• Applied Biological Chemistry
• /
• v.7
• /
• pp.15-19
• /
• 1966

In order to investigate the stability of the major component of malathion E.C. product, dimethyl S-(1, 2-dicarboxyethoxyethyl) dithiophosphate, toward the quality of glasswares as container, the amount of extractable inorganic components, change of pH and decomposition of the major component of the product were examined during the storage in brown-colored bottles of 100 ml. volume from 3 different companies in comparison with that in a Pyrex flask. 1. Malathion E.C. product was put in three containers A,B and C, and any changes occurring in storage were analyzed at three intervals of 60, 120 and 240 days. 2. It was shown that the amounts of Si, Mg, K, Ca, and Na extracted during these periods of storage differed markedly depending on the qualify of container. Container A revealed ten times higher extraction of Na and Ca than container B and C in a 8-month period. 3. Three commercial containers revealed the shift of pH from 6.5 to alkaline reaction in the storage whereas the Pyrex flask did not show any detectable change. In particular, the pH in container A changed to 9.2 in 60 days and 9.9 in 240 days. 4. The decomposition of malathion was the greatest in container A which showed the decomposition of 7.37% in 240 days. On the other hand, 0.5% was decomposed in the Pyrex flask. 5. The decemposition of malathion had a high correlation with the change of pH of water· in the same container, $r^2$ being 0.899. From the above results, it is concluded that about 10% of malathion E.C. product is decomposed in a year due to the alkaline metallic salts extracted from the container when it is stored in glassware bottles of lower quality.

• Restorative Dentistry and Endodontics
• /
• v.25 no.1
• /
• pp.46-55
• /
• 2000

During bonding procedure of composite resin, the prepared cavity can be contaminated by saliva. In this study, marginal microleakage and shear bond strength of a composite resin to primed enamel and dentin treated with artificial saliva(Taliva$^{(R)}$) were evaluated. For the marginal microleakage test, Class V cavities were prepared in the buccal surfaces of fifty molars. The samples were randomly assigned into 5 groups with 10 samples in each group. Control group was applied with a bonding system (Scotchbond$^{TM}$ Multi-Purpose plus) according to manufacture's directions without saliva contamination. Experimental groups were divided into 4 groups and contaminated with artificial saliva for 30 seconds after priming: Experimental 1 group ; artificial saliva was dried with compressed air only, Experimental 2 group ; artificial saliva was rinsed and dried. Experimental 3 group ; cavities were etched with 35% phosphoric acid for 15 seconds after rinsing and drying artificial saliva. Experimental 4 group ; cavities were etched with 35% phosphoric acid for 15 seconds and primer was reapplied after rinsing and drying artificial saliva. All the cavities were applied a bonding agent and filled with a composite resin (Z-100$^{TM}$). Specimens were immersed in 0.5% basic fuschin dye for 24 hours and embedded in transparent acrylic resin and sectioned buccolingually with diamond wheel saw. Four sections were obtained from one specimen. Degree of marginal leakage was scored under stereomicroscope and their scores were averaged from four sections. The data were analyzed by Kruscal-Wallis test and Fisher's LSD. For the shear bond strength test, the buccal or occlusal surfaces of one hundred molar teeth were ground to expose enamel(n=50) or dentin(n=50) using diamond wheel saw and its surface was smoothed with Lapping and Polishing Machine(South Bay Technology Co., U.S.A.). Samples were divided into 5 groups. Treatment of saliva-contaminated enamel and dentin surfaces was same as the marginal microleakage test and composite resin was bonded via a gelatin capsule. All specimens were stored in distilled water for 48 hours. The shear bond strengths were measured by universal testing machine (AGS-1000 4D, Shimaduzu Co., Japan) with a crosshead speed of 5 mm/minute. Failure mode of fracture sites was examined under stereomicroscope. The data were analyzed by ANOVA and Tukey's studentized range test. The results of this study were as follows : 1. Enamel marginal microleakage showed no significant difference among groups. 2. Dentinal marginal microleakages of control, experimental 2 and 4 groups were lower than those of experimental 1 and 3 groups (p<0.05). 3. The shear bond strength to enamel was the highest value in control group (20.03${\pm}$4.47MPa) and the lowest value in experimental 1 group (13.28${\pm}$6.52MPa). There were significant differences between experimental 1 group and other groups (p<0.05). 4. The shear bond strength to dentin was higher in control group (17.87${\pm}$4.02MPa) and experimental 4 group (16.38${\pm}$3.23MPa) than in other groups, its value was low in experimental 1 group (3.95${\pm}$2.51 MPa) and experimental 2 group (6.72${\pm}$2.26MPa)(p<0.05). 5. Failure mode of fractured site on the enamel showed mostly adhesive failures in experimental 1 and 3 groups. 6. Failure mode of fractured site on the dentin did not show adhesive failures in control group, but showed mostly adhesive failure in experimental groups. As a summary of above results, if the primed tooth surface was contaminated with artificial saliva, primer should be reapplied after re-etching it.

