• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.3
• /
• pp.609-618
• /
• 2024

System reliability prediction in the development stage is increasingly crucial to reliability growth management to satisfy its target reliability, since modern system usually takes a form of complex composition and various complicated functions. In most cases of development stage, however, the information available for system reliability prediction is very limited, making it difficult to predict system reliability more precisely as in the production and operating stages. In this study, a system reliability prediction process is considered when the reliability-related information such as SIL (Safety Integrity Level) and MTTFd (Mean Time to Dangerous Failure) is available in the development stage. It is suggested that when the SIL or MTTFd of a system component is known and the field operational data of similar system is given, the reliability prediction could be performed using the scaling factor for the SIL or MTTFd value of the component based on the similar system's field operational data analysis. Predicting a system reliability is then adjusted with the conversion factor reflecting the temperature condition of the environment in which the system actually operates. Finally, the case of applying the proposed system reliability prediction process to a high performance mooring platform is dealt with.

• Journal of Chest Surgery
• /
• v.20 no.3
• /
• pp.603-609
• /
• 1987

The clinical, investigative, and surgical experiences were reviewed in four patients with congenitally corrected transposition of the great arteries who presented to the National Medical Center between August 1983 and August 1985. This condition is very rare congenital anomaly defined as the combination of atrioventricular discordance and transposition of the great arteries. Examples of primitive [single] ventricle inverted [that is, left sided in situs solitus] with outflow chamber were excluded in this paper. According to the sequential arrangement of the hearts there were two cases of [S,L,L] and two cases of [I,D,D]. The surgical approach should be focused on minimizing the risk of heart block and increasing the degree of relief of pulmonary outflow tract obstruction [POTO]. We experienced complete heart block in two cases of [S,L,L] and significant residual POTO in one case of [S,L,L] and one case of [I,D,D] postoperatively. There were one hospital mortality caused by complete heart block and residual POTO and two delayed mortalities caused by congestive heart failure and sepsis respectively.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.609-610
• /
• 2008

In this paper, a 110 dB, 1.024 MHz fourth-order single-loop Delta-Sigma sigma modulator has been presented with an over-sampling ratio of 128 and an overload factor of -6 dB for a bandwidth of 4 kHz. In particular, this ${\Sigma}-{\Delta}$ modulator is well suited for high accuracy measure systems. The whole modulator consumes only 3-mW from a single 3.3V supply in a $0.35-{\mu}m$ CMOS technology.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.8
• /
• pp.600-609
• /
• 1989

A thermally stimulated measurement using a temperature gradient has been applied to the study of charged particles and their polarity n polymers. From the experimental results on a cross-linked polyethylene (XLPE) film is found that the TSC peaks of the trapped carriers in C peak are due to the negative polarity which is electron and the ionic carriers having negative polarity show D peak.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.05a
• /
• pp.609-610
• /
• 2005

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.6
• /
• pp.609-615
• /
• 2015

This study was carried out for characterization of MIO synthesized in our laboratory by co-precipitation method and applied isotherm and kinetic models for adsorption properties. XRD analysis were conducted to find crystal structure of synthesized MIO. Further SEM and XPS analysis was performed before and after phosphate adsorption, and BET analysis for surface characterization. Phosphate stock solution was prepared by KH2PO4 for characterization of phosphate adsorption, and batch experiment was conducted using 50 ml conical tube. Langmuir and Freundlich models were applied based on adsorption equilibrium test of MIO by initial phosphate solution. Pseudo first order and pseudo second order models were applied for interpretation of kinetic model by temperature. Surface area and pore size of MIO were found $89.6m^2/g$ and 16 nm respectively. And, the determination coefficient ($R^2$) value of Langmuir model was 0.9779, which was comparatively higher than that of Freundlich isotherm model 0.9340.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.3
• /
• pp.609-614
• /
• 2008

