• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.10
• /
• pp.21-26
• /
• 2003

In this research, the change of coefficient of thermal expansion (CTE) of graphite/epoxy composite laminate under space environment was measured using fiber optic sensors. Two fiber Bragg grating (FBG) sensors have been adopted for the simultaneous measurement of thermal strain and temperature. Low Earth Orbit (LEO) conditions with high vacuum, ultraviolet and thermal cycling environments were simulated in a thermal vacuum chamber. As a pre-test, a FBG temperature sensor was calibrated and a FBG strain sensor was verified through the comparison with the electric strain gauge (ESG) attached on an aluminun specimen at high and low temperature respectively. The change of the CTE in a composite laminate exposed to space environment was measured for intervals of aging cycles in real time. As a whole, there was no abrupt change of the CTE after 1000 aging cycles. After aging, however, the CTE decreased a Little all over the test temperature range. These changes are caused by outgassing, moisture desorption, matrix cracking etc.

• Korean Journal of Materials Research
• /
• v.23 no.12
• /
• pp.680-686
• /
• 2013

Tungsten oxide films were prepared by an electrochemical deposition method for use as the anode in rechargeable lithium batteries. Continuous potentiostatic deposition of the film led to numerous cracks of the deposits while pulsed deposition significantly suppressed crack generation and film delamination. In particular, a crack-free dense tungsten oxide film with a thickness of ca. 210 nm was successfully created by pulsed deposition. The thickness of tungsten oxide was linearly proportional to deposition time. Compositional and structural analyses revealed that the as-prepared deposit was amorphous tungsten oxide and the heat treatment transformed it into crystalline triclinic tungsten oxide. Both the as-prepared and heat-treated samples reacted reversibly with lithium as the anode for rechargeable lithium batteries. Typical peaks for the conversion processes of tungsten oxides were observed in cyclic voltammograms, and the reversibility of the heat-treated sample exceeded that of the as-prepared one. Consistently, the cycling stability of the heat-treated sample proved to be much better than that of the as-prepared one in a galvanostatic charge/discharge experiment. These results demonstrate the feasibility of using electrolytic tungsten oxide films as the anode in rechargeable lithium batteries. However, further works are still needed to make a dense film with higher thickness and improved cycling stability for its practical use.

• Restorative Dentistry and Endodontics
• /
• v.41 no.4
• /
• pp.246-254
• /
• 2016

Objectives: The aim of this investigation was to give insights into the impact of carbohydrate-electrolyte drinks on the likely capacity of enamel surface dissolution and the influence of human saliva exposure as a biological protective factor. Materials and Methods: The pH, titratable acidity (TA) to pH 7.0, and buffer capacity (${\beta}$) of common beverages ingested by patients under physical activity were analyzed. Then, we randomly distributed 50 specimens of human enamel into 5 groups. Processed and natural coconut water served as controls for testing three carbohydrate-electrolyte drinks. In all specimens, we measured surface microhardness (Knoop hardness numbers) and enamel loss (profilometry, ${\mu}m$) for baseline and after simulated intake cycling exposure model. We also prepared areas of specimens to be exposed to human saliva overnight prior to the simulated intake cycling exposure. The cycles were performed by alternated immersions in beverages and artificial saliva. ANOVA two-way and Tukey HDS tests were used. Results: The range of pH, TA, and ${\beta}$ were 2.85 - 4.81, 8.33 - 46.66 mM/L and 3.48 - $10.25mM/L{\times}pH$, respectively. The highest capacity of enamel surface dissolution was found for commercially available sports drinks for all variables. Single time human saliva exposure failed to significantly promote protective effect for the acidic attack of beverages. Conclusions: In this study, carbohydrate-electrolyte drinks usually consumed during endurance training may have a greater capacity of dissolution of enamel surface depending on their physicochemical proprieties associated with pH and titratable acidity.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.1
• /
• pp.117-126
• /
• 1984

Aflatoxins are toxic and carcinogenic secondary metabolites which are produced by trains of A. flavus and A. parasiticus during their growth on foods and feedstuffs. Aflatoxins are a group of closely related heterocyclic compounds of which $B_1$, $B_2$, and $G_2$ are the major members. Aflatoxins are synthesized via a polyketide pathway in which the general steps are acetate, an-thraquinones, xanthone and aflatoxins. Aflatoxin formation is favored by high moisture or high $a_w$(0.95${\sim}$0.99). The limiting $a_w$ for aflatoxin production on agricultural commodities is 0.83. Optimum temperature for aflatoxin production by the molds is $25{\sim}30^{\circ}C$ and the incubation time for the maximum production of the toxin is 7${\sim}$15 days. The limiting temperatures for aflatoxin production are ${\leq}7.5^{\circ}C\;and\;\geq40^{\circ}C$. Cycling temperatures may or may not stimulate aflatoxin production depending on the amplitude of cycling, substrate and strains of molds. Aflatoxin pro-ducing molds are aerobic organisms and thus have a requirement for oxygen. A decreasing $O_2$ concentration and/or increasing concentrations of $CO_2$ or $N_2$ depress the mold growth and aflatoxin formation. A. flavus grows competitively or associatively in the presence of other microorganisms and occasionally loses the competition with other microorganisms. Some lactic acid bacteria have been shown to reduce growth and aflatoxin production by A. parasiticus. Carbon source is the most important nutritional factors affecting aflatoxin formation by the molds. Sucrose, fructose and glucose are the most favorable carbon sources. Food substrates of plant derived products which have high carbohydrate content such as agricultural commodities and their products are most vulnerable to contamination by aflatoxins.

