• Journal of Satellite, Information and Communications
• /
• v.11 no.3
• /
• pp.119-122
• /
• 2016

Feature detection is recognized as an accurate spectrum sensing approach when the information of the desired signal is partly known at the receiver. This type of detection was proposed to overcome large noise environment. Cyclostationary detection is an example of feature detection in spectrum sensing technique in cognitive radio. However, the cyclostationary process calculation requires a lot of processing time and information about the designed signals. On the other hand, energy detection spectrum sensing is widely known as a simple and compact spectrum sensing technique. However, energy detection is highly affected by large noise and lead to high detection error probability. In this paper, the combination of energy detection and cyclostationary is proposed in order to increase the accuracy and decrease the calculation and processing time. The two-layer threshold is utilized in order to reduce the complexity of computation and processing time in cyclostationary which can lead to the improved throughput of the system. The simulation result shows that the implementation of energy-based cyclostationary detector can help to improve the performance of the system while it can considerably reduce the required time for signal detection.

• Journal of Communications and Networks
• /
• v.6 no.2
• /
• pp.93-105
• /
• 2004

This paper discusses cyclostationary interference suppression for multiuser wired communication systems. Crosstalk interference from digital signals in multipair cables has been shown to be cyclostationary. Many crosstalk equalization or suppression techniques have been proposed which make implicit use of the cyclostationarity of the crosstalk interferer. In this paper, the convergence and steady-state behaviors of a fractionally spaced equalizer (FSE) in the presence of multiple cyclostationary crosstalk interference are thoroughly analyzed by using the equalizer's eigenstructure. The eigenvalues with multiple cyclostationary interference depend upon the folded signal and interferer power spectra, the cross power spectrum between the signal and the interferer, and tile cross power spectrum between the interferers, which results in significantly different initial convergence and steady-state behaviors as compared to the stationary noise case. The performance of the equalizer varies depending on the relative clock phase of the symbol clocks used by the signal and multiple interferers. Measued characteristics as well as analytical model of NEXT/FEXT channel are used to compute the optimum and worst relative clock phases among the signal and multiple interferers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7A
• /
• pp.724-729
• /
• 2007

In this paper, we consider a joint optimization of transmitter and receiver in additive cyclostationary noise with zero forcing criterion. We assume that the period of the cyclostationary noise is the same as the inverse of the symbol transmission rate and that the noise has a positive-definite autocorrelation function. The data sequence is modeled as a wide-sense stationary colored random process and the channel is modeled as a linear time-invariant system with a frequency selective impulse response. Under these assumptions and a constraint on the average power of the transmitted signal, we derive the optimum transmitter and receiver waveforms that jointly minimizes the mean square error with no intersymbol interference. The simulation results show that the proposed system has a better BER performance than the systems with receiver only optimization and the systems with no transmitter and receiver optimization.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7C
• /
• pp.672-679
• /
• 2006

Cognitive radio, which is designed to dynamically adapt its transmission to the environments, is believed to be one of the fundamental techniques for future spectrum utilization. As the first step of cognitive radio, spectrum sensing is treated as the most important technique, through which cognition is well explained. In this paper, we propose a spectral correlation based detection method for spectrum sensing. An unlicensed secondary user system operating in TV broadcast bands is taken as an example. Based on the cyclostationarity of communication signals, spectral correlation function is used to minimize the effect of random noise and interference. Energy measurement and peak detection based criteria are proposed. Simulation results show that the proposed detection method outperforms the energy detection and is more suitable for spectrum sensing in cognitive radios.

