• 제목/요약/키워드: Cyclic-Curve

검색결과 305건 처리시간 0.027초

아연계 인산염 피막용액에서 Fe(NO3)2 농도가 SCM430 합금의 전기화학적 거동에 미치는 영향 (Effect of Fe(NO3)2 Concentration on Electrochemical Behavior of SCM430 in Zinc Phosphate Conversion Coating Solution)

  • 권두영;송풍근;문성모
    • 한국표면공학회지
    • /
    • 제52권4호
    • /
    • pp.233-238
    • /
    • 2019
  • The formation behavior of zinc phosphate conversion coating (ZPCC) on SCM430 alloy was investigated in 25 vol.% of 1M ZnO + 170 ml/L solution containing various $Fe(NO_3)_2$ concentrations, using open-circuit potential(OCP), electrochemical impedance spectroscopy(EIS), cyclic polarization(CP) curve and tape peel test. OCP of SCM430 alloy and corrosion current density increased with increasing $Fe(NO_3)_3$ concentration. Resistance of films formed on SCM430 alloy by chemical conversion treatment decreased with increasing $Fe(NO_3)_3$ concentration. Color and adhesion of chemical conversion coatings became darker and worse, respectively, with increasing $Fe(NO_3)_3$ concentration. It is concluded that addition of $Fe(NO_3)_3$ into a zinc phosphating bath leads to faster reaction to form porous surface coatings with poor adhesion and corrosion resistance.

Analysis of Cu in Mezcal Commercial Samples using Square Wave Anodic Stripping Voltammetry

  • Salinas, Gerardo;Ibanez, Jorge G.;Vasquez-Medrano, Ruben;Frontana-Uribe, Bernardo A.
    • Journal of Electrochemical Science and Technology
    • /
    • 제9권4호
    • /
    • pp.276-281
    • /
    • 2018
  • High concentration of copper in mezcal, a representative Mexican spirituous alcoholic beverage, is a serious problem due to the damage that it may cause to human health. A cyclic voltammetry and square wave anodic stripping voltammetry study of copper (II) in three commercial mezcal samples based on glassy carbon electrode response was undertaken. The analysis was developed using a simulated matrix solution ($EtOH/H_2O$ (1:1), 0.1 M $LiClO_4$ and AcOH/AcONa 0.05 M/0.008 M), with Cu (II) concentrations in the range 0 - 1 ppm. Direct electrochemical analysis of mezcal samples was complicated by the presence of different organic compounds in the matrix. The analytical signal of Cu (II) in the spirituous was notably improved and the interferences caused by organic compounds were minimized, by diluting the mezcal samples 10% with $EtOH/H_2O$ (1:1) solution. An efficient quantification of Cu (II) was obtained from the calibration curve by the SWASV and using the internal standard method (Cd (II)) in commercial samples (1.2-6.7 ppm); the results were correlated satisfactorily with the values obtained by AAS.

New Light Curves and Orbital Period Investigations of the Interacting Binary System UV Piscium

  • Jeong, Min-Ji;Han, Wonyong;Kim, Chun-Hwey;Yoon, Joh-Na;Kim, Hyoun-Woo
    • Journal of Astronomy and Space Sciences
    • /
    • 제36권2호
    • /
    • pp.75-86
    • /
    • 2019
  • UV Psc is a typical RS CVn type system undergoing dynamic chromosphere activity. We performed photometric observations of the system in 2015 and secured new BVR light curves showing well-defined photometric waves. In this paper, we analyzed the light curves using Wilson-Devinney binary code and investigated the orbital period of the system. The combination of our light curve synthesis with the spectroscopic solution developed by previous investigators yielded the absolute parameters as: $M_1=1.104{\pm}0.042M_{\odot}$, $R_1=1.165{\pm}0.025R_{\odot}$, and $L_1=1.361{\pm} 0.041L_{\odot}$ for the primary star, and $M_2=0.809{\pm}0.082M_{\odot}$, $R_2=0.858{\pm}0.018R_{\odot}$, and $L_2=0.339 {\pm}0.010L_{\odot}$ for the secondary star. The eclipse timing diagram for accurate CCD and photoelectric timings showed that the orbital period may vary either in a downward parabolic manner or a quasi-sinusoidal pattern. If the latter is adopted as a probable pattern for the period change, a more plausible account for the cyclic variation may be the light time effect caused by a circumbinary object rather than an Applegate-mechanism occurring via variable surface magnetic field strengths.

