• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.5
• /
• pp.484-491
• /
• 2013

In this paper, the method of designing a wideband antenna has been introduced through the design technique that simultaneously employs L- and slot-type feeds. Using the two kinds of feeds and additional fence structure, a compact wideband patch antenna has been realized. The size of the patch has been reduced by about 30 % based on the low frequency(824 MHz) and the full fractional bandwidth is wider than 100 %. The L-feed element is for the EM coupling feeding at the low frequency, while it functions as a feeding line for the power coupling through the slot at the high frequency. The proposed antenna has been designed not only for wideband operations but also for a proper array element with a reduced size. Thus, the foundation for developing the ultra wideband patch array antennas has been prepared. The fabricated antenna has been found to have good characteristics on V.S.W.R and the radiation patterns over the full bands. The experimental and computed results are shown to be in good agreement.

• Korean Journal of Medicinal Crop Science
• /
• v.27 no.4
• /
• pp.247-258
• /
• 2019

Background: Astragali radix (A) and Lithospermi radix (L) have long been used as traditional medicines due to their known anti-inflammatory effects. This study aimed at evaluating, their optimal mixing ratio and their functional compounds by investigating the inhibitory effects of mixed extracts of A and L and their active compounds on matrix metalloproteinases (MMPs). Methods and Results: A and L extracts were obtained by extraction at $80^{\circ}C$ using 50% and 70% fermented alcohol, respectively, and then mixed at a ratio of 5 : 5, 6 : 4, 7 : 3 and 8 : 2 (w/w). The activities of MMP-1, MMP-3, and MMP-13 were evaluated in interleukin-1beta ($IL-1{\beta}$)-induced SW1353 cells. The extract mixtures showed synergistic inhibitory effects on MMP-3 and MMP-13, higher than the effects of the individual A and L extracts. The 7 : 3 mixture (ALM16) showed the most effective MMPs inhibitory activity, while among the active ingredients, calycosin-7-O-${\beta}$-D-glucoside and lithospermic acid exhibited excellent MMPs inhibitory activity. Additionally, an HPLC method was established for simultaneous quantification of the effective components of the extract mixtures, and validated by measuring the linearity, precision and accuracy of the limit of detection (LOD) and limit of quantification (LOQ). Conclusions: ALM16 showed the most effective MMPs inhibitory activity. Calycosin-O-${\beta}$-D-glucoside, calycosin and lithospermic acid were identified as useful candidates, as they were the major functional compounds in the MMP inhibitory activity. Summarily, ALM16 might be a highly effective in osteoarthritis management, owing to its because it exhibits a protective effect on cartilage via excellent inhibition of MMPs.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.3
• /
• pp.22-30
• /
• 2010

3D TV was been able to see in the market in early in this year. Tablet PC such as ipad by Apple and Galaxytab by Samsung were introduced recently. Those are possible by developing H/W and S/W of computer technology. The needs of interactive contents in many areas including education and entertainment area are increasing rapidly according to the various information devices are or will be in the market. Fore the more, GoogleTV and AppleTV are compete each other to dominate the world market in advance recently. CookTV tries to dominate in the domestic market by upgrading the current system. Diverse information devices are in the market means various size of displayers are able to be shown in our life. As TV is fused to computer, the displayer is substituted to TV's screen and the trend of TV is became bigger. The evolved TV is able to replace the computer by connecting to the network and people want to do interactions with contents by using the bidirectional communication. Therefore, it is expected to changing the human lifestyle. It is natural that contents for all members of family are needed, since TV's screen become bigger. It is required that the contents should guarantees the accessability of information to the all of family members and the easy interaction with contents. Our goal of experiment are to analyse the influence of interaction with contents as the size of images and to analyse a learning effect of contents quantitatively by applying a statistical method. Users interacted with contents without any difficulty when they met a same dimension and shape of objects as ame dimension and shape objects in their experiences or learning, was confirmed. And the learning effect were analysed and explained by applying the correlation.

