• 한국생산제조학회지
• /
• 제23권3호
• /
• pp.218-222
• /
• 2014

A 3D printer was used to fabricate a micro-TAS system for biomedical applications. A polymeric medical device fabrication based on a 3D printer can be performed at atmospheric conditions. A CAD- and CAM-based system is a flexible method to design medical components, and a 3D printer is a suitable device to perform this task. In this research, a 100-micron-wide fluidic channel was fabricated with a high-aspect ratio. A cross-sectional SEM image confirmed its possible usage in a micro-reactor using 3D printers. CNC-machined samples were compared to 3D printer-fabricated samples, and the advantages and disadvantages were discussed. Based on the SEM images, the surface roughness of the 3D printed reactor was not affected by wet or dry conditions due to its manufacturing principle. An aspect ratio of 5 to 1 was achievable with 100-${\mu}$ m-wide fluid channels. No melting was found, and the shape of channels was straight enough to be used for micro reactors.

• 수산해양교육연구
• /
• 제25권2호
• /
• pp.341-348
• /
• 2013

The auditory thresholds for 7 specimens of the sharp toothed eel Muraensox cinerus were measured at 5 frequencies by heartbeat conditioning method using pure tones coupled with a delayed electric shock. The audible range of the sharp toothed eel extended from 80Hz to 300Hz with the best sensitivity around 80Hz and 100Hz. In addition, the auditory thresholds over 200Hz increased rapidly. The mean auditory thresholds of the sharp toothed eel at the test frequencies of 80Hz, 100Hz, 200Hz and 300Hz were 87dB, 86dB, 105dB and 126dB, respectively. Auditory masking was determined for the sharp toothed eel by using masking stimuli with the spectrum level range of about 70~80dB (0dB re $1{\mu}Pa/\sqrt{Hz}$). According to white noise level, the auditory thresholds increased as compared with thresholds in a quiet background noise. The noise spectrum level at the start of masking was distributed at the range of about 64dB within 80~100Hz. Critical ratio ranged from minimum 24dB to maximum 40dB at test frequencies of 80Hz~200Hz.

• 한국전자파학회논문지
• /
• 제16권12호
• /
• pp.1213-1221
• /
• 2005

본 논문에서는 UHF 대역의 RFID 리더기용 송수신 겸용 이중 편파 안테나를 설계${\cdot}$제작하였다. RFID reader용 안테나에서 가장 중요시되는 각 포트간의 격리도나 편파 분리도 특성을 개선시키기 위해서 송${\cdot}$수신부의 급전 구조를 각각 설계하였고, 안테나의 방사부의 여기 방식은 시퀀셜 로테이션 방식으로 여기시켜 축비 대역폭을 증가시켰다. 제작된 안테나의 측정 결과로는 900 MHz${\~}$928 MHz에서의 안테나 이득은 약 2.35 dBi, 3 dB의 축비 범위에서 축비 대역폭은 150 MHz, 포트 격리도는 -38 dB${\~}$-40 dB, 원형 편파의 편파 분리도는 -30dB${\~}$-40 dB의 결과를 얻을 수 있었다.

• 한국위성정보통신학회논문지
• /
• 제10권1호
• /
• pp.17-21
• /
• 2015

본 논문에서는 아마추어 무선 HR(HAM Radio)을 기반으로 구축되는 새로운 무선 재난통신망인 이동단말용 위성 통신 무선패키지 시스템과 이 재난통신망에 접속하려는 D2D 단말의 채널 환경에 대해 소개한다. 이러한 재난통신망과 D2D 단말이 서로 재난통신할 때 재난정보를 멀티미디어 데이터급 수준으로 원활하게 전송 및 통신하기 위해서는 D2D 단말이 처한 다양한 재난상황에 적응적으로 채널 값을 추정하는 채널 모델링 연구가 요구된다. 따라서 본 논문에서 LOS component ratio 기반의 적응적 채널 모델링 기법을 제안하고, 제안한 기법의 성능을 Okumura-Hata model의 Open area 및 Urban area model과 비교하였다. 컴퓨터 시뮬레이션 결과 거리 대비 BER 성능 및 SNR 대비 BER 성능에서 이득이 있음을 확인하였다.

• Geomechanics and Engineering
• /
• 제37권2호
• /
• pp.123-133
• /
• 2024

This study investigates the effects of loading frequency (f) and specimen size on the liquefaction resistance of clean sand. A series of cyclic direct simple shear tests were conducted on Jumunjin sand with varying consolidated relative densities (40% and 80%), f values (0.05, 0.10, and 0.20 Hz), and diameter to height (D/H) ratios (3.63, 3.18, 2.82, and 2.54). The results demonstrated the significant influence of f and D/H ratio on the number of cycles to liquefaction (N_cyc-liq) and the cyclic resistance ratio (CRR₁₅). It was observed that increasing f linearly increased N_cyc-liq. Increasing the specimen height also led to higher N_cyc-liq values irrespective of the f or relative density. Moreover, a positive correlation between CRR₁₅ and f indicated that higher f yielded higher CRR₁₅. This relationship was more pronounced in dense sand than in loose sand. Specimen height also significantly affected CRR₁₅, with increasing the specimen height resulting in higher CRR₁₅ values. Furthermore, the effect of f on CRR₁₅ was less significant compared to the influence of specimen height. The effect of f on the normalized cyclic resistance ratio (NCRR) was relatively negligible for loose sand but more substantial for dense sand depending on the D/H ratio. Data analysis revealed that the NCRR generally decreases as the D/H ratio increases. An interpolation formula was provided to calculate the NCRR based on the D/H ratio regardless of the f and relative density.