Hysteretic performance of a novel composite wall panel consisted of a light-steel frame and aerated concrete blocks

  • Wang, Xiaoping;Li, Fan;Wan, Liangdong;Li, Tao
    • Steel and Composite Structures
    • /
    • 제41권6호
    • /
    • pp.861-871
    • /
    • 2021
  • This study aims at investigating the hysteretic performance of a novel composite wall panel fabricated by infilling aerated concrete blocks into a novel light-steel frame used for low-rise residential buildings. The novel light-steel frame is consisted of two thin-wall rectangular hollow section columns and a truss-beam assembled using patented U-shape connectors. Two bare light-steel frames and two composite wall panels have been tested to failure under horizontal cyclic loading. Hysteretic curves, lateral resistance and stiffness of four specimens have been investigated and analyzed. Based on the testing results, it is found that the masonry infill can significantly increase the lateral resistance and stiffness of the novel light-steel frame, about 2.3~3 and 21.2~31.5 times, respectively. Failure mode of the light-steel frame is local yielding of the column. For the composite wall panel, firstly, masonry infill is crushed, subsequently, local yielding may occur at the column if loading continues. Hysteretic curve of the composite wall panel obtained is not plump, implying a poor energy dissipation capacity. However, the light-steel frame of the composite wall panel can dissipate more energy after the masonry infill is crushed. Therefore, the composite wall panel has a much higher energy dissipation capacity compared to the bare light-steel frame.

Seismic assessment of Nitinol Belleville Elastic Nonlinear (NI-BELL-E-N) structural system

  • Hadad, Alireza Asgari;Shahrooz, Bahram M
    • Steel and Composite Structures
    • /
    • 제43권3호
    • /
    • pp.375-388
    • /
    • 2022
  • Nibellen structural system is a novel resilient bracing system based on the application of Bellville disks and Nitinol rods. The cyclic behavior of Nibellen assembly was obtained, and the design equations were developed based on the available literature. Seismic performance of the system was then studied analytically. Two groups of buildings with different lateral force resisting systems were designed and studied: one group with the Nibellen system, and the other with the special concentrically braced frame system. Each building group consisted of 5-, 10-, and 15-story buildings. The Design-Base-Event (DBE) and Maximum Considered Event (MCE) were considered as the seismic hazard, and a suite of seven ground motions were scaled accordingly for response history analyses. Finally, the resiliency of the buildings was studied by obtaining the functionality curve of the buildings before and after the seismic event. The construction cost of the 5-story building with Nibellen bracing system increased but the post-earthquake cost decreased significantly. The application of Nibellen system in the 10- and 15-story buildings reduced both the construction and repair costs, considerably. Resiliency of all the buildings was improved when Nibellen system was used as the lateral force resisting system.

Fatigue Properties of Ti-Ni Shape Memory Alloy Wire Welded by Nd: YAG Laser

  • Kim, Y.S.;Kim, J.D.;Kil, B.L.
    • International Journal of Korean Welding Society
    • /
    • 제3권1호
    • /
    • pp.39-44
    • /
    • 2003
  • The welded specimens were made by butt welding of the 2 wires of 50mm length using the pulsed YAG laser. The laser welded wires were tested for investigating the shape memory effect and the ability of super elasticity. The fatigue properties of the welded wires were investigated using the rotary bending fatigue tester specially designed for wires. Moreover, the effect of defocusing distance during laser welding on the static and fatigue properties was Investigated. The shape memory effect and super elasticity of the laser welded wires were approximately identical with that of base metal at the test temperature below 353K. However, the welded wires were broken within elastic limit at the test temperature above 353k. Under the cyclic bending loading conditions, the welded wires could be useful only below the elastic limit, while the base metal had sufficient fatigue life even the stress induced M-phase region. The fatigue strength of the welded wires was about half of that of the base metal. The deterioration of the static and fatigue properties in the welded wires was proven to be from the large difference of the transformation behavior between the base metal and welded part that is caused by vaporization of Ni-content at the welded part during the welding process. The defocusing distance below 3mm acted more largely on lowering the strength of the welded wires than that of 6mm or 8mm.

