• Conservation Science in Museum
• /
• v.29
• /
• pp.99-110
• /
• 2023

The stone fragments that are missing from the stone cultural heritage have limited use beyond being directly fitted to identify their original position, as they are relatively heavy and bulky, and there is the further risk of secondary physical damage during manual work. Therefore, in this study, morphological relationships between the missing parts and the stone fragments were identified through digital restoration, and a three-dimensional (3D) printed replica was created for use at the exhibition for Stone Buddhas in Four Directions in Hwajeon-ri, Yesan, where 72 stone fragments had been excavated together. First, for the digital restoration, stone fragments of similar shapes were selected after the coordinates of the 3D scanning model were aligned in virtual space. In addition, the stone fragments were printed using a 3D printer to check whether they were physically related to the missing parts. Thus, the original positions of a total of nine stone fragments were identified. To utilize these research results in the exhibition, a 1:1 replica of the Stone Buddhas in Four Directions was produced using 3D printing technology, and the nine stone fragments were also restored to their original positions. The digital technology used in this study is of great importance in that it not only made up for the limitations of the direct manual method but also suggested the possibility of expanding its application to the fields of documentation, restoration, and replication of similar cultural heritage.

• Fashion & Textile Research Journal
• /
• v.22 no.1
• /
• pp.11-24
• /
• 2020

This research examines pattern production of 3 men's costumes in the second half of 19th century by 3D reconstruction to reveal technical aspects of mail costumes. The steps are as follows. First, an examination of selective type according to research study. Second, a pattern analysis of 3 historical male tops of 19th century referred to 9 pattern books of the France National Library collection. Third, a categorized type analysis that referred to paintings of the Musée d'Orsay collection. Fourth, a measurement and structure research of 3 historical garments of Fashion and Textile Museum collection. Fifth, the pattern making and fitting by 3D simulation. Research discussed the following subjects and results. First, main type of men's coat can be categorized by frac, redingote, jaquette, and veston. Second, the male costume pattern contained in pattern books was researched along with distinguished silhouettes and structures; X silhouette for frac and redingote, H silhouette for jaquette, and straight box silhouette for veston. Third, based on the analysis of representative type of men's costume per period conducted previous studies, 2 redingotes and a jaquette in the museum were selected and compared to other data such as image materials. Last, the following process was conducted for reconstruction; 'Drawing diagram-Primary pattern drafting by measurement value-3D virtual fitting-Checking the fit-Modification and complement'. We also obtained a 3D virtual reconstruction and a 2D research pattern that suggested a costume pattern by each type along with 3D reconstruction that included insights for male coat techniques of 19th century France.

• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1519-1522
• /
• 2003

본 논문에서는 지리정보서비스 개념을 사이버 박물관 정보 서비스와 접목하여 구현하였다. 입체적인 지리정보를 활용하기 위해서 유물과, 유적에 대한 정보를 3D모델링 하였으며, 3D모델의 랜더링 최적화를 위해서 LOD(level of detial)를 적용하여 범용 PC의 유저(user) 누구나 쉽게 이용할 수 있다. 또한 사용자로 하여금 실시간 인터렉티브 기능을 부여하여 네비게이션(navigation)을 쉽게 구현하였다. 일반적으로 종래의 사이버 정보서비스의 멀티미디어매체가 수동적이고, 실감적인 효과가 떨어지는 단점을 보완하는 실시간 3차원 인터렉티브 컨텐츠를 제작 방법을 구현하였다.

