• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.11
• /
• pp.21-30
• /
• 1998

In this paper, a digital current control system using a FPGA(Field Programmable Gate Array) was implemented, and the system was applied to an induction motor widely used as an industrial driving machine. The FPGA designed by VHDL(VHSIC Hardware Description Language) consists of a PWM(Pulse Width Modulation) generation block, a PWM protection block, a speed measuring block, a watch dog timer block, an interrupt control block, a decoder logic block, a wait control block and digital input and output blocks respectively. Dedicated clock inputs on the FPGA were used for high-speed execution, and an up-down counter and a latch block were designed in parallel, in order that the triangle wave could be operated at 40 MHz clock. When triangle wave is compared with many registers respectively, gate delay occurs from excessive fan-outs. To reduce the delay, two triangle wave registers were implemented in parallel. Amplitude and frequency of the triangle wave, and dead time of PWM could be changed by software. This FPGA was synthesized by pASIC 2SpDE and Synplify-Lite synthesis tool of Quick Logic company. The final simulation for worst cases was successfully performed under a Verilog HDL simulation environment. And the FPGA programmed for an 84 pin PLCC package was applied to digital current control system for 3-phase induction motor. The digital current control system of the 3 phase induction motor was configured using the DSP(TMS320C31-40 MHz), FPGA, A/D converter and Hall CT etc., and experimental results showed the effectiveness of the digital current control system.

• Journal of Korea Multimedia Society
• /
• v.3 no.3
• /
• pp.263-271
• /
• 2000

In this paper, an acoustic echo canceller(AEC) is implemented by ADSP-2181. This AEC uses a noise robust adaptive algorithm and a postprocessing method which attenuates residual echo using cross-correlation between estimated error signal and microphone input signal. We propose new postprocessing method that uses two thresholds to prevent signal distortion after postprocessing and to improve the performance of AEC without extra computational burden. Through experiments using a 16 bit fixed-point DSP board (ADSP-2181 EZ-KIT Lite board), it is shown that the noise robust adaptive algorithm performs well in the double-talk situations and the convergence speed is comparable to NLMS. Using the postprocessor, ERLE is improved about 20 dB. As a result, the AEC with a postprocessor shows better performance than conventional ones.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.10 no.3
• /
• pp.47-59
• /
• 2008

The recent trend of Sports Wear is seeking functionality and fashion at the same time, where the spread of sportism becomes caual style leading street fashion. Sports Wear is classified into active Sports Wear and Sports casual Wear, in which active Sports Wear is expanded to a mixture with Sports casual wear. The purpose of this study is to research the trend of materials used in active Sports Wear and Sports casual wear. Materials used for jacket/jumper, pants and t-shirts of active Sports Wear and Sports casual wear, and high-tech functional materials used for active Sports Wear have been analyzed. The results of the study are the following: a) Most of the materials used for Sports Wear are polyester, nylon, cotton, and a mixture of cotton and polyester. Active Sports Wear uses functional materials and texture such as Dri-Fit, which absorbs and dries fast, whereas Sports casual wear satin, cire and denim has been used to keep up with the trend rather than focusing in functionality: b) companies such as Nike and Adidas have used many high-tech materials to emphasize the functionality of Sports Wear, while Puma stresses on fashion rather than function, however uses spandex in order for the consumer to feel comfortable during physical activities; c) active Sports Wear in jacket/jumper, pants and t-shirts uses functional material and texture, however Sports casual wear uses satin and cire to keep up with the fashion trend rather than functionality; d) and Nike uses high-tech funtional materials for its Sports Wear in therma-fit, Clima-fit, Dri-fit and storm-fit, whereas Adidas uses Clirna-lite, Clirna-proof, Clima-warm, and Clirna-cool in their active Sports Wear.

• Journal of the Korean Society for Railway
• /
• v.12 no.4
• /
• pp.535-541
• /
• 2009

The reliability of control system composed of electronic parts has been studied by DoD since 1960, and has been undertaken mainly by Europe for railways. Especially in Korea, a study on reliability of signalling equipment has been taken since 2000, requiring reliability test for effective maintenance of old type signalling equipment which no longer has information on its past reliability. This study evaluates the reliability test in units of parts for old type signalling equipment; for instance, failure rate in units of parts, or failure data during operation; which was utilized without its consistent reliability monitoring and analysis data for over 20 years. Also, reliability change at this point in time has been estimated by using residual life span function, and a model which can evaluate the possibility of extended operation through stress acceleration test has been developed. This model will be utilized to establish future maintenance policy for train operating company's operation on old type signalling equipment.

