• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.668-671
• /
• 2007

A numerical study was conducted on a simplified model of a high-temperature solar receiver which incorporates liquid-metal heat pipe. The objective of this paper is to compare the isothermal characteristics of the heat pipe receiver with the conventional receiver utilizing convection of molten salt as heat carrier. The solar receiver was assumed to be subject to a concentration ratio between 50 and 1,000 to supply high-temperature heat to a stirling engine for electric power generation. For simplicity of the analysis, a cylindrical geometry was assumed and typical dimensions were used based on available literature. The heat pipe had a shape of double-walled cavity and the working fluid was a sodium. The analysis was performed assuming that the radiation heat flux on the inner walls of the receiver was uniform, since the focus of this study was laid on the comparison of the conventional type and heat pipe type receiver. The results showed that the heat pipe type exhibited superior performance when the operating temperature becomes higher. In addition, to explore the advantage of the heat pipe receiver, the channel shape and dimensions should be adjusted to increase the heat transfer area between the wall and the heat trnasfer medium.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 The 8th Asian Symposium on Precision Forging ASPF
• /
• pp.26-30
• /
• 2003

Since the dimension of cold forged part is larger than the cavity size of forging die, the difference results from the various features, such as, the elastic characteristics of die and workpiece, thermal influences, and machine-elasticity. All of these factors should be considered to get more accurate prediction of the dimension of forged part. In this paper, severe FE techniques are proposed to improve the prediction accuracy of dimension for cold forged part. To validate the importance of the above mentioned factors, and the estimated results are compared with the experimental results. The used model is a closed die upsetting of cylindrical billet. The calculated dimensions are well coincided with .the measured values based on the proposed techniques. The proposed techniques have put two simple but important points into Fe simulation. One is the separation of forging stages into 3 steps, from a loading through punch retraction to ejecting stage. The other is the dimensional change, according to the temperature changes due to the deformation. The FE analysis could predict the dimension of cold forged part within the $10{\mu}m$, based on the more realistic consideration.

• 대한기계학회논문집B
• /
• 제20권10호
• /
• pp.3313-3321
• /
• 1996

A fundamental study in cooling and solidification process focused on ice storage was performed, including the interesting phenomena of density inversion, supercooling and dendritic ice. A numerical study was performed for natural convection and ice formation in the cooling and freezing processes with supercooling in a space between double cylinders. When water was cooled under the freezing point by a cooling wall in a cavity, solidification was not started at once, but a subcooled region was formed near the wall. Especially, when the cooling rate was low, subcooled region extended to a wide area. However, after a few minutes, supercooling is released by some triggers. Dendritic ice is suddenly formed within a subcooled region, and a dense ice layer begins to be developed from the cooling wall. Due to the difficulties, most previous studies on solidification process with numerical methods had not treated the supercooling phenomena, i.e. the case considering only the growth of dense ice. In this study, natural convection and ice formation considering existence of supercooling and dendritic ice were analyzed numerically with using finite difference method and boundary fixing method. The results of numerical analysis were well compared with the experimental results.

• Applied Microscopy
• /
• 제43권2호
• /
• pp.47-53
• /
• 2013

The trichomes on leaves of three species of Mentha such as M. spicata, M. suaveolens, and M. piperita var were examined by scanning electron microscopy. Simple non-glandular trichomes and peltate glandular trichomes were distinctively occurred on these leaves. In M. spicata, short and sharp non-glandular trichomes were dominantly appeared on adaxial surface, whereas capitate glandular trichomes were commonly localized on abaxial surface. In M. suaveolens, non-glandular trichomes were identified with simple unbranched and branched. Unbranched trichomes which were sharp and pointed in shape occurred on adaxial surface, however, branched and v-shaped trichomes appeared abundantly on abaxial surface. Peltate trichomes consisted of a large eight-celled head. Small capitates trichomes consisted of a cylindrical head with an one-celled uniseriate stalk. In M. piperita var, single non-glandular trichomes and peltate trichomes were present on adaxial surface. Small capitate trichomes consisted of a globose unicellular head with a two- or three-celled uniseriate stalk. Peltate trichomes were distinctly present on abaxial surface, whereas they were not observed on adaxial surface. The trichomes were less dense in this species. Peltate trichomes consisted of a large eight-celled head, with an enlarged secretory cavity, attached to an one-celled short stalk.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 고액공존금속의 성형기술 심포지엄
• /
• pp.174-182
• /
• 1997

The technology of Semi-Solid Forging (SSF) has been actively developed to fabricate near-net-shape products using light and hardly formable materials. Generally, the SSF process is composed of slug heating, forming, compression -holding and ejecting step. After forming step in SSF, the slug is compressed during a certain holding time in order to be completely filled in the die cavity and be accelerated in solidification rate. The compression holding time that can affect microstructural characteristics and shape of products is important to make decision, where it is necessary to find overall heat transfer coefficient properly which has large effect on heat transfer between slug and die. This paper presents the procedure to predict compression holding time of obtaining the final shaped part with information of temperature and solid fraction for a cylindrical slug at compression holding step in closed-die compression process using heat transfer analysis considering latent heat by means of finite element method. The influence of the predicted compression holding time on microstructural characteristics of products is finally investigated by experiment.