  • PDF

Experimental seismic behavior of RC special-shaped column to steel beam connections with steel jacket

  • Hao, Jiashu;Ren, Qingying;Li, Xingqian;Zhang, Xizhi;Ding, Yongjun;Zhang, Shaohua
    • Steel and Composite Structures
    • /
    • 제45권1호
    • /
    • pp.101-118
    • /
    • 2022
  • The seismic performance of the reinforced concrete (RC) special-shaped column to steel beam connections with steel jacket used in the RC column to steel beam fabricated frame structures was investigated in this study. The three full-scale specimens were subjected to cyclic loading. The failure mode, ultimate bearing capacity, shear strength capacity, stiffness degradation, energy dissipation capacity, and strain distribution of the specimens were studied by varying the steel jacket thickness parameters. Test results indicate that the RC special-shaped column to steel beam connection with steel jacket is reliable and has excellent seismic performance. The hysteresis curve is full and has excellent energy dissipation capacity. The thickness of the steel jacket is an important parameter affecting the seismic performance of the proposed connections, and the shear strength capacity, ductility, and initial stiffness of the specimens improve with the increase in the thickness of the steel jacket. The calculation formula for the shear strength capacity of RC special-shaped column to steel beam connections with steel jacket is proposed on the basis of the experimental results and numerical simulation analysis. The theoretical values of the formula are in good agreement with the experimental values.

정현하중재하 진동삼축시험에 기초한 포화사질토의 액상화 한계저항특성 (A Critical Liquefaction Resistible Characteristic of Saturated Sands Based on the Cyclic Triaxial Test Under Sinusoidal Loadings)

  • 최재순;김수일
    • 한국지반공학회논문집
    • /
    • 제20권8호
    • /
    • pp.147-158
    • /
    • 2004
  • 국내 액상화 상세평가에 관한 시방내용을 살펴보면, 지진을 정현하중으로 고려한 등가전단응력개념에 기초하여 전단응력을 달리한 3회 이상의 액상화 발생 실내진동시험을 수행하고 이를 토대로 액상화 저항응력비 곡선을 도시하여 지진규모별로 적용할 것을 명시하고 있다. 즉, 현행 액상화 상세평가에서는 실내진동시험결과인 응력, 변형률, 과잉간극수압, 유효응력, 응력 경괴의 변화 등의 다양한 결과들을 효과적으로 이용하지 못하고 최대전단응력과 액상화 발생시 진동재하횟수라는 단순한 시험결과만을 이용하여 액상화 평가를 수행한다. 본 연구에서는 현행 액상화 상세평가에서의 단순한 시험결과의 이용을 탈피하여 응력, 변형률, 그리고, 과잉간극수압 시간이력들과 응력-변형률 상관관계 및 유효응력경로 등의 다양한 실내진동시험 결과를 토대로 액상화 발생메카니즘을 포함한 지반의 동적저항상태를 분석하였다. 특히, 과잉간극수압의 영향을 고려한 동적 유효응력경로가 지반의 동적거동을 효과적으로 구분하여 나타낼 수 있는 점을 발견하고 이를 토대로 지반의 동적상태를 점진적 응력감소, 급진적 응력감소, 그리고 액상화 후 극한상태의 3단계로 구분하였다. 또한, 액상화 현상이 실제적으로 점진적 응력감소에서 급진적 응력감소로 전환되는 시점에서 대변형을 동반하여 발생한다는 사실을 발견하고 이를 액상화 상태전환시점으로 정의하였으며 이러한 액상화상태전환시점이 압축제하 또는 인장재제하로 하중방향이 바뀌는 시점에서 발생하는 점을 반영하여 1/4주기별 시험결과분석에 기초하여 저항특성을 나타내었다. 그리고, 본 연구를 통해 제안된 액상화 저항특성에 대한 타당성 검토를 위해 과잉간극수압으로 인해 발생하는 지반재료 내부에서 소산되는 에너지 개념과 기제안된 교란상태개념에 기초한 액상화 저항특성과 비교하였다. 연구결과, 제안된 누적 소성 전단변형률은 액상화 발생의 원인이 되는 과잉간 극수압의 영향을 합리적으로 표현하고 있을 뿐만 아니라 진동하중으로부터 소산되는 재료 내부의 에너지 변화를 신뢰성 높게 표현하고 있는 것으로 나타났다. 특히, 제안된 지반의 한계 저항특성의 경우, 기제안된 교란도 함$.$수에 기초한 수치해석방법보다 정확하게 대변형의 영향을 포함하지 않고 한계상태를 표현하고 있는 것으로 나타났다.