• Journal of Embryo Transfer
• /
• v.27 no.1
• /
• pp.51-55
• /
• 2012

The objective of this study was to investigate the motility and kinematics of boar sperm that while stored at 4C. The samples of fresh boar semen were place into an extender, Androhep, and stored at $4^{\circ}C$. In three of these samples, cryoprotectants were added. The sperm's motilities and kinematics were evaluated by using microscope (${\times}400$) and the viability status was evaluated by using with eosin staining method. The 5 sample groups are; Goup A:Androhep (extender), stored at $17^{\circ}C$. Group B:Androhep (extender), stored at $4^{\circ}C$. Group C:Androhep (extender), + 3% glycerol (cryoprotectant), stored at $4^{\circ}C$. Group D:Androhep (extender), + 3% DMSO (cryoprotectant), stored at $4^{\circ}C$. Group E:Androhep (extender), + 3% ethylene glycol (cryoprotectant), stored at $4^{\circ}C$. In group A, the sperm's motility was reduced. On day one the sperm's motility was ($85.7{\pm}2.3$) and day 5 the motility was ($43.9{\pm}3.3$). In group B, C and D the sperm's motility were reduced to 0 on day 5. In group E the sperm's percentage of motility decreased. On day one the sperm's motility was ($42.0{\pm}0.5$) and day 5 the motility was ($2.3{\pm}0.3$). When comparing cryoprotectant in samples of boar sperm there is a slight improvement in the results when the use of Androhep Lite (extender), + 3% ethylene glycol (cryoprotectant), stored at $4^{\circ}C$ are used. Based on these results, ethylene glycol can protect sperm from heat shock at $4^{\circ}C$, but not satisfactory level. However, it showed the possibilities of liquid semen preservation at $4^{\circ}C$ by using cryoprotectant.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.8
• /
• pp.1196-1203
• /
• 2014

This study intended to compare the productive performance of three different layer raising systems; conventional cage (CC), barn (BR) and aviary (AV). The AV is welfare bestowed housing that allows free locomotion for birds within the BR. The BR allows bird's free locomotion inside BR but without multilevel structures. Both pullets and cockerels were housed together in both AV and BR, but only pullets in CC. Seventeen weeks old Lohmann Brown Lite (n = 800) pullets were housed in AV during this study. The same age layer pullets were simultaneously assigned to either at CC or BR to compare egg production performance with AV. The duration of experiment was 40 weeks (from 21st to 60th week). There were no remarkable differences in egg production, hen day egg production (HDEP) and average egg weight among three rearing systems. First 20 weeks (phase-1) average HDEP (%) of AV, CC, and BR were 85.9, 88.8, 87.1 and average egg weights (g) were 57.5, 59.9, and 56.9 respectively. Those of the remaining 20 weeks (phase-2) were 87.1, 87.9, 85.5 and 64.2, 63.0 62.1, respectively. Daily feed intakes (122 g, 110 g, 125 g); feed conversion ratio (2.4, 2.1, 2.5) and daily egg mass (53.9 g, 54.4 g, 52.8 g) data from AV, CC, and BR were not influenced significantly by the respective raising systems. Daily feed intake of layers in both AV (124 g) and BR (127 g) tended to be higher than that in CC (113 g) during phase-2. Overall, exterior egg quality (dirty and cracked eggs) in both phases was superior in BR compared with AV and CC, whereas CC generated intermediate results. This study indicated that the HDEP per se in AV and BR were not significantly different from that in CC. The study implied that the facility depreciation cost for AV and cost for increased feed intake in AV compared to CC are believed to be critical to evaluate the cost effectiveness of egg production in AV.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.2
• /
• pp.313-322
• /
• 2020

