• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.2
• /
• pp.9-16
• /
• 2012

In this paper, the beamforming and user scheduling scheme for device-to-device (D2D) underlaying celullar networks with partial channel state information is investigated. In the proposed scheme, cellular users whose channels are nearly orthogonal to the channel between base station and D2D receiver are selected for unitary beamforming so as to minimize the interference to the D2D receiver. The interference caused by underlaying D2D communication can be minimized by reducing the D2D transmitter's transmission power. To enhance the cellular users' throughput further, we also investigate codebook generation method in which each code vector belongs to multiple unitary code matrices. From simulation results, we show that the proposed beamforming and user scheduling scheme mitigates D2D interference to the cellular networks and the codebook generation method improves cellular users' throughput.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.12
• /
• pp.729-738
• /
• 2014

In this paper, we propose interference avoidance resource allocation scheme based on graph-coloring algorithm to introduce performance gain using spatial reuse in D2D (Device-to-Device) system. By assigning multiple D2D pairs to a single D2D resource, interference from neighboring D2D pairs is inevitable, which leads to performance degradation. Therefore, we first introduce the feedback information and the method considering the amount of information that can be practically provided by a D2D pair. Then, we propose how to construct a graph, which is corresponding to the D2D system, using the feedback information and adopt a graph-coloring algorithm to efficiently avoid interference. Simulation results show that the proposed resource allocation scheme outperforms traditional resource allocation schemes in both overall sum rate and spectral efficiency of D2D system while reducing the outage probability. Moreover, the outage probability, which indicates a failure rate of D2D communication, can be reduced by adopting the proposed scheme.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.01a
• /
• pp.87-88
• /
• 2019

본 논문에서는 D2D 송수신 단말쌍을 결정하는 방법을 쌍대적 관점에서 살펴보기로 한다. 주어진 D2D 송신단말 그룹과 수신단말 그룹에서 에너지 최적화를 위한 D2D 송수신 단말쌍 할당은 송신단말 그룹이 수신단말 그룹이 되고, 수신단말 그룹이 송신단말 그룹이 되는 환경에서도 동일한 송수신 단말쌍이 할당되는 쌍대적 특성이 있음을 증명하도록 한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.9
• /
• pp.895-902
• /
• 2014

This paper presents a 2-stage CMOS power amplifier for the 1.75 GHz band using a $0.18-{\mu}m$ CMOS process. Using ADS simulation, a power gain of 28 dB and an efficiency of 45 % at an 1dB compression point of 27 dBm were achieved. The implemented CMOS power amplifier delivered an output power of up to 24.8 dBm with a power-added efficiency of 41.3 % and a power gain of 22.9 dB. For a 16-QAM uplink LTE signal, the PA exhibited a power gain of 22.6 dB and an average output power of 23.1 dBm with a PAE of 35.1 % while meeting an ACLR(Adjacent Channel Leakage Ratio) level of -30 dBc.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.4
• /
• pp.721-727
• /
• 2016

In this paper, in order to resolve the problem of reduction for D2D (device to device) advertisement dissemination efficiency of conventional dissemination algorithms, we here propose several clustering algorithms (modified single linkage algorithm (MSL), K-means algorithm, and expectation maximization algorithm with Gaussian mixture model (EM)) based advertisement dissemination algorithms to improve advertisement dissemination efficiency in D2D communication networks. Target areas are clustered in several target groups by the proposed clustering algorithms. Then, D2D advertisements are consecutively distributed by using a routing algorithm based on the geographical distribution of the target areas and a relay selection algorithm based on the distance between D2D sender and D2D receiver. Via intensive MATLAB simulations, we analyze the performance excellency of the proposed algorithms with respect to maximum number of relay transmissions and D2D user density ratio in a target area and a non-target area.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.1
• /
• pp.55-61
• /
• 2011

