueberry wine. Sugar consumption rates during fermentation were observed after the addition of yeast extract, diammonium phosphate, yeast energizer, raisin, or banana to fermenting blueberry wine. After fermentation, the alcohol concentrations of wines containing yeast extract (14.1%) and banana (13.3%) were higher than those of wines containing diammonium phosphate (12.6%), yeast energizer (12.4%), and raisin (11.4%). Correspondingly, levels of soluble solids were lower in wines to which yeast extract ($3.9^{\circ}Bx$) and banana ($2.5^{\circ}Bx$) were added than in wines to which diammonium phosphate ($4.6^{\circ}Bx$), yeast energizer ($4.6^{\circ}Bx$), and raisin ($6.3^{\circ}Bx$) were added. Thus, we concluded that banana could be used as a nutritional supplement for yeast to solve stuck and sluggish blueberry wine fermentation.

• Journal of Korea Foundry Society
• /
• v.22 no.1
• /
• pp.42-48
• /
• 2002

Effects of coating treatment of metallic Cu, Ni-P film on $SiC_p$, for $SiC_p$/iron aluminide composites were studied. Porous hybrid preforms were fabricated by reactive sintering after mixing the coated $SiC_p$, Fe and Al powders. Then the final composites were manufactured by squeeze casting after pouring AC4C Al alloy melts in preforms. The change of reactive temperature, density, microstructure of the preforms and microstructure of the composites were investigated. The exprimental results were summarized as follows. The thickness of Cu and Ni-P metallic layer formed on $SiC_p$ by electroless plating method were about $0.5{\mu}m$ and coated uniformly. There was no remakable change in the ignition temperature with variation of the mixing ratio of Fe and Al powder while in the case of coated $SiC_p$ it was lower about $20^{\circ}C$ than in the non-coated $SiC_p$. The maximum reaction temperature increased with increasing Al contents, but decreased with increasing $SiC_p$ contents. Expansion ratio of preform after reactive sintering increased with amount of Cu coated $SiC_p$. In the case of Fe-70at.%Al, the expansion ratio was about 7% up to 8wt.% of $SiC_p$, addition but further addition of $SiC_p$, increased the ratio significantly. And in the case of Fe-50 and 60at.%Al, it was about 20% up to 16wt.% of $SiC_p$ addition and about 28% in 24wt.% of $SiC_p$, addition. The microstructures of compounds showed that the grains became finer as amount of $SiC_p$, and mixing ratio of iron powder increased and the shape of compounds was changed gradually from irregular to spheroidal.

• Weed & Turfgrass Science
• /
• v.4 no.4
• /
• pp.315-320
• /
• 2015

Burcucumber (Sicyos angulatus) is an annual invasive plant species originated from North America. This species grows by twining around tree trunks, and blocks other plants from photosynthesis. Thus, it has caused the destruction of the ecosystem and biological diversity by threatening native plants. This study was performed to find out the effect of different soil water content (20%, 13%, 10%, 3%) and various shading degrees (0%, 60%, 80%) on the growth and photosynthesis-related activity of burcucumber. In the responses of burcucumber to soil water content, plant height (PH), leaf length (LL), leaf width (LW) and photosynthetic efficiency (PE) were lower at 20% water content than 10% reflecting that burcucumber plant grow well in the less dry soil and shows poor growth under wet soil condition. In shading experiment, PH, LL, LW and PE were lower at 80% than 60% shading and in general, the growth characteristics were lowered as the shading intensity increased. The improved growth of burcucumber under highly or moderately shaded condition implies that the plant can grow well without growth retardation and can be adapted to shading condition with other tall plant species including tree. Further study on the combination effects of above factors should be conducted in future for effective ecological control of burcucumber.

• Journal of radiological science and technology
• /
• v.28 no.3
• /
• pp.241-248
• /
• 2005

X-ray examinations represent the largest man-made source of radiation exposure for the population. The need for standardization of radiation exposures has been suggested and the guidance levels for various radiographic and radioisotope examinations has been proposed by the International Atomic Energy Aency(IAEA) as a safety standard. In many countries, the situation of medical radiographic exposures in each country should be researched before the appropriate guidance level is established. In this study, measurements of entrance surface dose, dose-area product(DAP), computed tomograghic dose index(CTDI) and mean glandular dose(MGD) were carried out in patients who underwent routine x-ray examinations, fluoroscopy, computed tomograghy and mamography in Korea. These measured quantities were compared with the results from the calculation method in previous study. And we suggested diagnostic reference levels in medical imaging in Korea.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.3
• /
• pp.296-300
• /
• 1988

