• Clean Technology
• /
• v.11 no.3
• /
• pp.117-122
• /
• 2005

N-vinyl caprolactam (NVCL), a kind of N-vinyl amide monomer, must be dissolved in continuous phase ($scCO_2$) for dispersion polymerization in supercritical carbon dioxide. Phase behavior of $CO_2$+NVCL is very important and necessary for determining initial polymerization condition and for monomer extraction from final polymer. There is the limitation of experimental method for obtaining pure properties of the monomer because of the possibility of polymerization. And N-methyl caprolactam (NMCL) is the useful solvent for the gas treating process. In the viewpoint of molecular thermodynamics, NVCL and NMCL have same functional group i.e. ${\varepsilon}$-caprolactam. In the case of NVCL, hydrogen of amide group is substituted with vinyl group and for NMCL, hydrogen of amide group is substituted with methyl group. We suggested modified group contribution method for this ${\varepsilon}$-caprolactam derivatives. This new group contribution parameter was applied to correlate $CO_2$ + N-vinyl caprolactam or N-methyl caprolactam system.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2010.06a
• /
• pp.79-79
• /
• 2010

Semimetallic bismuth (Bi) has been extensively investigated over the last decade since it exhibits very intriguing transport properties due to their highly anisotropic Fermi surface, low carrier concentration, long carrier mean free path l, and small effective carrier mass $m^*$. In particular, the great interest in Bi nanowires lies in the development of nanowire fabrication methods and the opportunity for exploring novel low-dimensional phenomena as well as practical application such as thermoelectricity[1]. In this work, we introduce a self-assembled interconnection of nanostructures produced by an on-film formation of nanowires (OFF-ON) method in order to form a highly ohmic Bi nanobridge. A Bi thin film was first deposited on a thermally oxidized Si (100) substrate at a rate of $40\;{\AA}/s$ by radio frequency (RF) sputtering at 300 K. The sputter system was kept in an ultra high vacuum (UHV) of $10^{-6}$ Torr before deposition, and sputtering was performed under an Ar gas pressure of 2m Torr for 180s. For the lateral growth of Bi nanowires, we sputtered a thin Cr (or $SiO_2$) layer on top of the Bi film. The Bi thin films were subsequently put into a custom-made vacuum furnace for thermal annealing to grow Bi nanowires by the OFF-ON method. After thermal annealing, the Bi nanowires cannot be pushed out from the topside of the Bi films due to the Cr (or $SiO_2$) layer. Instead, Bi nanowires grow laterally as a mean s of releasing the compressive stress. We fabricated a self-assembled Bi nanobridge (d=192 nm) device in-situ using OFF-ON through annealing at $250^{\circ}C$ for 10hours. From I-V measurements taken on the Bi nanobridge device, contacts to the nanobridge were found highly ohmic. The quality of the Bi nanobridge was also proved by the high MR of 123% obtained from transverse MR measurements. These results manifest the possibility of self-assembled nanowire interconnection between various nanostructures for a variety of applications and provide a simple device fabrication method to investigate transport properties on nanowires without complex patterning and etching processes.

• Korean journal of applied entomology
• /
• v.55 no.1
• /
• pp.45-51
• /
• 2016

Thirty-seven species of insect pests were surveyed on different area blueberry farms in Jeonbuk province during 2013~2014. Six principal insect pests were found, including Dasineura oxycoccana Johnson, Aphis gossypii Glover, Scirtothrips dorsalis Hood, Ricania sp., Hyphantria cunea Drury, and Latoia consocia Walker. A. gossypii infestation was severe at Iksan and Jinan in middle May. S. dorsalis infestation was severe at all surveyed area in early June, which is the flowering season, and the degree of damage caused was higher in young plants. Ricania sp. was abundant in Jinan and Sunchang, and then appeared to spread across all areas in Jeonbuk. H. cunea had a tendency to concentrate in Iksan during June. Five species of Limacodidae was found, including L. consocia, which was dominant in all areas surveyed, with densities higher then those of the others four species. The degree of damage due to D. oxycoccana was higher in the plain areas (Iksan) than in the middle-mountain areas (Jinan, Sunchang). The rate of damage was 60~78% higher in young plant stages (i.e., those under 3 years of tree age) than in those over 5 years old (30~50%). Moreover, the rate of damage observed in greenhouses was 50~80% higher than that observed in the field (30~40%).