• 비파괴검사학회지
• /
• 제20권2호
• /
• pp.102-109
• /
• 2000

본 논문에서는 체적형 결함과 균열형 결함에 대한초음파산란 현상을 모델링하기 위한 두가지 이론을 설명하였다. 동탄성 Kirchhoff 근사 (EKA)와 기하학적 회절이론 (GTD)이 각각 원주형 기공과 반무한 균열에 적용되었다. 이 두 이론은 고주파수 근사법으로 알려져 있다. 모델 결함들에 평면파가 입사하는 경우의 2차원 동탄성 산란 문제를 고려하였으며 산란장을 반사계수와 회절계수의 항으로 구하였다. 원거리에서 산란파의 변위에 대한 입사파 변위의 비를 관찰 방향의 함수로 구했으며 그 결과를 경계요소법과 비교하였다.

• 소성∙가공
• /
• 제26권3호
• /
• pp.156-161
• /
• 2017

In this study, the reason of die fracture occurring in hot forging of an aluminum fixed scroll was studied, based on experiments and finite element predictions. The material is assumed to be rigid-viscoplastic, and the die is rigid for the finite element predictions. The stress in the tension at the wrap root is known to cause brittle fracture, and the increase in the tensile stress is owing to the unbalanced filling of material into the die cavities between both sides of the warp. Based on the empirical and numerical achievements, the effects of geometrical parameters of the material on the die fracture were examined to find practical measures for elongated die life. It has been shown from the parametric study that the material with the optimized trapezoidal cross-section, which can be easily made during cutting or the optimized cylindrical billet with its eccentric placement in the die cavity, can considerably reduce the magnitude of the tensile stress around the die corner fractured, indicating that economical manufacturing with reduced number of stages and elongated die life can be realized at once using the optimized practical initial material.

• 한국수의병리학회:학술대회논문집
• /
• 한국수의병리학회 2001년도 추계학술대회 및 정기총회
• /
• pp.28-28
• /
• 2001

A primary metastatic malignant plasma cell tumor was diagnosed in a 7-year-old, female mixed breed dog. The dog was admitted to Veterinary Teaching Hospital at College of Veterinary Medicine, Seoul National University after suffering from depression, anorexia, and dyspnea. In radiographic examination, a large occupying mass was found at the right cranial thorax. Due to poor prognosis, the dog was euthanized. At surgery, numerous, firm, round, nodules, 1 to 2 cm in diameter were noted in the ribs. The nodules were often confluent and had cylindrical appearance. Osteolysis was associated with the nodules. A large amount of clear fluid was present in the thoracic cavity. The spleen and liver were markedly enlarged and congested. Histologically, the mass was diagnosed as plasma cell tumor which was believed to be originate from the rib. Evidence of metastasis was observed in the spleen, liver, and kidney.

• 한국통신학회논문지
• /
• 제12권2호
• /
• pp.133-138
• /
• 1987

본 논문에서는 Re-enterant 공동 공진기의 내부 도체봉 길이 변화에 따른 공진 주파수의 가변특성을 실험정그로 고찰하였다. 실험시 제작된 공진기는 동축 케이블과 원형 도파관을 경합한 형태로서 동축 케이블의 내부 도체봉의 길이를 축방향으로 면화시킬 수 있도록 하여, 내부 도체봉의 임의의 길이에 대한 Tmonq 모드의 공진 주파수를 측정하였다. 경과의 타당성을 입증하기 위해서 실험 경과와 여러 사람들의 이론치를 비교하였다. 본 실험의 결과는 파장계, 공진기?l 증폭기의 공진 회로의 설계및 제작에 활용할 수 있으며 마이크로 웨이브 집적회로(MIC, Microwave Integrated Circuits)나 여과기에 사용되는 유전체 공진기의 공진 주파수를 가변시키는데도 사용할 수 있다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2834-2838
• /
• 2008

An free breathing proton exchange membrane fuel cell (PEMFC) was developed. This paper presents a study of the several effect on the performance of a fuel cell such as air flow rate, opening ratio, and cathode structures. Especially, an air flow rate is critical condition to improve the fuel cell performance. In this paper, we developed a synthetic jet micro air blower to supply high stoichiometric air. The synthetic jet actuation is usually generated by a traditional PZT-driven actuator, which consists of a small cylindrical cavity, orifices and PZT diaphragms. In comparison with free convection fuel cells, the forced-convection fuel cell which equipped synthetic jet micro air blower brings higher performance and stability for long term test. Also, power consumption of the synthetic jet micro air blower is under 0.3W. The results show that the maximum power density was $188mW/cm^2$ at $400mA/cm^2$. The maximum power density was higher 40% than power density of free convection fuel cell.