• Journal of Biosystems Engineering
• /
• v.39 no.4
• /
• pp.253-260
• /
• 2014

Purpose: This study investigated the harvesting properties of the giant miscanthus (Miscanthus ${\times}$ giganteus) to measure the required mowing power for different stem conditioning methods in order to shorten the drying time after mowing and the bale density so that the crop can be used as biomass in the winter season. Methods: The required mowing power and bale density were measured using a power measurement device, three different mower-conditioners, and a mid-sized round baler under different working speeds and conditioning methods. Results: For the various mower-conditioners, the average stem length from mowing was 0.86-0.91 m, and the available working speed was 1.6 m/s. The steel roller-type mower-conditioner showed better stem conditioning but could not mow over a working speed of 1.6 m/s. The required average power of the mower-conditioners varied from 23.8 kW for the steel roller-type rotary disk mower-conditioner with a working width of 2.4 m to 37.2 kW for the flail-type rotary disk mower-conditioner with a working width of 3.2 m at a working speed of 1.6 m/s. The bale densities were $155.8-172.2kg/m^3$. The highest bale density was measured for stems with no conditioning and a moisture content of 11.3% (d.b.) mowed by the rotary disk mower. The bale density was affected by the mowing method because of the low moisture content of the miscanthus stems. Conclusions: In terms of the working performance and conditioning statue, the steel roller-type mower-conditioner is a better choice at a working width of 2.4 m, while the flail finger-type mower-conditioner is better at a working width of 3.2 m. The type of mower-conditioner used for giant miscanthus harvesting should be determined by considering the harvest area, workable period, and working performance of a mower-conditioner and baler during the winter.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.4
• /
• pp.494-498
• /
• 2008

MTT (3-(4, 5-dimethyl thiazol-2-yl)-2, 5-diphenyl tetrazolium bromide) reduction assay is a method that validates the viability of an active cell. Dehydrogenase in mitochondria converts yellow colored insoluble tetrazolium salt to purple colored water-soluble formazan. Sperm also have mitochondria in the midpiece, therefore sperm viability could be evaluated by MTT reduction assay. Several studies have already demonstrated the capability of application of the MTT reduction assay to sperm of several species in Hepes-BSA buffer. Because most liquid semen was diluted in extender like BTS (Beltsville Thawing Solution), Modena or Androhep when it is used or transferred, semen needed another dilution in Hepes-BSA buffer to assess sperm viability. In this study, we evaluated boar sperm viability especially in BTS extended semen and compared the efficiency of this test with eosin-nigrosin staining. We used the fresh BTS extended semen from a local A.I center. Semen sample was diluted to $3.0{\times}10^7$ sperms/ml in BTS. The rates of formazan production were measured in 96-well microtiter plates immediately and 1h after incubation at $17^{\circ}C$ using a spectrophotometer at wave length 560 nm. Simultaneously, split samples of the same semen were tested, using eosin-nigrosin staining to compare the efficiency of the MTT assay of sperm viability in BTS. The correlation between the results of these tests was calculated using Student-t test and ANOVA. The results revealed a strong correlation between the results of MTT reduction rate and the results that were simultaneously determined by eosin-nigrosin staining at 1 h. In conclusion, the MTT reduction test was an effective and simple method to validate sperm viability and it could be used as a simple tool to evaluate sperm viability in the local A.I center and laboratory.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.3
• /
• pp.28-40
• /
• 2002

Turbulent flows around two-dimensional wing sections in ground effect are analysed by incompressible RANS equations and a finite difference method. The Baldwin-Lomax algebraic turbulence model is used to simulate high Reynolds number flows. The main purpose of this study is to clarify the two-dimensional ground effect and its flow characteristics due to different ground boundary conditions, i.e., moving and fixed bottom boundary. As a first step, to validate the present numerical code, the computational result of Clark-Y(t/C 11.7%) is compared with published numerical results and experimental data. Then, NACA4412 section in ground effect is calculated for various ground clearances with two bottom boundary conditions. According to the computational results, the difference in the lift and moment simulated with the two bottom boundary conditions is negligible, but the drag force simulated by the fixed bottom is to some extent smaller than that by the moving bottom. Therefore, it can be concluded that the drag force measured in a wind tunnel with the fixed bottom could be smaller than that with the moving bottom.