• 한국주조공학회지
• /
• 제10권6호
• /
• pp.520-527
• /
• 1990

In order to reduce segregation in 12%Cr steel ingots of 60-100tons, numerical analysis by computer was applied to simulate solidification profiles and the profiles of liguid-solid coexisting zone in accordance with the ratios of H(Height) /D(diameter) of 100-ton ingot. The result is that the ratio of L(vertical length) /D(diameter) of liquid-solid coexisting zone was reduced in proportion to the decrease of H/D ratio. With the reduced H/D ratio(0.92) of ingot, the segregation in 60-ton ingot of 12% Cr steel can be much reduced and recovery was also improved by reducing ingot weight.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권6호
• /
• pp.2649-2669
• /
• 2020

In this paper, we analyze the secrecy performance of single-input multiple-output (SIMO) relay systems over κ-μ shadowed fading channels. Based on considering relay model employing decode-and-forward (DF) protocol, two security evaluation metrics, namely, secure outage probability (SOP) and probability of strictly positive secrecy capacity (SPSC) are studied, for which closed-form analytical expressions are derived. In addition, Monte Carlo results prove the validity of the theoretical derivation. The simulation results confirm that the factors that enhance the security include large ratio of (μ_D, μ_E), (m_D, m_E), (L_D, L_E) and small ratio of (k_D, k_E) under the high signal-to-noise ratio regime.

• 한국안전학회지
• /
• 제12권4호
• /
• pp.108-113
• /
• 1997

Plate anchors are primarily used in the foundation construction of earth-supported and earth-retaining structures. In order to estimate uplift capacity as well as suction force of clay, model tests were peformed with respect to various embedment depths and two different moisture contents in the prepared saturated kaolinite. Further, suction effects on the ultimate uplift capacity, at the various embedment depths of anchor, were also taken into account. Test results show that ultimate uplift capacity including suction force increases from 4.2kg at H/D=1 upto 11.6kg at H/D=5 in K1 and from 2.3kg at H/D=1 upto 7.3kg at H/D=5 in K2 respectively. The ratio of $F_s/Q_n/$ decreases along with the increases in the embedment ratio. In general, mud suction force under the ultimate uplift capacity in kaolinite decreases or becomes constant along with the increase of the embedment ratio.

• 한국수자원학회논문집
• /
• 제52권1호
• /
• pp.1-10
• /
• 2019

본 연구에서는 분류부 흐름에 대한 TELEMAC-2D 2차원 수치모형의 적용성을 검증하고, 수치실험을 통한 분류유량비 계산식의 비교분석, 분류유량비 변화에 따른 분류부 흐름특성 변화를 분석하였다. 본 수치모형은 분류부 수심평균 유속분포와 수위에 대해 실내실험결과와 잘 일치하는 결과를 나타냈다. 주수로의 하류방향 관성력과 모멘트가 감소하면 분류유량비가 증가하게 되고, 분류수로에서 상대적인 고유속 분포구간은 넓어지며, 분류수로 주흐름의 역방향 유속은 감소한다. 분류유량비가 증가할수록 분류수로 내 흐름분리구역 규모는 감소하며, 흐름분리구역 규모 산정시 유선분포 작도뿐만 아니라 종방향 프루우드 수가 $Fr{\approx}0$이 되는 지점 확인으로 더 명확하게 산정할 수 있다.

• Steel and Composite Structures
• /
• 제38권2호
• /
• pp.151-164
• /
• 2021

During the pipe forming process, a steel plate undergoes inelastic behavior multiple times under a load condition repeating tension and compression in the circumferential direction. It derives local reduction or increase of yield strength within the thickness of steel pipes by the plastic hardening and Bauschinger effect. In this study, a combined hardening model is proposed to effectively predict variations of yield strength in the circumferential direction of API-X65 and X70 steel pipes with relatively low t/D ratio during the forming process, which is expected to experience accumulated plastic strain of 2~3%, the typical Lüder band range in a low-carbon steel. Cyclic tensile tests of API-X65 and X70 steels were performed, and the parameters of the proposed model for the steels were calibrated using the test results. Bending-flattening tests to simulate repeated tension and compression during pipe forming were followed for API-X65 and X70 steels, and the results were compared with those by the proposed model and Zou et al. (2016), in order to verify the process of material model calibration based on tension-compression cyclic test, and the accuracy of the proposed model. Finally, parametric analysis for the yield strength of the steel plate in the circumferential direction of UOE pipe was conducted to investigate the effects of t/D and expansion ratios after O-forming on the yield strength. The results confirmed that the model by Zou et al. (2016) underestimated the yield strength of steel pipe with relatively low t/D ratio, and the parametric analysis showed that the t/D and expansion ratio have a significant impact on the strength of steel pipe.