A periodic mesoporous organosilica material was synthesized by microwave heating (PMO-M) using 1,2-bis(trimethoxysilyl)ethane as a precursor in a cationic surfactant solution, and textural properties were compared with those of the product produced by conventional convection heating (PMO-C). These synthesized materials were characterized using XRD, TEM/SEM, N2 adsorption isotherm, 29Si and 13C NMR, and TGA, which confirmed their good structural orders and clear arrangements of uniform 3D-channels. Synthesis time was reduced from 21 h in PMO-C to 2-4 h in PMO-M. PMO-M was made of spherical particles of 1.5-2.2 m m size, whereas PMO-C was made of decaoctahedron-shaped particles of ca. 8.0 m m size. Effect of synthesis temperature, time, and heating mode on the PMO particle morphology was examined. The particle size of PMO-M could be controlled by changing the heating rate by adjusting microwave power level. PMO-M demonstrated improved separation of selected organic compounds compared to PMO-C in a reversed phase HPLC experiment. Ti-grafted PMO-M also resulted in higher conversion in liquid phase cyclohexene epoxidation than by Ti-PMO-C.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.4
• /
• pp.609-616
• /
• 2002

The characteristics of mechanical behavior are investigated for Ti-6Al-4V alloy. Four kinds of the specimens are prepared under different heat treatments in order to produce different microstructures. In the present investigations, impact, tensile and fatigue crack growth tests are performed for each test specimen. The results obtained through the investigations are compared. Additionally fr actal dimensions of crack pass are obtained using the box counting method. The results are, 1) the microstructures shows as equiaxed, bimodal and Widmanstatten microstructures respectively, 2) the impact energy and elongation are superior fur the bimodal microstructure, and the hardness and tensile strength are superior fur the Widmanstatten microstructure, 3) the fatigue crack growth rate is similar to all microstructures in low ΔK region while that of equiaxed microstructure is the largest, and that of Widmanstatten microstructure is the lowest in high ΔK region respectively, 4) the fractal dimension D of Widmanstatten microstructure shows higher value than that of the equiaxed and bimodal microstructures under 200 magnification view of the SEM micrographs.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.8
• /
• pp.609-615
• /
• 2021

Three-dimensional numerical study was carried out to evaluate the aerodynamic characteristics of the supersonic grid fins installed on SpaceX Falcon 9. The present three-dimensional flow results were compared to the results by the concept of the unit grid fin previously introduced for more efficient and simpler flow calculations, and the validity of the approach of the unit grid fin were evaluated. The aerodynamic characteristics in supersonic flights Mach 2.8 of SpaceX Falcon 9 with various angle of attacks were also obtained.

• Archives of Pharmacal Research
• /
• v.21 no.5
• /
• pp.599-609
• /
• 1998

In search for new antitumor agents, twelve 6-aziridinylbenzimidazole derivatives were synthesized and their cytotoxicities were tested against three cancer cell lines (mouse lymphocytic leukemia P388 and B16, and human gastric carcinoma SNU-16). From 4-amino-3-nitrotoluene as the starting material, 2-(acetoxymethyl)benzimidazoles (5a-d) were obtained by Phillips reaction. These benzimidazoles were then reacted with Fremy's salt to give a mixture of three 2-(acetoxymethyl) (8a-c) and four 2-(hydroxymethyl)benzimidazole-4,7-diones (9a-d). Addition of these quinones with aziridine afforded 6-aziridinyl-2-(acetoxymethyl) (10a-c) and 6-aziridinyl-2-(hydroxymethyl)benzimidazole-4,7-diones (11a-d). Utilizing 2-(hydroxymethyl)benzimidazole-4,7-diones (9b,d), esters 10d and 13e-h were prepared by the sequential reactions of esterification and addition. The synthesized compounds show potent cytotoxicity against all of three cell lines tested. The cytotoxicities of 10a-d or 11a-d against SNU-16 were wuperior to those of 13e-h, and were equal to or slightly higher than that of mitomycin C. compounds 11a-d were slightly more cytotoxic than 10a-d in all cell lines tested.