• Journal of Environmental Science International
• /
• v.33 no.5
• /
• pp.323-332
• /
• 2024

Circulating hydroponic cultivation has the advantage of reducing soil and water pollution problems caused by discharge of fertilizer components because the nutrient solution is reused. However, cyclic hydroponic cultivation has a low biological buffering capacity and can cause outbreaks of infectious root pathogens. Therefore, it is necessary to develop technologies or disinfection systems to control them. This study used dielectric barrier discharge plasma, which generates various persistent oxidants, to treat Fusarium oxysporum f. sp., a pathogen that causes wilt disease. Batch and intermittent continuous inactivation experiments were conducted, and the results showed that the total residual oxidant was persistent in intermittent plasma treatment at intervals of 2-3 days, and F. oxysporum was treated efficiently. Intermittent plasma treatment did not inhibit the growth of tomatoes.

• Korean Journal of Microbiology
• /
• v.31 no.1
• /
• pp.72-78
• /
• 1993

Since the 'promoter/enhancer region of the major immediate early (IE) ~ene of human cytomegalovirus (HCMV) contains the cyclic AMP (cAMP) response element (CRE) consensus sequence, it was reasonable to hypothesize that cAMP might affect HCMV replication. Cyclic AMP modulating drugs such as 8-bromoadenosine 3',5'-cyclic monophosphate (BrA), and papaverine were used to affect the intracellular levels of cAMP, and the effects of the drugs on HCMV replication were studied. While papaverine effectively inhibited HCMV multiplication and DNA synthesis, BrA exerted little effect on the production of infectious HCMV yields. The synthesis of DNA in HCMV-infected cells appeared to be stimulated by BrA In order to understand the effect of cAMP on the expression of HCMV major IE gene, plasmid (pCMVIE/CAT) containing a reporter gene driven by HCMV IE promoter was transfected into either permissive human embryo lung (HEL) cells or nonpermissive cells. PL,Javerine, which has been reported to block the HCMV-induced increase in cAMP, reduced the expression of pCMVIE/CA T in permissive HEL cells. Treatment of transfected cells with BrA increased the expression of HCMV major IE promoter not only in HEL cells, but also in nonpermissive HeLa and Vero cells. Therefore, it seems that the expression of HCMV major IE gene is regulated by cAMP.

• Restorative Dentistry and Endodontics
• /
• v.43 no.2
• /
• pp.25.1-25.10
• /
• 2018

Objectives: To evaluate the mechanical properties and metallurgical characteristics of the M3 Rotary and M3 Pro Gold files (United Dental). Materials and Methods: One hundred and sixty new M3 Rotary and M3 Pro Gold files (sizes 20/0.04 and 25/0.04) were used. Torque and angle of rotation at failure (n = 20) were measured according to ISO 3630-1. Cyclic fatigue resistance was tested by measuring the number of cycles to failure in an artificial stainless steel canal ($60^{\circ}$ angle of curvature and a 5-mm radius). The metallurgical characteristics were investigated by differential scanning calorimetry. Data were analyzed using analysis of variance and the Student-Newman-Keuls test. Results: Comparing the same size of the 2 different instruments, cyclic fatigue resistance was significantly higher in the M3 Pro Gold files than in the M3 Rotary files (p < 0.001). No significant difference was observed between the files in the maximum torque load, while a significantly higher angular rotation to fracture was observed for M3 Pro Gold (p < 0.05). In the DSC analysis, the M3 Pro Gold files showed one prominent peak on the heating curve and 2 prominent peaks on the cooling curve. In contrast, the M3 Rotary files showed 1 small peak on the heating curve and 1 small peak on the cooling curve. Conclusions: The M3 Pro Gold files showed greater flexibility and angular rotation than the M3 Rotary files, without decrement of their torque resistance. The superior flexibility of M3 Pro Gold files can be attributed to their martensite phase.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.3
• /
• pp.157-163
• /
• 2006

This paper described the process of improving durability performance of the exhaust decoupler by the plasma nitriding. The properties of plasma nitriding treatment of AIS1304 stainless steel were tested using specimens before applying plasma nitriding to a mesh ring. In order to analyses the effect of plasma nitriding treatment on the mechanical properties, SEM(Scanning Electron Microscopes), roughness and hardness tester were used. Based on specimen plasma nitriding, we could find appropriate condition for application to the mesh ring of decoupler. To confirm the improved durability performance, we compared the number of cycles, which reaches to fracture, of the nitrided decoupler and that of the unnitrided decoupler by the bending cyclic test. In this test, the durability and wear resistance of the mesh ring are significantly improved by plasma nitriding treatment.