Objective: An experiment was conducted to investigate the response of laying hens fed corn distiller's dried grains with solubles (DDGS) that are naturally contaminated with deoxynivalenol (DON). Methods: One hundred and sixty 52-week-old Lohmann Brown Lite hens were randomly allotted to five dietary treatments with 8 replicates per treatment. The dietary treatments were formulated to provide a range of corn DDGS contaminated with DON from 0% to 20% (i.e., 5% scale of increment). All laying hens were subjected to the same management practices in a controlled environment. Body weight, feed intake and egg production were measured biweekly for the entire 8-week experiment. The egg quality was measured biweekly for 8 weeks. On weeks 4 and 8, visceral organ weights, blood metabolites, intestinal morphology, and blood cytokine concentrations were measured. Results: The inclusion of corn DDGS contaminated with DON in the diet did not alter (p>0.05) the body weight, feed intake, hen-day egg production, egg mass and feed efficiency of the laying hens. No difference was found (p>0.05) in the egg quality of hens that were fed the dietary treatments. Furthermore, hens that were fed a diet containing corn DDGS contaminated with DON showed no change (p>0.05) in the visceral organ weights, the blood metabolites, and the cytokine concentrations. The crypt depth increased (p<0.05) as the amount of corn DDGS contaminated with DON increased. Proportionately, the villus height to crypt depth ratio of the laying hens decreased (p<0.05) with the increasing level of corn DDGS contaminated with DON in the diet. Conclusion: The inclusion of corn DDGS contaminated with DON up to 20% in layer diets did not cause changes in egg production performance and egg quality, which indicates that DON is less toxic at the concentration of 1.00 mg DON/kg.

• Sleep Medicine and Psychophysiology
• /
• v.6 no.1
• /
• pp.46-51
• /
• 1999

Objectives: Patients with premenstrual dysphoric disorder(or PMDD) have impairments of the social, occupational or academic function due to psychological or somatic symptoms, which have the characteristic pattern of symptom exacerbation in the week before menses begin and remission shortly after the onset of menses. In the chronobiological view, many researchers have assumed that the etiology of PMDD is the advanced circadian rhythm. It has been suggested that light has a therapeutic effect on PMDD, because evening light results in phase delay of circadian rhythm through the biochemical changes including melatonin. Methods: The authors investigated the therapeutic effect of light therapy on four patients with prospectively diagnosed PMDD by DSM-IV criteria using clinical psychiatric interview, Premenstrual Assessment Form(PAF) and Daily Rating Form(or DRF). In the evening(6:30pm-8:00pm), the 2,500 lux light administered for seven consecutive days during the symptomatic late luteal phase of menstrual cycle. Beck Depression Inventory(or BDI), Hamilton Rating Scale for Depression(or HAM-D), Spielberg State Anxiety Inventory(or SA), and DRF were evaluated before and after seven days of light therapy. Results: Premenstrual symptoms of PMDD could be effectively treated with the evening bright light therapy, especially in PMDD patients with atypical symptoms. In addition, the light therapy seemed to more effective on the psychologic symptoms than the somatic symptoms of PMDD. There was no significant side-effect of light therapy, except the transient and mild eye-strain in one case. Conclusions: In spite of the results of limited data from our clinical trial, the authors suggest that the potential use of light therapy as an alternative to the pharmacological management of patients with PMDD.

• Journal of Sericultural and Entomological Science
• /
• v.15 no.1
• /
• pp.37-48
• /
• 1973