• Conservation Science in Museum
• /
• v.11
• /
• pp.61-72
• /
• 2010

This is the analysis of material dyed with Korean yellow dyes such as tumeric, amur cork tree, goldthread, gardenia, and the flowers of sophora japonica using nondestructive ultraviolet-visible and fluorescence spectrophotometry. In order to find out whether type of fabric or mordant influences analysis results, test fabrics were made using two types of fabric(silk and cotton) and dyed using three different mordants(no mordant, alum, iron). After analysis with UV-Vis reflectance spectrum on the dyed fabric, when the fabric was dyed with tumeric, amur cork tree and goldthread, the results were similar with no mordant and alum mordant, whereas there was a difference with an iron mordant. Also when the fabric was dyed using gardenia, different fabrics brought different results but there was no difference in results with mordants. On the other hand, when the fabric was dyed using the flowers of sophora japonica, there was no difference with fabrics but with mordants. After analysis with 3D-fluorescence spectrum, fabrics dyed with tumeric, amur cork tree and goldthread showed their own fluorescent spectrum with no regard to fabric and mordant; but with gardenia, there were differences with different fabrics whereas with the flowers of sophora japonica, there were differences with mordants.

• Conservation Science in Museum
• /
• v.25
• /
• pp.1-8
• /
• 2021

This study investigated White Porcelain Water Dropper with Openwork Lotus Scroll Design and Eight Trigram Design in Cobalt-blue Underglaze (hereinafter, the "water dropper") in the collection of the National Museum of Korea using computed tomography (CT). A replica was produced to examine both the structure and its original production method. The CT scanning identified no joint lines or pores in the clay, which suggests that the body (the lower part of the water dropper) was shaped in a single piece using a mold and was then matched with a mold-formed lid (the upper part of the water dropper). The inner container of the body portion was roughly trimmed with a bamboo knife so that its upper surface could be securely attached to the bottom of the lid and prevent any leakage in the joined surface. It appears that the inner container for storing water was made first in a cylindrical shape that met the unit of quantity used at the time and could be easily formed by molding. It was transformed into a trapezoid shape during the process of combining it with the lid. A cylindrical inner container was reproduced using silicon 3D printing to compare its capacity with that of the original inner container. The comparison revealed that the reproduced container had a capacity of 152.5㎖, whereas the original container holds approximately 168.6㎖, a figure similar to three hop (around 174㎖) in Joseon-period units of quantity. Since the capacity of the cylindrical inner container corresponds to a known measure from the late Joseon dynasty, it is likely that the water dropper was originally produced to contain a cylindrical inner container.

• Journal of the Korean earth science society
• /
• v.30 no.5
• /
• pp.581-587
• /
• 2009

This study intended to the optimal conservation method and to make an application scheme for the fossil locality of the Quaternary Hamori Formation at the northeastern coast of Mt. Songak. Many kinds of innumerable fossils are found from the Hamori Formation in the study area: Footprints of hominid, trace fossils of invertebrates, bird, artiodactyla, proboscidea, carnivores, unclassified footprints, and body fossils (arthropoda, gastropoda, mollusca, and plants). The formation has been outcropped and eroded out with innumerous fossils by the strong wave action of storm and typhoon. Korean government recognized the dangerous situation of the important fossils and decided to conserve the formation for the national heritage. Method D1 (conservation hall or museum on the fossil locality) may be the best way to protect the fossil locality from all the natural activities and to do the research, exhibition, education, and sightseeing together. The application of the geologic materials from the fossil locality should preferentially focus on the collection and research which should be accompanied by exhibition, education, and sightseeing. The application scheme may be stepped into three stages during 10 years: (1) systematic conservation and publicity during 2005-2007, (2) establishment of wellorganized museum during 2008-2010, and (3) international museum with the optimized roles 2011-2014.