Sesquiterpenoids Bioconversion Analysis by Wood Rot Fungi

  • Lee, Su-Yeon;Ryu, Sun-Hwa;Choi, In-Gyu;Kim, Myungkil
    • 한국균학회소식:학술대회논문집
    • /
    • 한국균학회 2016년도 춘계학술대회 및 임시총회
    • /
    • pp.19-20
    • /
    • 2016
  • Sesquiterpenoids are defined as $C_{15}$ compounds derived from farnesyl pyrophosphate (FPP), and their complex structures are found in the tissue of many diverse plants (Degenhardt et al. 2009). FPP's long chain length and additional double bond enables its conversion to a huge range of mono-, di-, and tri-cyclic structures. A number of cyclic sesquiterpenes with alcohol, aldehyde, and ketone derivatives have key biological and medicinal properties (Fraga 1999). Fungi, such as the wood-rotting Polyporus brumalis, are excellent sources of pharmaceutically interesting natural products such as sesquiterpenoids. In this study, we investigated the biosynthesis of P. brumalis sesquiterpenoids on modified medium. Fungal suspensions of 11 white rot species were inoculated in modified medium containing $C_6H_{12}O_6$, $C_4H_{12}N_2O_6$, $KH_2PO_4$, $MgSO_4$, and $CaCl_2$ for 20 days. Cultivation was stopped by solvent extraction via separation of the mycelium. The metabolites were identified as follows: propionic acid (1), mevalonic acid lactone (2), ${\beta}$-eudesmane (3), and ${\beta}$-eudesmol (4), respectively (Figure 1). The main peaks of ${\beta}$-eudesmane and ${\beta}$-eudesmol, which were indicative of sesquiterpene structures, were consistently detected for 5, 7, 12, and 15 days These results demonstrated the existence of terpene metabolism in the mycelium of P. brumalis. Polyporus spp. are known to generate flavor components such as methyl 2,4-dihydroxy-3,6-dimethyl benzoate; 2-hydroxy-4-methoxy-6-methyl benzoic acid; 3-hydroxy-5-methyl phenol; and 3-methoxy-2,5-dimethyl phenol in submerged cultures (Hoffmann and Esser 1978). Drimanes of sesquiterpenes were reported as metabolites from P. arcularius and shown to exhibit antimicrobial activity against Gram-positive bacteria such as Staphylococcus aureus (Fleck et al. 1996). The main metabolites of P. brumalis, ${\beta}$-Eudesmol and ${\beta}$-eudesmane, were categorized as eudesmane-type sesquiterpene structures. The eudesmane skeleton could be biosynthesized from FPP-derived IPP, and approximately 1,000 structures have been identified in plants as essential oils. The biosynthesis of eudesmol from P. brumalis may thus be an important tool for the production of useful natural compounds as presumed from its identified potent bioactivity in plants. Essential oils comprising eudesmane-type sesquiterpenoids have been previously and extensively researched (Wu et al. 2006). ${\beta}$-Eudesmol is a well-known and important eudesmane alcohol with an anticholinergic effect in the vascular endothelium (Tsuneki et al. 2005). Additionally, recent studies demonstrated that ${\beta}$-eudesmol acts as a channel blocker for nicotinic acetylcholine receptors at the neuromuscular junction, and it can inhibit angiogenesis in vitro and in vivo by blocking the mitogen-activated protein kinase (MAPK) signaling pathway (Seo et al. 2011). Variation of nutrients was conducted to determine an optimum condition for the biosynthesis of sesquiterpenes by P. brumalis. Genes encoding terpene synthases, which are crucial to the terpene synthesis pathway, generally respond to environmental factors such as pH, temperature, and available nutrients (Hoffmeister and Keller 2007, Yu and Keller 2005). Calvo et al. described the effect of major nutrients, carbon and nitrogen, on the synthesis of secondary metabolites (Calvo et al. 2002). P. brumalis did not prefer to synthesize sesquiterpenes under all growth conditions. Results of differences in metabolites observed in P. brumalis grown in PDB and modified medium highlighted the potential effect inorganic sources such as $C_4H_{12}N_2O_6$, $KH_2PO_4$, $MgSO_4$, and $CaCl_2$ on sesquiterpene synthesis. ${\beta}$-eudesmol was apparent during cultivation except for when P. brumalis was grown on $MgSO_4$-free medium. These results demonstrated that $MgSO_4$ can specifically control the biosynthesis of ${\beta}$-eudesmol. Magnesium has been reported as a cofactor that binds to sesquiterpene synthase (Agger et al. 2008). Specifically, the $Mg^{2+}$ ions bind to two conserved metal-binding motifs. These metal ions complex to the substrate pyrophosphate, thereby promoting the ionization of the leaving groups of FPP and resulting in the generation of a highly reactive allylic cation. Effect of magnesium source on the sesquiterpene biosynthesis was also identified via analysis of the concentration of total carbohydrates. Our current study offered further insight that fungal sesquiterpene biosynthesis can be controlled by nutrients. To profile the metabolites of P. brumalis, the cultures were extracted based on the growth curve. Despite metabolites produced during mycelia growth, there was difficulty in detecting significant changes in metabolite production, especially those at low concentrations. These compounds may be of interest in understanding their synthetic mechanisms in P. brumalis. The synthesis of terpene compounds began during the growth phase at day 9. Sesquiterpene synthesis occurred after growth was complete. At day 9, drimenol, farnesol, and mevalonic lactone (or mevalonic acid lactone) were identified. Mevalonic acid lactone is the precursor of the mevalonic pathway, and particularly, it is a precursor for a number of biologically important lipids, including cholesterol hormones (Buckley et al. 2002). Farnesol is the precursor of sesquiterpenoids. Drimenol compounds, bi-cyclic-sesquiterpene alcohols, can be synthesized from trans-trans farnesol via cyclization and rearrangement (Polovinka et al. 1994). They have also been identified in the basidiomycota Lentinus lepideus as secondary metabolites. After 12 days in the growth phase, ${\beta}$-elemene caryophyllene, ${\delta}$-cadiene, and eudesmane were detected with ${\beta}$-eudesmol. The data showed the synthesis of sesquiterpene hydrocarbons with bi-cyclic structures. These compounds can be synthesized from FPP by cyclization. Cyclic terpenoids are synthesized through the formation of a carbon skeleton from linear precursors by terpene cyclase, which is followed by chemical modification by oxidation, reduction, methylation, etc. Sesquiterpene cyclase is a key branch-point enzyme that catalyzes the complex intermolecular cyclization of the linear prenyl diphosphate into cyclic hydrocarbons (Toyomasu et al. 2007). After 20 days in stationary phase, the oxygenated structures eudesmol, elemol, and caryophyllene oxide were detected. Thus, after growth, sesquiterpenes were identified. Per these results, we showed that terpene metabolism in wood-rotting fungi occurs in the stationary phase. We also showed that such metabolism can be controlled by magnesium supplementation in the growth medium. In conclusion, we identified P. brumalis as a wood-rotting fungus that can produce sesquiterpenes. To mechanistically understand eudesmane-type sesquiterpene biosynthesis in P. brumalis, further research into the genes regulating the dynamics of such biosynthesis is warranted.