• Radiation Oncology Journal
• /
• v.24 no.1
• /
• pp.30-36
• /
• 2006

Purpose: It is well known from clinical experience that acute complications of chemoradiation therapy vary from patients to patients. However, there are no known factors to predict these acute complications before treatment starts. The human XRCC1 gene is known as a DNA base excision repair gene. We investigated the possibilities of XRCC1 gene polymorphisms as a predictor for the acute complications of chemoradiation therapy in colorectal cancer patients. Materials and Methods: From July 1997 to June 2003, 86 colorectal cancer patients (71 rectal cancer, 13 sigmoid colon cancer and 2 colon cancer patients) were treated with chemoradiation therapy at the Department of Radiation Oncology, Inha University Hospital. Twenty-two patients were in stage B, 50 were in stage C, 8 were in stage D and 6 patients were unresectable cases. External radiation therapy was delivered with 10MV X-ray at a 1.8 Gy fraction per day for a total dose of radiation of $30.6{\sim}59.4 Gy$ (median: 54 Gy). All the patients received 5-FU based chemotherapy regimen. We analyzed the acute complications of upper and lower gastrointestinal tract based on the RTOG complication scale. The initial and lowest WBC and platelet count were recorded during both the RT period and the whole treatment period. Allelic variants of the XRCC1 gene at codons 194, 280 and 399 were analyzed in the lymphocyte DNA by performing PCR-RFLP. Statistical analyses were carried out with the SAS (version 6.12) statistical package. Results: When all the variables were assessed on the multivariate analysis, recurrent disease revealed the factors that significantly correlated with upper gastrointestinal acute complications. Arg399Gln polymorph isms of the XRCC1 gene, the radiation dose and the frequencies of chemotherapy during radiation therapy were significantly correlated with lower gastrointestinal complications. Arg399Gln polymorph isms also affected the decrease of the WBC and platelet count during radiation therapy. Conclusion: Although the present sample size was too small for fully evaluating this hypothesis, this study suggests that Arg399Gln polymorph isms of the XRCC1 genes may be used as one of the predictors for acute complications of chemoradiation therapy in colorectal cancer patients.

• Korean Journal of Weed Science
• /
• v.5 no.1
• /
• pp.50-55
• /
• 1985

Effects of weed removal time on maize growth and yield were evaluated in the fields dominated with Poligonum spp., Chenopodium album, Echinochloa crusgalli and Digitaria adsendens from 1982 to 1983 in Suweon. Weed removal treatments were as follows: (a) kept weedfree all season, (b) weeded at 10 day intervals after maize emergence but stopped weeding at 3,5,7,9 leaf stages, (c) weeds initially removed at 3,5,7 and 9 leaf stages and the plots then kept weed free, (d) weeds left all season. Maize kept weed free from maize emergence to 7 leaf stages showed no grain yield reduction due to competition from weeds emerging later, but weeding from emergence to 3 and 5 leaf stages reduced grain yield 46 and 44%, respectively, in 1982 and 29 and 18%, respectively, in 1983. Weeding at 3 leaf stage and thereafter did not influence grain yield but initial weedings at 5, 7 and 9 leaf stages reduced grain yield 10, 36, and 67%, respectively, in 1982 and 14,18, and 21%, respectively, in 1983. Responses of maize to weeding time in the dry matter yields were same as in the grain yields.

• Korean Journal of Weed Science
• /
• v.12 no.2
• /
• pp.144-157
• /
• 1992

The study was conducted to compare the interprete methods and examine the feasibility of mixture use of oxyfluorfen and bensulfuron in controlling principal Paddy weeds, annuals and perennials. Application ratio of both chemicals were obtained from the combinations of 5 levels(0, 5, 10, 15, 20 g ai/ha) of each chemicals, respectively. All the treatments were applied at 5 days after transplanting and water was maintained at 3.0cm in depth. Shoot fresh-weight of weeds was assessed at 35 days after treatments. Data obtained was analysed by Colby, Isobole, Calculus, Regression and EQM method, respectively. The results from the analysis of variance on the principal weeds treated with oxyfluorfen and bensulfuron showed significant interactions at 1% level on both Echinochloa crus-galli and Eleocharis Kuroguwai, and total species at 0.5% level on both Potamogeton distinctus and Cyperus serotinus, but non significant on Scirpus juncoides and Sagittaria pygmaea. Thereafter, the results of the models applied to Echinochloa crus-galli, Eleocharis kuroguwai and total species were as follows ; 1. The Colby method gave values nearly identical to regression estimate method (both multiplicative models) as provided by Akobundu et al. The Colby method and Regression method indicated synergistic toward Echinochloa curs-galli, and total species, but antagonistic toward Eleocharis kuroguwai. 2. The Isobole method shows synergism on Echinochloa crus-galli at $ID_{50}$, and total species at $ID_{60}$ on Eleochari kuroguwai. 3. The Calculus method gave positive signs for the first differentiation and negative signs for the second differentiation except for some rates on Echinochloa crus-galli and total species, but reverse on Eleocharis kuroguwai. These result does not agree with the observed values. 4. ${\theta}$ value from the EQM method was greater than one at all combinations. This result was quite different from those of other methods. 5. The various models did not show the same results, but mixture of oxyfluorfen and bensulfuron tend to have synergistic effect. Weeding effect also was high. Treatment in terms of two chemical combination was expected to reduce rates, and to enhence weeding efficacy compared with single treatment.