• Journal of Communications and Networks
• /
• v.15 no.3
• /
• pp.245-251
• /
• 2013

This paper addresses the issue of time-difference-of-arrival (TDOA) estimation for complex noncircular signals. First, under the wide-sense stationary assumption, we derive the maximum likelihood (ML) estimator and the Cramer-Rao lower bound for Gaussian noncircular signals in Gaussian circular noise. The ML estimator uses the second-order statistics information of a noncircular signal more comprehensively when compared with the cross-correlation (CC) and the conjugate CC estimators. Further, we present a scheme to modify the traditional signal-selective TDOA methods for noncircular signals on the basis of the cyclostationarity of man-made signals. This scheme simultaneously exploits the information contained in both the cyclic cross-correlation (CCC) and the conjugate CCC of a noncircular signal.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.906-911
• /
• 2001

In this paper, LPI(low probability of intercept) and AJ(anti jamming) performance of the chirped BPSK system are analyzed. In the chirp method the cyclostationary of the signal is eliminated, since the instantaneous frequency is varied randomly within the whole spread bandwidth. Therefore, chirp method is considered for good LPI system against DAM(delay-and-multiplier) or SC (squaring circuit) interceptor which detects the chip rate or carrier frequency. Longer chirp duration makes the LPI performance better. From the simulation results, the chirp method has better AJ performance than DS(direct sequence) system in the PBNJ(partial band noise jammer) channel. At the same JSR(jammer to signal power ratio) level, chirped BPSK system has more robust AJ performance against MTJ(multi-tone jammer) than PBNJ.

• Journal of Communications and Networks
• /
• v.17 no.1
• /
• pp.1-11
• /
• 2015

In this paper, the transmission of an improper-complex second-order stationary data sequence is considered over a strictly band-limited frequency-selective channel. It is assumed that the transmitter employs linear modulation and that the channel output is corrupted by additive proper-complex cyclostationary noise. Under the average transmit power constraint, the problem of minimizing the mean-squared error at the output of a widely linear receiver is formulated in the time domain to find the optimal transmit and receive waveforms. The optimization problem is converted into a frequency-domain problem by using the vectorized Fourier transform technique and put into the form of a double minimization. First, the widely linear receiver is optimized that requires, unlike the linear receiver design with only one waveform, the design of two receive waveforms. Then, the optimal transmit waveform for the linear modulator is derived by introducing the notion of the impropriety frequency function of a discrete-time random process and by performing a line search combined with an iterative algorithm. The optimal solution shows that both the periodic spectral correlation due to the cyclostationarity and the symmetric spectral correlation about the origin due to the impropriety are well exploited.

• Journal of Satellite, Information and Communications
• /
• v.1 no.1
• /
• pp.5-11
• /
• 2006

Cognitive radio, which is designed to dynamically adapt its transmission to its environments is believed to be one of the fundamental techniques for the future spectrum utilization. As the first step of cognitive radio, spectrum sensing is treated as the most important technique. In this paper, we propose a spectral correlation based detection method for spectrum sensing. Based on the cyclostationarity of communication signals, spectral correlation function is used to minimize the effect of random noise and interference. The ROC performance of conventional energy detection is shown. Simulation result show that the proposed detection method outperforms the energy detection and more suitable for spectrum sensing in cognitive radios.

• Journal of Information Processing Systems
• /
• v.15 no.3
• /
• pp.604-615
• /
• 2019

Single-user spectrum sensing is susceptible to multipath effects, shadow effects, hidden terminals and other unfavorable factors, leading to misjudgment of perceived results. In order to increase the detection accuracy and reduce spectrum sensing cost, we propose an adaptive cooperative sensing strategy based on an estimated signal-to-noise ratio (SNR). Which can adaptive select different sensing strategy during the local sensing phase. When the estimated SNR is higher than the selection threshold, adaptive double threshold energy detector (ED) is implemented, otherwise cyclostationary feature detector is performed. Due to the fact that only a better sensing strategy is implemented in a period, the detection accuracy is improved under the condition of low SNR with low complexity. The local sensing node transmits the perceived results through the control channel to the fusion center (FC), and uses voting rule to make the hard decision. Thus the transmission bandwidth is effectively saved. Simulation results show that the proposed scheme can effectively improve the system detection probability, shorten the average sensing time, and has better robustness without largely increasing the costs of sensing system.