In this paper, the outage probability of device-to-device (D2D) uplink communication underlaying cellular networks is analyzed over Rayleigh fading. We assume that a D2D pair and M cellular user equipments share the same frequency resources. To prevent any harmful interference from a D2D transmitter to the BS, the maximum transmit power of the D2D transmitter is strictly limited. Under these assumptions, the outage probability is represented as a function of the interference-to-signal ratio from M cellular user equipments to a D2D receiver and the number of cellular user equipments, M. In addition, the interference-to-signal ratio is represented as a function of distances among D2D equipments, cellular user equipments and the BS. Simulation results validate these analytical results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.3
• /
• pp.602-612
• /
• 2015

Current IEEE 802.11p which is suggested for vehicle to vehicle communication supports one hop communication. Thus, it has a limitation to carry out efficient data dissemination. In this thesis, we suggest LTE-D2D based vehicle network to provide efficient data dissemination in the vehicle environment. In this network architecture, we use name based message with IP packet options and we put the intermediate vehicle node called 'super vehicle node' and each normal vehicle node in the cell requests data to the super vehicle node. The super vehicle node responses data to the normal vehicle node. Performance analysis is based mathematical modeling. We compare LTE cellular network to LTE-D2D based vehicle network about throughput according to packet delivery time.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.1318-1321
• /
• 2012

교실 현대화 또는 교과교실 지원 사업에 의하여 현재 대부분의 학교는 2D 형 LCD 타입의 전자칠판을 설치하여 운용하고 있으며, 현재는 3D 전자칠판의 도입이 활성화되고 있는 시기이다. 본 연구는 상호응답형 3D 전자칠판에 대한 연구이다. 상호응답형 3D 전자칠판의 구성은 영상을 제어를 위한 AD보드, 3D 변환을 위한 3D변환 포맷터, 해상도 제어를 위한 FRC보드로 결합되며, 상호응답형 전자칠판을 구현하기위해 {x,y,z} 좌표 축출을 위한 전자팬 및 양안 카메라 기술을 적용했다. 또한 실시간 3D 판서 운용을 위한 3D 판서소프트웨어에 대한 구현 방법과 운용 구성에 대하여 연구했다.

• Journal of Digital Convergence
• /
• v.18 no.10
• /
• pp.225-232
• /
• 2020

The underlaying communication scheme in 5G cellular network is a very promising resource sharing scheme, and it is an effective scheme for improving service performance of 5G and reducing communication load between a cellular link and a device to device (D2D) link. This paper proposes the algorithm to minimize the resource interference that occurs when performing 5G-based multi-class service on gNB(gNodeB) and the cooperative priority-based resource allocation scheduling scheme (CPRAS) to maximize 5G communication service according to the analyzed control conditions of interference. The proposed CPRAS optimizes communication resources for each device, and it optimizes resource allocation according to the service request required for 5G communication and the current state of the network. In addition, the proposed scheme provides a function to guarantee giga-class service by minimizing resource interference between a cellular link and a D2D link in gNB. The simulation results show that the proposed scheme is better system performance than the Pure cellular and Force cellular schemes. In particular, the higher the priority and the higher the cooperative relationship between UE(User Equipment), the proposed scheme shows the more effective control of the resource interference.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.9
• /
• pp.783-789
• /
• 2015

This paper presents a Doherty power amplifier(DPA) operating in the 2.6 GHz band for long term evolution(LTE) systems. In order to achieve high efficiency, second and third harmonic impedances are controlled using a compact output matching network. The DPA was implemented using a gallium nitride high electron mobility transistor(GaN-HEMT) that has many advantages, such as high power density and high efficiency. The implemented DPA was measured using an LTE downlink signal with a 10 MHz bandwidth and 6.5 dB PAPR. The implemented DPA exhibited a gain of 13.1 dB, a power-added efficiency(PAE) of 57.6 %, and an ACLR of -25.7 dBc at an average output power of 33.4 dBm.