• Archives of Pharmacal Research
• /
• v.24 no.1
• /
• pp.64-68
• /
• 2001

Endothelin-1 (ET-1 ), a novel and potent vasoconstrictor in blood vessel, is known to have some functions in the rat central nervous system (CNS), In order to investigate the central functions of ET-1 , ET-1 was administered to the periaqueductal gray area (PAC) of anesthetized rats to induce barrel rolling and increase the arterial blood pressure (ABP). ET-1 had a modulatory effect on central cardiovascular and behavioral control. The selective N-methyl-D-aspartate (NMDA) receptor antagonist MK-801 (3${u}m/ol/kg$, i.p.) blocked the ET-1 induced responses, and both the nitric oxide synthase (NOS) inhibitor L-NAME (N-nitro-L-arginine mIThyl-ester 1 nmol/rat) and the nitric oxide (NO) scavenger hemoglobin (15 nmol/rat) had similar effects in redtAcing the IT-1 (10 pmol/rat)-induced behavioral changes and ABP elevation. However, NO donor sodium nitroprusside (SNP 10${u}g$, 1${u}g/rat$) decreased the ET-1 induced ABP elevation, and recovered the ET-1 -induced barrel rolling effect that was reduced by MK-801. These results suggest that ET-1 might have neuromodulatory functions such as ABP elevation and barrel rolling induction in the PAG of the rats via the NMDA receptor and NO.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.4
• /
• pp.279-285
• /
• 2010

In the process of the probabilistic-based design on the coastal structures, the probability density function (pdf) of tidal elevation data is assumed as the normal distribution function. The pdf shape of tidal elevation data, however, is better-fitted to the double-peak normal distribution function and the equivalent mean and standard deviation (SD) estimation process based on the equivalent normal distribution is required. The equivalent mean and SD (equivalent parameters) are different with the mean and SD (normal parameters) estimated in the condition that the pdf of tidal elevation is normal distribution. In this study, the difference, i.e., estimation error, between equivalent parameters and normal parameters is compared and analysed. The difference is increased as the tidal elevation and its range are increased. The mean and SD differences in the condition of the tidal elevation is ${\pm}400cm$ are above 100 cm and about 80~100 cm, respectively, in Incheon station. Whereas, the mean and SD differences in the condition of the tidal elevation is ${\pm}60cm$ are very small values in the range of 2~4 cm, in Pohang station.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.181-186
• /
• 2005

This experiment was conducted to know the appropriate methods for extraction and determination of rutin contained buckwheat plants. The efficient HPLC analytical condition of rutin contained buckwheat plants was developed. The gradient elution employed a $250mm\times4.6mm$ i.d. Tosoh ODS 120T column. The gradient system was used two mobile phases. A gradient elution was performed with mobile phase A, consisting of $2\%$ Acetic $acid-45\%$ Acetonitrile, and mobile phase B, comprising $2\%$ aqueous acetic acid, and delivered at a flow rate of 1mL/min as follows: 0-18 min, $50-100\%$ A; 18-20 min, $100-50\%$ A; 20-22 min, $50\%$ A. The UV detection wavelength was set at 355 nm. The limit of detection (LOD) for rutin standard compound was 20 ng/mL. And, the higher content of rutin in the extracts was obtained by $80^{\circ}C$ reflex extraction for 120 min. from plants of buckwheat using ethanol.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.6
• /
• pp.518-524
• /
• 1990

Actual evapotranspiration was measured over rice paddy field by Bowen ratio heat balance method and based on this, investigated was the reliability of actual evapotranpiration estimation from Class-A Pan and small pan evaporation and reference evapotranspiration calculated by modified Penman-Monteith model. Crop coefficients based on Class-A Pan and small pan evaporation and reference evapotranspiration by modified Penman-Monteith model were averaged to be 1.57. 1.10 and 1.49 over the whole rice growing season, respectively. Their respective coefficients of variation were 28.7. 22.7 and 12.8 percent, respectively. Crop coefficient based on modified Penman-Monteith model varied in good agreement with the trend of leaf area development, being greatest around heading stage.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.315-315
• /
• 2017