  • PDF

세로토닌 재흡수억제제의 약리학과 임상적용 (The Pharmacology and the Clinical Use of Selective Serotonin Reuptake Inhibitors)

  • 이민수;김표한
    • 생물정신의학
    • /
    • 제2권2호
    • /
    • pp.205-217
    • /
    • 1995
  • 1) Paroxetine이 5-HT흡수에 가장 강력하고, 선택적이었으며, 그 다음이 fluvoxamine, sertraline, fluoxetine순이었고, sertraline은 다른 SSRIs와는 달리 NE보다 DA억제작용이 더 강했다. 2) Paroxetine이 muscarinic cholinergic 수용체에 대한 친화력이 다소 높았을 뿐, 전반적으로 SSRIs는 histamine $H_1$${\alpha}_1$에 대한 친화력은 약했다. 3) Paroxetine은 ${\beta}$-adrenoceptor와 cyclic AMP에 영향을 미치지 않는 반면, sertraline은 ${\beta}$-adrenoceptor와 cyclic AMP의 감소를 가져왔다. 4) SSRIs의 생체이용율은 대략 50%이었으며, 투약후 2~8시간 사이에 최고혈중농도에 도달하였으며, 특히 sertraline은 음식물과 같이 복용시 혈장의 concentration time curve와 최고 농도를 증가시켰다. 5) Sertraline은 혈중농도가 용량에 비례하였으며, 모든 SSRIs는 비교적 큰 용량분포를 보이고, 높은 비율로 혈장 단백질과 결합되어 있었다. 6) Fluoxetine 대사물의 5-HT 억제 작용이 제일 강했다. 그러나 paroxetine, fluoxetine, sertraline 대사물은 강도는 서로 다르지만 간의 isoenzyme IID6를 억제하며, 그 중에서 paroxetine의 억제작용이 제일 강력하다. 7) Sertraline은 TCAs나 haloperidol과 병합사용시 TCAs나 haloperidol의 혈중농도의 유의한 변화가 없었으며, MAOI A형인 moclobemide와 비교적 안전하게 병용 치료할 수 있다. 8) SSRIs는 TCAs와 비교해볼 때 치료효과는 유사하였으나 fluvoxamine은 자살사고에, paroxetine은 우울중에서 나타나는 불안과 운동성 초조증에 효과적이다. 9) 급성 우울증 삽화시 현저한 효과를 보인 후 적어도 4개월 이상의 유지치료기간이 필요하다. 10) SSRIs는 위장관계통의 부작용이 가장 많았고, 부작용은 일반적으로 분복한 경우가 적었다.

  • PDF