• Journal of the Korea Society for Simulation
• /
• v.28 no.3
• /
• pp.25-40
• /
• 2019

Today, container terminals are fiercely competing to attract an increasing number of containers. As a way to improve terminal productivity, this study proposes two dispatching rules for yard truck allocation priorities. First, Multi-Attribute Dispatching Rule(MADR) is an allocation method to calculate the weighted sum of multiple factors affecting container terminal productivity and priority them. Especially, the workload of the quay crane was considered one of the factors to reduce the residence time of the ship. Second, Cycling Dispatching Rule(CDR) is the effective way to increase the number of double cycles that directly affect terminal productivity. To identify the effects of combinations of pooling and dispatching, a comparative experiments was performed on 8 scenarios that combined them. A simulation environment has been developed for experiments and the results have demonstrated that the combination of terminal level pooling and Multi-attribute Dispatching could be an excellent combination in KPIs consisting of GCR and delayed departure of ships, etc.

• Journal of Fashion Business
• /
• v.28 no.2
• /
• pp.125-138
• /
• 2024

The purpose of this study is to develop and implement a step-by-step upcycling fashion education program that can be utilized within the local community. This program aims to provide basic data by analyzing the current state of community-based upcycling projects and upcycling center programs. To achieve this, the study first examined the meaning and value of upcycling in fashion through literature research and explored upcycling projects and programs in connection with local communities. Subsequently, an upcycling fashion education program platform was developed and applied using the design thinking process. The program involved students from nine high schools in Gwangju Metropolitan City. Depending on the school's circumstances, the time and difficulty level of the upcycling education program were adjusted accordingly. A unique eco-bag making kit, using jeans developed in this study, was employed. Following the completion of the program, a satisfaction survey was conducted among 167 participating students from the high school community class. The findings indicated that the majority of students experienced an increased appreciation, attraction, and interest in upcycling products. They also demonstrated an understanding of the environmental impact of upcycling products and the distinction between upcycling and recycling. It is believed that the educational program developed in this study can promote ethical fashion and foster a sense of value-based consumption. This program can be customized and flexibly adapted to different educational levels and institutional characteristics, making it accessible to a wide range of learners.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.179-180
• /
• 2010

The literature of present study was performed with content of chloride by total 6 level. After casting, and then, to measure the results of corrosion in a quick time used accelerated method of corrosion during 20 weeks. Both Galvanic and Half-cell for 20 weeks was used to model the initial time to corrosion, and then current of corrosion was measured by using Linear polarization at the end of cycling. The processing of steel used in concrete is same way as the case of mortar and also the initial time of corrosion was measured.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.04a
• /
• pp.216-217
• /
• 2015

Duty-cycling could efficiently prolong the life time of Wireless Sensor Networks (WSNs) by let nodes be in dormant state most of the time, and only wake up (for sending or receiving) for a very short period. Flooding is one critical operation of WSNs. Many studies have been studied to improve the delay and/or energy efficiency of flooding. In this paper, we propose a novel time slot design, and the switching decision that reduce energy consumption for the schedule-based flooding tree. Each node, if failed to receive from its parent, will look for other candidate, among its siblings to overhear the flooding packet. By accurately collect information from other siblings, each node can make the best as possible switching decision; therefore the energy efficiency of the network is improved.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.3
• /
• pp.161-166
• /
• 2006

In this paper, CPLD low power technology mapping using reuse module selection under the time constraint is proposed. Traditional high-level synthesis do not allow reuse of complex, realistic datapath component during the task of scheduling. On the other hand, the proposed algorithm is able to approach a productivity of the design the low power to reuse which given a library of user-defined datapath component and to share of resource sharing on the switching activity in a shared resource Also, we are obtainable the optimal the scheduling result in experimental results of our using chaining and multi-cycling in the scheduling techniques. Low power circuit make using CPLD technology mapping algorithm for selection reuse module by scheduling.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3617-3627
• /
• 2023

This study presents a method to solidify spent ion-exchange resin (IER) in a metakaolin-based geopolymer and shows results of mechanical strength, immersion, leaching, irradiation, and thermal cycling tests for waste acceptance criteria (WAC) to repository. The geopolymer waste form with 20 wt% of simulated spent IER met the WAC in South Korea (ROK), and the leaching tests of various sized-waste forms up to 15.0 × 30.0 cm and waste loadings up to 20 wt% for 1-5 d and 1-90 d achieved a leachability index, L_i > 6. In a leaching test for 5 d, the cumulative fraction leached (CFL) for Cs, which leached the most, was linearly correlated with the square root of leaching time for all waste forms, and L_i increased as the size of the waste form increased. The CFL was also correlated with elapsed time in the 90 d leaching test. The correlations among CFL, time, and volume-to-surface area ratio of waste forms used to estimate the L_i of Cs of a 200-L sized geopolymer with 15 wt% IER showed the L_i values as 14.73 (5 d) and 17.71 (90 d), respectively, indicating that the large-sized geopolymer waste form met the WAC.