A trial product of monogranular compound fertilizer for sesame under vinyle mulching cultivations was manufactured using the principal sources of urea, diammonium phosphate and muriate of potash in combination with a filler of zeolite and a binder of liquid waste from glutamic acid fermentation. Two field experiments using transparent vinyl mulching for single-crop cultivation and black vinyl mulching for cultivation after wheat and barley cropping were carried out to evalute their effects on sesame and the results obtained were as follows. Plant height and stem diameter of the trial product in sesame plant were higher and better than those of NPK split application and NPK all basic application. As the yield of the trial product was higher and similar to the NPK application plots in transparent and black vinyl mulching treatment respectively, the one time basic application of a developed monogranular compound fertilizer for sesame was possible under vinyl mulching cultivation.

• The Journal of the Korea Contents Association
• /
• v.18 no.11
• /
• pp.508-515
• /
• 2018

The purpose of this study was to analyze the errors of the built - in dose area product and the calibrated moving dose area product when using automatic exposure controller of the interventional equipment. And then, the importance of the dosimeter calibration and the necessity of the calibration guideline were investigated. The experimental method was to assemble the phantom into Thin, Normal, and Heavy Adult according to the NEMA Phantom manual and to measure the dose area with the built-in dose area product and the moving dose area product. As a result, in all thicknesses, the built-in dose area product showed higher doses than the moving dose area product, and the thicker the thickness, the larger the difference. In addition, paired t-test was performed for each item and there was a significant difference in each item between p<0.05. In conclusion, considering the intervention which is highly exposed to the radiation exposure, it is that we have to know the accurate dose when using the AEC of the equipment. And there is no calibration guide for the built-in dose area meter, thus calibration guidelines should be prepared.

• The Southeast Asian review
• /
• v.26 no.3
• /
• pp.91-118
• /
• 2016

As all are aware, the results of the Malaysia 12th General Election (GE-12) in 2008 have surprised many. Not only the dominant parties Barisan Nasional (BN) were shocked by the loss of significant numbers of seats but for the first time in the history of Malaysia politics, vis-${\grave{a}}$-vis, electoral affairs, they were denied a two-thirds majority in the Parliament. Notwithstanding the opposition parties such as Parti Islam Se-Malaysia (PAS), Democratic Action Party (DAP) and Parti Keadilan Rakyat (PKR: The People's Justice Party) that form the opposition coalition called Pakatan Rakyat (People's Alliance: PR), has come to a surprised with the GE-12 result, in which they not even think that were able to challenge hegemonic politics of BN, managed to capture and formed a government at the state level namely Kedah, Penang, Perak, and Selangor, except Kelantan which has been under the control of PAS since the 1990 general election. This article aims to analyze whether Sabah as a "fixed deposit"state is still relevant in understanding the continuity and survival of the BN political hegemony in the context of Malaysia political developments post-13th general election.

• Applied Chemistry for Engineering
• /
• v.33 no.4
• /
• pp.394-401
• /
• 2022

The synthesis of 1,2-alkylaminopropanediols (1,2-AAPs) was designed to improve the hydrophilicity of linear 1,2-alkanediols having 10, 12, 14, and 16 carbon atoms in the alkyl chain. 1,2-AAPs were synthesized by reacting 3-monochloro-1,2-propanediol (3-MCPD) with linear alkylamines having 10, 12, 14 or 16 carbon atoms in an ethanol solvent at 40℃ for 2 h. The yield and purity of four types of 1,2-AAPs synthesized were found to be in the range of 51-58% and 85-99%, respectively. The amine salts of four types of 1,2-AAPs were prepared from a purified paste or solid compound by adding an acidic solution (HCl) to pH 7, and then their solubilities and antibacterial effects were tested. 1,2-decylaminopropanediol, 1,2-dodecylaminopropanediol, and 1,2-tetradecylaminopropanediol were all dissolved in water at concentrations of 100%, 50%, and 0.1%, respectively, however 1,2-hexadecylaminopropanediol was not. The antibacterial effect was improved as the length of the alkyl chain increased. As a result of confirming the preservative effect of the lotion (cosmetic formulation) applied with 1,2-AAP for application, it showed very strong antibacterial activity at low concentrations ranging from 0.005% to 0.2%.