• Korean Journal of Weed Science
• /
• v.12 no.2
• /
• pp.110-123
• /
• 1992

To investigate the safening effect of dymron against cinosulfuron, the responses of 104 rice cultivars and lines to single and mixture treatments of cinosulfuron [3-(4.6-dimethoxy-1,3,5-triazin-2-yl)-1-[2-(2-methoxyethoxy)-phenylsulfonyl]-urea] and dymron [1-(${\alpha}$, ${\alpha}$-dimethylbenzyl)-3-p-tolyl urea] were evaluated. The responses of 104 rice cultivars and lines to cinosulfuron were differed. Among the rice cultivars, growth of Calrose, Dasukei, Hwajinhyeo, and Milyang 105 was significantly inhibited by cinosulfuron but there was no inhibition in Daeseongbyeo, Iri 371, Jangseongbyeo, Taebaegbyeo and IR 74. The japonica types were generally inhibited more than the indica and indica${\times}$japonica types. When Kwangmyungbyeo was treated with the mixtures of cinosulfuron 48g and 96g ai/ha with dymron 450g ai/ha, the inhibition of plant height was significantly reduced regardless of dymron concentrations. With increase in cinosulfuron concentration, the safening effect of dymron against cinosulfuron was more evident in plant height than fresh weight. On the other hand, dymron did not have any safening effects of cinosulfuron on Echinochloa crus-galli at any concentrations. The mixtures of dymron and cinosulfuron produced antagonistic effects on the plant height regardless of rice cultivars and treatment concentrations. At cinosulfuron 24g ai/ha, the effects of the mixtures of cinosulfuron and brassinolide on the plant height of Kwangmyungbyeo and IR 74 were similar irrespective of brassinolide concentrations but the inhibition of Kwangmyungbyeo was greater than that of IR 74 as the concentrations of cinosulfuron increased. The effects of the mixtures of cinosulfuron at concentration of 96g ai/ha with various ABA levels on the plant height of both Kwangmyungbyeo and IR 74 showed synergistic effect regardless of ABA concentration. However, the response of fresh weight of both cultivars treated with cinosulfuron at 96g ai/ha with ABA synergisism was observed in Kwangyungbyeo while IR 74 showed antagonism.

• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.2
• /
• pp.125-133
• /
• 1984

To obtain the basic date for the improvement of cultural and managemental problems caused by soil characteristics and soil productivity in rice cultivation of Honam area, morphological characteristics of rice soils were investigated in Mangeng-Dongjin and Yeongsan Water-sheds, and compaired differences between two major Watersheds. The results obtained are summarized as follows: 1. According to U.S.D.A. Soil Taxonomy Classification System, eight great groups are distributed in rice soils of two major Watersheds. More than 50% of rice paddy soils are classified as Haplaquepts. 2. Two Watersheds are quite different in soil parent materials. In Mangeong-Dongjin Watershed, most soils (55.1%) are derived from fluvic-marine deposits. Remainders are derived from local alluvium (24.7%) and alluvium (14.2%). But in Yeongsan Watershed, the order is local alluvium>alluvium>fluvio-marine deposits. 3. Rice soils occur mostly in coastal and inland flat-site with the slope of less than 2% (57.8%) in Mangeong-Dongjin Watersheds. However, in Yeongsan Watershed, flat-site and low undulating terrace are mostly distributed (52.9%). 4. About 81.9, 61.4 and 53.3% of rice soils are classified as fine textured in Yeongsan, Dongjin, and Mangeong Watersheds, respectively. 5. More normal paddy soils and less sandy paddy soils are distributed in Yeongsan Watershed. The results indicate that more rice soils are classified as productivity classes of I and II in Yeongsan Watershed than in Mangeong-Dongjin Watersheds.

