• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.123-129
• /
• 2023

MIMO antenna is a field in which various researches have been actively conducted for a long time, and its design concept is universally well known. However, Unlike conventional MIMO antennas, MIMO antennas for autonomous driving radars, which have recently been attracting attention, are designed in W-band which is a millimeter wave band, and must also meet novel design conditions to satisfy the performance of autonomous driving radars. Therefore, a novel and different approach is required for the design and beam pattern verification of the MIMO antenna for autonomous driving radar. In this paper, a MIMO antenna is designed and the design process to satisfy the conditions of a W-band autonomous driving radar is introduced, and proposes a beam pattern verification method for a W-band MIMO antenna mounted on an autonomous driving radar system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.5
• /
• pp.95-103
• /
• 2009

An efficient symbol time synchronization scheme for IEEE 802.11n MIMO-OFDM based WLAN systems using cyclic shift diversity (CSD) preamble is proposed. CSD is used to prevent unintentional beamforming when the same preamble signal is transmitted through transmit antennas. However, it is difficult to find a proper starting-point of the OFDM symbol with the conventional algorithms because of time offset by multi-peaks which are result from cross-correlation of received CSD preamble with a known short training symbol. In addition, the performance of symbol time sync. is affected by AGC and packet detection position. In this paper, an optimal symbol time synch. algorithm which is composed of the boundary detection scheme between LTS and OFDM symbols, the verification scheme for enhancement of boundary detection accuracy, and the SNR-varying threshold estimation scheme is proposed. Simulation result show that the proposed algorithm has performance gains of 4.3dB in SNR compared to the conventional algorithms at the rate of 1% sync. failure probability for $2{\times}2$ MIMO-OFDM system and 18dB at 0.1% when maximum frequency offset exists. It also can be applied to $4{\times}4$ MIMO-OFDM system without any modification. Hence, it is very suitable for MIMO-OFDM WLAN systems using CSD preamble.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6478-6483
• /
• 2013

This paper presents the idea of interpolating between multiple sounding bursts to estimate the individual channels of a MIMO scenario. The performance of the proposed technique depends on the $f_dT$ product and the number of transmit and receive antennas. In particular, this technique can be effective if the $f_dT$ product is not too high and the number of antennas is not too large. Furthermore, there is a considerable difference in the performance of the 16 channels in the $4{\times}4$ MIMO case because the sounding bursts spread farther apart with time, meaning that the Doppler in the channel causes a greater error for the channels.

• Journal of Broadcast Engineering
• /
• v.16 no.3
• /
• pp.483-489
• /
• 2011

In this paper, we propose a new antenna, which has wide bandwidth, good radiation patterns, and high-gain characteristics. We analysis the antenna using FDTD(Finite Difference Time Domain) method. And the antenna parameters are optimized to get maximum bandwidth. From the measured results, the bandwidth of the antenna is 0.839 octave, for the S11${\leq}$-10 dB. And the measured cross polarization level of the proposed antenna is less than -25 dB at the center frequency. Experimental data of the return loss and the radiation pattern of the proposed antenna are also presented, and the experimental bandwidth characteristics are relatively in good agreement with the FDTD results. The proposed antenna can be applied to MIMO, LAN, biomedical instruments, broadcasting-network system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.12
• /
• pp.1661-1666
• /
• 2014

In this paper, a compact planar ultra wideband (UWB, 3.1~10.6GHz) multiple-input multiple-output (MIMO) antenna is proposed. This antenna consists of two monopole planar UWB antennas and T-shaped stub decoupling between two antennas. The T-shaped stub improve the isolation characteristic at the wide band. The evolution strategy(ES) algorithm is employed to optimized design. As a result, optimized antenna has a return loss less than -10dB and the isolation less than -15dB from 3.1GHz to 10.6GHz. During the optimization process, the antenna gain is enhanced at lower band and the envelope correlation coefficient(ECC) is lower than 0.003.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6C
• /
• pp.547-553
• /
• 2010

In this paper, novel approximated closed-form expressions of the SER(Symbol Error Rate) and BER(Bit Error Rate) are presented for the multi-input multi-output space-time block coding(MIMO-STBC) system employing two transmit and N receive antenna(s) in Rayleigh fading channels. Assuming a zero-forcing equalizer and a single-symbol maximum-likelihood (ML) decoder, the formulas are derived for the SER and BER, and then their approximated counterparts are also derived. In the derivation of the approximated expressions, acurve-fitting model is adopted that can eliminate the integral operators in the exact expressions.

• Journal of electromagnetic engineering and science
• /
• v.10 no.4
• /
• pp.303-308
• /
• 2010

This paper proposes a method for improving the isolation characteristic of multi-input multi-output (MIMO) antennas using a split ring resonator (SRR) array structure between the two radiating elements. The fabricated antenna satisfies the 10 dB return loss requirement in the Mobile-WiMAX frequency band from 3.4 GHz to 3.6 GHz. The isolation between the two radiating elements is improved by approximately 20 dB at the center frequency by inserting a SRR array structure. The measured peak gains of the two elements are 2.3 dBi and 2.4 dBi, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.5
• /
• pp.504-511
• /
• 2016

In this paper, MIMO system based on turbo equalization techniques which LDPC codes were outer code and space time trellis codes (STTC) were employed as an inner code are studied. LDPC decoder and STTC decoder are connected through the interleaving and de-interleaving that updates each other's information repeatedly. In conventional turbo equalization of MIMO system, BCJR decoder which decodes STTC coded bits required two-bit wise decoding processing. Therefore duo-binary turbo codes are optimal for MIMO system combined with STTC codes. However a LDPC decoder requires bit unit processing, because LDPC codes can't be applied to these system. Therefore this paper proposed turbo equalization for MIMO system based on LDPC codes combined with STTC codes. By the simulation results, we confirmed performance of proposed turbo equalization model was improved about 0.6dB than that of conventional LDPC codes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6C
• /
• pp.539-546
• /
• 2010

In next generation wireless communication systems based on OFDM, multiple-input multiple-output (MIMO) technique is adopted in order to achieve high data throughput with limited bandwidth. As one of MIMO techniques, spatial multiplexing scheme needs high performance data detection algorithm that can be performed with low computational complexity. In this paper, we propose an algorithm that can compute QRM-MLD with reduced complexity. Also, hybrid detection technique is proposed, which can reduce the complexity by selecting between MMSE and QRM-MLD according to the channel condition. The proposed algorithm provides the trade-off between performance and complexity. The computer simulations for downlink transmission in 3GPP LTE system show that less than 0.1dB performance degradation can be achieved at 0.1% BER with 59% reduction on computational complexity compared with the conventional QRM-MLD algorithm.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.4
• /
• pp.121-127
• /
• 2012

In this paper, we propose a new beamforming method which is used in Multiple User-Multiple Input Multiple Output (MU-MIMO) system. An experimental system consists of LTE based TDD base-station which has 2 MIMO elements each of which contains 10-array antennas and 2 mobile terminals each of which has a single antenna. We demonstrate that the Multiple Access Interference can further be reduced by appending a beamforming procedure in MU-MIMO system in which various users share a given channel resource. The proposed algorithm is the ordinary Lagrange beamforming algorithm combined with Zero-Forcing. It is demonstrated that the proposed beamforming method outperforms a conventional method which is the ZF at least by 8dB in terms of SNR through computer simulations. From experimental tests, we verify the feasibility of the proposed beamforming algorithm for realizing a practical LTE based TDD base-station for utilizing channel resources more efficiently.