In Japan, more than 80 % of soybean growing area is converted fields and excess water is one of the major problems in soybean production. For example, recent study (Yoshifuji et al., 2016) suggested that in the fields of shallow groundwater level (GWL) (< 1m depth), rising GWL even in a short period (e.g. 1 day) causes inhibition of soybean growth. Thus it becomes more and more important to predict GWL and soil moisture in detail. In addition to conventional surface drainage and underdrain, FOEAS (Farm Oriented Enhancing Aquatic System), which is expected to control GWL in fields adequately, has been developed recently. In this study we attempted to predict GWL and soil moisture condition at the converted field with FOEAS in Biwa lake reclamation area, Shiga prefecture, near the center of the main island of Japan. Two dimensional HYDRUS model (Simuinek et al., 1999) based on common Richards' equation, was used for the calculation of soil water movement. The calculation domain was considered to be 10 and 5 meter in horizontal and vertical direction, respectively, with two layers, i.e. 20cm-thick of plowed layer and underlying subsoil layer. The center of main underdrain (10 cm in diameter) was assumed to be 5 meter from the both ends of the domain and 10-60cm depth from the surface in accordance with the field experiment. The hydraulic parameters of the soil was estimated with the digital soil map in "Soil information web viewer" and Agricultural soil-profile physical properties database, Japan (SolphyJ) (Kato and Nishimura, 2016). Hourly rainfall depth and daily potential evapo-transpiration rate data were given as the upper boundary condition (B.C.). For the bottom B.C., constant upward flux, which meant the inflow flux to the field from outside, was given. Seepage face condition was employed for the surrounding of the underdrain. Initial condition was employed as GWL=60cm. Then we compared the simulated and observed results of volumetric water content at depth of 15cm and GWL. While the model described the variation of GWL well, it tended to overestimate the soil moisture through the growing period. Judging from the field condition, and observed data of soil moisture and GWL, consideration of soil structure (e.g. cracks and clods) in determination of soil hydraulic parameters at the plowed layer may improve the simulation results of soil moisture.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.35-35
• /
• 2017

How do plants take up water from soils especially when water is scarce in soils? Plants have a strategy to respond to water deficit to manage water necessary for their survival and growth. Plants regulate water transport inside them. Water flows inside the plant via (i) apoplastic pathway including xylem vessel and cell wall and (ii) cell-to-cell pathway including water channels sitting in cell membrane (aquaporins). Water transport across the root and leaf is explained by a composite transport model including those pathways. Modification of the components in those pathways to change their hydraulic conductivity can regulate water uptake and management. Apoplastic barrier is modified by producing Casparian band and suberin lamellae. These structures contain suberin known to be hydrophobic. Barley roots with more suberin content from the apoplast showed lower root hydraulic conductivity. Root hydraulic conductivity was measured by a root pressure probe. Plant root builds apoplastic barrier to prevent water loss into dry soil. Water transport in plant is also regulated in the cell-to-cell pathway via aquaporin, which has received a great attention after its discovery in early 1990s. Aquaporins in plants are known to open or close to regulate water transport in response to biotic and/or abiotic stresses including water deficit. Aquaporins in a corn leaf were opened by illumination in the beginning, however, closed in response to the following leaf water potential decrease. The evidence was provided by cell hydraulic conductivity measurement using a cell pressure probe. Changing the hydraulic conductivity of plant organ such as root and leaf has an impact not only on the speed of water transport across the plant but also on the water potential inside the plant, which means plant water uptake pattern from soil could be differentiated. This was demonstrated by a computer simulation with 3-D root structure having root hydraulic conductivity information and soil. The model study indicated that the root hydraulic conductivity plays an important role to determine the water uptake from soil with suboptimal water, although soil hydraulic conductivity also interplayed.

• Journal of Dairy Science and Biotechnology
• /
• v.31 no.1
• /
• pp.35-49
• /
• 2013

The purpose of this study was to develop Mozzarella cheese analogues by using dairy products in the form of WPC 34, WPC 80, whey protein, demineralized whey powder, and lactose powder along with soy milk. Soy milk was separately blended with 5% WPC 34 (A), WPC 80 (B), DWP (C), WP (D), and LP (E) and also with 10% WPC 34 (F), WPC 80 (G), DWP (H), WP (I), and LP (J). Blending of soy milk and whey products showed that increase in the proportions of whey products (WPC 34, WPC 80, DWP, WP, and LP) led to increase in the protein, lactose, and SNF levels of the admixture. A decrease in fat content was observed for all cheeses prepared from mixtures, relative to those for the control cheese. The nitrogen content within analogue samples was higher than that in the control cheese and increased with increase in the proportions of whey products within soy milk. Higher water soluble nitrogen levels were observed in cheese prepared from whey-product-blended soy milk than in the control cheese. The non-protein nitrogen level within the control Mozzarella cheese was significantly lower than that in the Mozzarella analogues, and, in the case of cheese analogues, it increased with increase in the proportion of whey products in soy milk. With regard to the physicochemical and sensory qualities of the Mozzarella cheese analogues and control cheese, the pH of all analogue samples, with the exception of the cheese prepared from group G, was lower than that of the control Mozzarella cheese. Rheological studies showed that the hardness of Mozzarella cheese analogues was lower than that of the control Mozzarella, while the elasticity, cohesiveness, and brittleness of the analogues was higher. The control sample had a higher meltability level than any of the Mozzarella analogues. Mozzarella cheese prepared with the traditional method had higher browning and stretching levels than all the cheese analogues, but a lower oiling-off level.