• Journal of Preventive Medicine and Public Health
• /
• v.19 no.2 s.20
• /
• pp.252-262
• /
• 1986

In order to assess the degree of atmospheric pollution and to contribute the health improvement of residents in Pusan, the authors measured CO, $SO_2,\;NO_2$ and TSP level at 3 places by season and time from July, 1985 to April, 1986. The places were Somyon, Sasang and Daeshin-dong, which were known as the commercial, industrial and residental area in Pusan, respectively. The obtained results were as follows: 1) The average concentration of CO was highest with $2.19{\pm}0.52$(3.5-1.0)ppm at Sasang area, and lowest with $1.32{\pm}0.55$(3.0-0.5)ppm at Daeshin-dong areas. 2) The average concentration of $SO_2$ was highest with $0.092{\pm}0.073$(0.378-0.028)ppm at Sasang, and lowest with $0.041{\pm}0.014$(0.083-0.019)ppm at Daeshin-dong. 3) The average concentration of $NO_2$ was highest with $0.069{\pm}0.012$(0.090-0.050)ppm at Somyon, and lowest with $0.043{\pm}0.010$(0.061-0.032)ppm at Daeshin-dong. 4) The average concentration of TSP was highest with $300{\pm}130(780-130){\mu}g/m^3$ at Sasang, and lowest with $160{\pm}80(390-70){\mu}g/m^3$ at Daeshin-dong. 5) The level of CO and TSP were highest in summer at Somyon and Daeshing-dong, and in winter at Sasang, respectively. The level of $SO_2$ and $NO_2$ were highest in winter and spring at all areas. 6) The level of all air pollutants were higher in the afternoon or night than in the morning.

• Journal of Korean Society of Forest Science
• /
• v.47 no.1
• /
• pp.52-61
• /
• 1980

This study is carried out to learn the properties of forest soils in Korea and propose the reasonable management methods of forest land. Among 178 soil series surveyed until now in Korea forest soils include 64 series broken down according to the weathered products into 5 categories such as residual materials on mountain and hill, residual materials on rolling and hill, colluvial materials on local valley and fans, alluvial materials and volcanic ash soils. What discussed in this paper are classification system, parent rocks, texture class and drainage conditions of Korean forest soils. The characteristics of Korean forest soil properties classified in U.S.D.A. soil classification system are as follows: 1. Residual soils on mountain and hill (29 soil series) are almost Lithosols without any distinct soil profile development. They have loamy skeletal (11 series), coarse loamy (5 series), fine loamy (3 series), and fine clayey soils (3 series). Their drainage conditions are somewhat excessively drained in 16 series and well drained in 7 series. 2. Residual soils on rolling and hill (19 series) are Red-Yellow Podzolic soils with well developed soil profiles. They have coarse and fine loamy texture in 12 series and fine clayey texture in 5 series mostly with well drained condition. 3. Colluvial soils on local valley and fans (13 series) include mostly Regosols and some Red-Yellow Podzolic Soils and Acid Brown Forest Soils. They have loamy skeletal (4 series), coarse loamy (3 series), fine loamy (3 series), and fine clayey soils (2 series) with well drained condition. 4. Soil textures of weathered products of parent rocks are as follows: 1) Parent rocks producing coarse texture soils are rhyolite, granite gneiss, schist, shale, sandstone, siltstone, and conglomerate. 2) Parent rocks producing fine and heavy texture soils are limestone, basalt, gabbro, and andesite porphyry. 3) Granite is a parent rock producing various textured soils.

• Journal of dental hygiene science
• /
• v.9 no.2
• /
• pp.169-179
• /
• 2009

This study aims to present a fundamental data base to figure out the mental and the physical conditions that the dental technicians are facing and ultimately to develop a health care program to deal with their health related problems. To this end, we took an analysis on the health status among the subjects of 895 dental technicians currently working at the dental lab around the nation from January 15 to March 31, 2009 by way or Todai Health Index(THI). Of the average scale point in accordance with 12 scale scores of the physical and the mental subjective symptom, the results revealed that the physical appeals (21.10) were higher than the mental appeals (18.49) and the multiple subjective symptom was marked as 38.44 followed by the mental irritability (25.92). In gender differences, the females proved to be higher than the males in both physical appeals and mental appeals while the physical appeals were dominant in both genders. The physical appeals were higher than the mental appeals with regard to the general characteristics. In the case or the group or age twenties as shown in the physical and mental average scale point, the other groups showed 21.55% of the physical appeals among the married whereas the mental appeals showed the highest point as 18.70 in the unmarried group. In job position, the other groups marked the highest, in working condition, below average group marked the highest, in frequency of break time, none group marked the highest. We drew a conclusion form this study that the dental technicians gained the higher points in the item or the multiple subjective symptom, the menial irritability, and the irregular life. More research on th is phenomena should be followed along with the development of various and practical health care programs to promote the health or dental technicians.