The purpose of this studies is to improve the cohesion of raw silk through various analyses on cocoon drying, cooking, reeling, re-reeling, and on the properties of water. Also we investigated the correlation between silk testing items which we have reached to the following results. 1. Drying of cocoon When cocoons were slowly dried with 100$^{\circ}C$, the results of cohesion became much better. On the other hand, the results were considerably decreased in case the temperature with 115$^{\circ}C$. 2. Cooking of cocoon In case of the cooking of cocoon, we found that the result of cohesion was best with incomplete cooking, that of the control was next, while in over cooking, the results were very low. Also the results of cohesion were much better when using the method of over cooking with sericin arrestive agent than that of incomplete cooking with sericin agglutinating agent. 3. Reeling of cocoon A) When the temperature of reeling bath was 25-45$^{\circ}C$, the results of cohesion test were much better, but at the temperature below 25$^{\circ}C$ or above 45$^{\circ}C$, the results became worse. B) With out the process of croissieur, the results of cohesion were too bad, but in case of croissieur more than 1cm, cohesion became better rapidly. Further more, we understood that the results of cohesion were improving slightly with longer length of croissieur. C) When the velocity of reeling was increased, the results of cohesion also improved. The best results were shown when reeling velocity was 180-220 r.p.m. But when the velocity was increased more than 220 r.p.m., the results of cohesion got worse more or less. D) When the temperature of the drying pipe in reeling machine was raised, the results of cohesion also showed a tendency to improve. 4. Re-reeling A) We could net reach a conclusion as to have correlation between the number of dipping repeat in vacuum tank and the results of cohesion before re-reeling process. B) When we used Seracol 500 as an agglutination protective agent with l/1000 to l/2000 of water, the results of cohesion test were better. C) When we used Pearl-lite as an agglutination protective agent with 1/1000 to 1/2000 of water, the results of cohesion were considerably better. D) We gained tile best results when used Cohesion Improving Chemical, A-80, with 500-1500 times diluted. 1) Results of cohesion was improved when humidity was low or temperature was high in the rereeling machine. 5. Filature water A) The water pH near the isoelectric point of protein showed the best cohesion, but the farther water pH, the worser results were obtained. B) With the increasing of M-alkalinity in filature water, the results of cohesion were worse. Above all, we understood the tendency of the results of cohesion get worse when the M-alkalinity is increased above 200 ppm. C) By increasing the total hardness of the filature water, it improved the results of cohesion. Especially, when the total hardness was above 300ppm, the results were extremely high. 6. Effects combination of each results A) The result of effects combination in filature processes with the obtained best conditions was distinctively improved. But the results could not reach in mathematicaly double effect. When reelied under worse conditions, the results of cohesion test were too bad. There was "effect limit" for the promotion. B) Generally the results of cohesion were bad when the filature conditions(the temperature, pressure and the properties of water, etc) are processed as sericin loss to be high. On the other hand, the results were very good when lower sericin loss was controlled in filature conditions. C) When filature conditions such as reeling velocity and croissieur length provide pysical cohesion ability and when raw silk dry fast during reeling and re-reeling, we found the result of cohesion was better. 7. Correlation of silk testing items. A) A negative correlation exists between the results of cohesion test and cleanness defect. Another word, the result of cohesion test was found to be worse as cleanness defect increased. B) In cleanness, cohesion has negative correlation against the number of slugs, but we could not find any correlation against long loops, loose ends. C) Cohesion has negative correlation against average neatness and low neatness defect. The better the results of neatness respectively, the better the results of cohesion found. D) There is no correlation between tenacity and the results of cohesion test, but there was high positive correlation between the results of elongation and those of cohesion test. The more elongation, the better the results of cohesion was found.

• Horticultural Science & Technology
• /
• v.33 no.3
• /
• pp.303-308
• /
• 2015

The consumption of leaf vegetables has been steadily increasing in Korea. Leaf vegetables are used for "Ssam (vegetable wrap-up), eaf vegetables has been steadily increasing in Korea. Leaf vegetables are used for asoned condiments inside several layers of young vegetable leaves. This study investigated the effect of air temperature on the growth and phytochemical contents of beet (Beta vulgaris L.) and Ssamchoo (Brassica lee L. ssp. namai) grown in a closed-type plant factory system where fluorescent lamps were used as an artificial light source. Seeds of beet and Ssamchoo were sown in a peat-lite germination mix. The roots of 20-day-old seedlings were washed, and the seedlings were planted on a styrofoam board and grown in hydroponic beds for 25 days under fluorescent light. Plants were exposed to one of three different air temperature regimes (20, 25 and $30^{\circ}C$ during the day combined with $18^{\circ}C$ during the night), which were monitored with a sensor at 30 cm above the plant canopy. Increased plant height and leaf area were observed in beet at $25^{\circ}C$ and $30^{\circ}C$ compared to $20^{\circ}C$. For Ssamchoo, the greatest plant height, leaf area, fresh weight and dry weight were obtained at $20^{\circ}C$. Ascorbic acid content of beet and Ssamchoo leaves were highest at $30^{\circ}C$. In beet, total polyphenol and flavonoid contents were higher at $20^{\circ}C$ (42.4, $197.0mg{\cdot}g^{-1}DW$) and $25^{\circ}C$ (46.9, $217.0mg{\cdot}g^{-1}DW$) than $30^{\circ}C$ (22.4, $88.0mg{\cdot}g^{-1}DW$). In Ssamchoo, total polyphenol and flavonoid contents were also higher at $20^{\circ}C$ (79.2, $268.2mg{\cdot}g^{-1}DW$) and $25^{\circ}C$ (66.3, $258.3mg{\cdot}g^{-1}DW$), respectively, than $30^{\circ}C$ (53.7, $134.7mg{\cdot}g^{-1}DW$). Hence, the optimum temperature appears to be $20^{\circ}C$ for growing both beet and Ssamchoo in a closed-type plant factory system with fluorescent light.