• Journal of the Korea Furniture Society
• /
• v.23 no.1
• /
• pp.84-94
• /
• 2012

We present the species and the dendrochronological dates of Korean traditional furniture in Forest Museum Collection of Korea National Arboretum. Seven of thirteen were successfully dated. Chest with a flap door (84-55-1) was dated A. D. 1623. Others dated were cabinet (83-41-1: A. D. 1759), Chest with a turnover door (83-39-1; A. D. 1801), Cabinet with two horizontal section (88-39; A. D. 1843), Rice chest (82-27-3; A. D. 1849), Cabinet with two horizontal section (83-40-2; A. D. 1877), Chest with a flap door (84-50; A. D. 1918). Most of existing cabinets were made in 1800s. The 84-55-1 chest was one of the earliest pieces of furniture in the collections of Korea museums. The furniture is usually composed one species. The major species was Pinus densiflora. Bedside cabinet (83-41-1) and Cabinet with two horizontal section (88-39) were made from Korean pine (Pinus koraiensis). Becasue they were dated by the tree-ring chronology of Mt. Bekdu, the timber of their boards could be from the area of Mt. Bekdu.

• Journal of Species Research
• /
• v.9 no.4
• /
• pp.492-531
• /
• 2020

This study is based on crane fly specimens collected from 1936-2019 and are in collections maintained at the United States National Museum, Smithsonian Institution, Washington DC, USA; the Snow Entomological Museum, University of Kansas, Lawrence, KS, USA; the Hungarian Natural History Museum in Budapest, Hungary, and the National Institute of Biological Resources, Incheon, South Korea. The genus Dicranophragma Osten Sacken, 1860 with two species D. (Brachylimnophila) transitorium (Alexander, 1941) and D. (Dicranophragma) melaleucum melaleucum (Alexander, 1933), is a new record for the Korean Peninsula. New findings of Dicranomyia (Erostrata) submelas Kato et al., 2018, Dicranoptycha venosa Alexander, 1924a, Austrolimnophila (Archilimnophila) subunicoides(Alexander, 1950b), A. (A.) unica (Osten Sacken, 1869), A. (Austrolimnophila) asiatica (Alexander, 1925), Conosia irrorata (Wiedemann, 1828), Eloeophila persalsa (Alexander, 1940), E. serenensis (Alexander, 1940), E. subaprilina (Alexander, 1919), E. ussuriana ussuriana (Alexander, 1933), E. yezoensis (Alexander, 1924b), Paradelphomyia chosenica Alexander, 1950b, and P. macracantha Alexander, 1957 are discussed. General information on genera and subgenera morphological characters, redescriptions of species based on Korean specimens, illustrations of both sexes, elevation range, period of activity, habitat information, general distribution, and a distribution map for the Korean Peninsula (including North Korea) are presented for each species.

• Journal of Conservation Science
• /
• v.7 no.1
• /
• pp.23-30
• /
• 1998

The examination of scientific analysis could give many information on the object of ancient glass. It would be allowed to understand the cultural situation and a course of inflow that the data of glass composition was classified by raw materials, technique of making, period and regional groups. Quantitative analysis conditions for SEM-EDS were set for glass and glaze on the pottery and 62 samples of glass beads excavated from Yangdong-ri remains at Kimhae were analyzed and classified. It was found that the glass beads were made of all alkali-glass. In addition, it was postulated that the potash glass was appeared from the 1st century A.D. and soda glass was appeared from the late second or early 3rd century A.D. in this region. The colors of glass were closely related to the concentration of metallic elements such as copper, iron and manganese. It was confirmed that the composition of glass beads could be classified and characterized by raw materials, color, period and regional groups.

• Journal of Korea Multimedia Society
• /
• v.13 no.4
• /
• pp.601-608
• /
• 2010

This investigation proposes a new method to overcome disadvantages of panorama VR that is oriented toward spacial information and Object VR that is oriented toward object itself and consequently to make 3D virtual reality (VR) contents efficiently by using image based approach. 3D VR contents provide satisfactory qualities to users but 3D modeling is complex and elaborative and requires high cost. So, this paper aims at reducing tremendous efforts for making 3D VR by substituting 3D modeling with 'advanced Billboard'(we call it Smart Billboard). Smart Billboard has a mechanism for selecting an adequate mapping image that is observable at each user viewpoint and carry on texture mapping into the Billboard. And it is validated with the practical embodiments of a virtual museum in which the exhibitions are prepared by Smart Billboard.