• Resources Recycling
• /
• v.5 no.1
• /
• pp.21-28
• /
• 1996

Burmng method tn Bnidi-ied beds 101 the effectlvr reclamation of Sunn fi,uadry sand war u~ed lather tl~an rncchan1c;ll or p~~cumatiace thodq. which are co~nmonlyu scd in foundry factoricr in Kojcu In olrlcr to rcrnuvc hlc;~ns and ha~doersi ~nm foundry sand sndaces in the fluidized bcd, the lnnsl sffccuve lcmpemture mge was h00-70W. Sulbcr slab~l~liyn dca and comliresslvc streugtli oL rccla~mcd sand recyclcd by the burning luctllod wcre lalgcr dao those of rcclalmcd a n d by lllc pncumatlc mctllod. Tile energy cost IOIt he bummy mctliod was cstimalcd al SlZ0011'on oi llie iccl;~~rncds md. The coql l~ductlon in pul.chasing nzw s;od as well as the prevenllon or cnv~conmcnl.il contamlnallnn could hc hmefitcrl hy usl~lg Ihc rec1;~rnnl~oonf liisndry siod ~ecycledb y the method rleieloped in thls sludy

• Journal of Korean Port Research
• /
• v.11 no.2
• /
• pp.305-320
• /
• 1997

The objective of this paper is to analysis & forecast on the change in spatial structures of southeast region by development of the Seoul-Pusan high-speed Rail. To measure the spatial structures, it was used the method of mean center and standard distance among of centrographic measures as analytical tools. The changes of spatial structures patten over time and space in the southeast region were surveyed using population and employment data of 57 zones. And also, to forecast the spatial structures of the southeast region after opening of the Seoul-Pusan high-speed rail, it was supposed three(3) scenarios which designed using influential area with centering around of the proposed high-speed rail stations. Therefore, the results of this research indicate as follows; 1) The spatial structures of population is showed a trend of continual concentration toward Ulsan city area, and also the spatial structures of employment is showed a trend of continual dispersion over time. 2) The forecast of three93) scenarios supposed after opening of the Seoul-Pusan high-speed rail in 2006 show a change of the spatial structures with both population concentration and employment dispersion. In the meantime, the rapid increase of population and wide dispersion of employment is reform with centering around HSR stations which builted in the southeast region after opening of high-speed rail. 3) It shall furnish valuable data to establish the development strategy of urban and local region, and also forecast the change of spatial structures about population and employment in influential area which passed on high-speed rail line & stations by method of mean center and standard distance among of centrographic measures as analytical tools.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.4
• /
• pp.363-369
• /
• 1994

Bimuth telluride base thermoelectrics are prepared by AC current applied hot pressing method. It is possible to minimize the defects arising from the vaporization of Te, thanks to the very short processing time compared to the single crystal growing method. The optimum conditions for the AC applied hot pressing of 95 mol% $Bi_2Te_3-5 mol% Bi_2Se_3$ thermoelectrics are sintering at $400^{\circ}C$, for 2 minutes, under 1500 kgf/$\textrm{cm}^2$, with the particle size of $125 to 250 {\mu}m$, range of powder. The resultant Z value (figure of merit) was $2.2{\times}10^{-3}/K$.

• Journal of Animal Science and Technology
• /
• v.46 no.5
• /
• pp.719-728
• /
• 2004

The aims of this study were to estimate genetic parameters for carcass traits on Hanwoo(Korean Native Cattle) and to compare two different statistical algorithms for estimating genetic parameters. Data obtained from 1526 steers at Hanwoo Improvement Center and Hanwoo Improvement Complex Area from 1996 to 2001 were used for the analyses. The carcass traits considered in these studies were carcass weight, dressing percent, eye muscle area, backfat thickness, and marbling score. Estimated genetic parameters using EM-REML algorithm were compared to those by Bayesian inference via Gibbs Sampling to find out statistical properties. The estimated heritabilities of carcass traits by REML method were 0.28, 0.25, 0.35, 0.39 and 0.51, respectively and those by Gibbs Sampling method were 0.29, 0.25, 0.40, 0.42 and 0.54, respectively. This estimates were not significantly different, even though the estimated heritabilities by Gibbs Sampling method were higher than ones by REML method. Since the estimated statistics by REML method and Gibbs Sampling method were not significantly different in this study, it is inferred that both mothods could be efficiently applied for the analysis of carcass traits of cattle. However, further studies are demanded to define an optimal statistical method for handling large scale performance data.