• YAKHAK HOEJI
• /
• v.51 no.1
• /
• pp.35-43
• /
• 2007

To investigate the immunomodulatory roles of cyclic AMP (CAMP) on macrophage- and T lymphocyte-mediated immune responses, CAMP elevating agents were employed and carefully re-examined under the activation conditions of the cells. Various inhibitors tested dose-dependently blocked tumor necrosis factor (TNF)-${\alpha}$ production with IC$_{50}$ values ranged from 0.04 to 300 ${\mu}$M. Of the inhibitors, cAMP-elevating agents showed lower cytotoxicity assessed by lactate dehydrogenase (LDH) release, suggesting less toxic and more selective. In particular co-treatment of dbcAMP with a protein kinase C inhibitor staurosporine displayed the synergistic inhibition of TNF-${\alpha}$ production. The modulatory effect of dbcAMP on TNF-${\alpha}$ and nitric oxide (NO) was significantly affected by treatment time of dbcAMP. Thus, post-treatment of dbcAMP (three hours before LPS) abrogated dbcAMP's inhibitory activity and rather enhanced TNF-${\alpha}$ level up to 60%. In contrast, additional NO production was shown at the co-treatment of dbcAMP with LPS. Unlike simultaneous treatment of phorbol 12-myristate 13-acetate (PMA) and interferon (IFN)-${\gamma}$co-treatment, the combination of dbcAMP with other NO-inducing stimuli did not show drastic overproduction of NO. cAMP elevating agents also diminished splenocyte proliferation stimulated by concanavalin (Con) A, phytohemaglutinin A (PHA) and lipopolysaccharide (LPS). In addition, dbcAMP but not rolipram strongly suppressed CD8$^+$ T cells (CTLL-2). Finally, cAMP elevating agents were differentially involved in regulating CD98-mediated cell-cell adhesion. Thus, dbcAMP and rolipram significantly enhanced the cell-cell adhesion, whereas forskolin blocked. Therefore, our results suggest that CAMP elevating agents participate in various immune responses mediated by macrophages and T cells with a different fashion depending on cellular environments and activation signals.

• Corrosion Science and Technology
• /
• v.9 no.6
• /
• pp.310-316
• /
• 2010

Recently a fuel oil of the diesel engine of the marine ship is being changed with heavy oil of low quality as the oil price is higher more and more. Therefore the wear and corrosion in all parts of the engine such as cylinder liner, piston crown, spindle and seat ring of exhaust valves are predominantly increased. In particular the degree of wear and corrosion of piston crown is more seriously compared to the other parts of the engine due to operating in severe environment such as the high temperature of exhaust gas and repeating impact. Thus the repair weldment of the piston crown is a unique method to prolong the its life in a economical point of view. In this case, filler metals having a high corrosion and wear resistance such as stellite 6, Inconel 625 and Inconel 718 are mainly being used for repair welding. However it has been often happened that piston crown on the ship,s job site is being actually inevitably welded with mild filler metals. Therefore in this study, filler metals such as E4301, E4313 and E4316 were welded at SS401 steel as the base metal, and corrosion property of their weld metals in the case of post weld heat treatment or not was investigated with some electrochemical methods such as measurement of corrosion potential, cathodic and anodic polarization curves, cyclic voltammogram and polarization resistance etc. in 0.1% $H_2SO_4$ solution. Corrosion resistance of the weld metal of E4301 was better than the other weld metals in the case of no heat treatment, however, its resistance was considerably decreased with post weld heat treatment(annealing:$625^{\circ}C$, 2 hr) compared to other weld metals. The weld metals of E4313 and E4316 showed a relatively good corrosion resistance by post weld heat treatment.

• Clinical and Experimental Pediatrics
• /
• v.55 no.2
• /
• pp.42-47
• /
• 2012

$Mycoplasma$ $pneumoniae$ (MP), the smallest self-replicating biological system, is a common cause of upper and lower respiratory tract infections, leading to a wide range of pulmonary and extra-pulmonary manifestations. MP pneumonia has been reported in 10 to 40% of cases of community-acquired pneumonia and shows an even higher proportion during epidemics. MP infection is endemic in larger communities of the world with cyclic epidemics every 3 to 7 years. In Korea, 3 to 4-year cycles have been observed from the mid-1980s to present. Although a variety of serologic assays and polymerase chain reaction (PCR) techniques are available for the diagnosis of MP infections, early diagnosis of MP pneumonia is limited by the lack of immunoglobulin (Ig) M antibodies and variable PCR results in the early stages of the infection. Thus, short-term paired IgM serologic tests may be mandatory for an early and definitive diagnosis. MP infection is usually a mild and self-limiting disease without specific treatment, and if needed, macrolides are generally used as a first-choice drug for children. Recently, macrolide-resistant MP strains have been reported worldwide. However, there are few reports of apparent treatment failure, such as progression of pneumonia to acute respiratory distress syndrome despite macrolide treatment. The immunopathogenesis of MP pneumonia is believed to be a hyperimmune reaction of the host to the insults from MP infection, including cytokine overproduction and immune cell activation (T cells). In this context, immunomodulatory treatment (corticosteroids or/and intravenous Ig), in addition to antibiotic treatment, might be considered for patients with severe infection.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.3
• /
• pp.307-312
• /
• 2012

This study aims to investigate the effect of the post weld treatments on the fatigue life of T-type welded structure made by a SM50A steel material, generally used for excavators, because changes in the geometry, material and surface properties of welded regions affect the fatigue life of welded structures. T-type test specimens were prepared by the CO2 welding of rolled steel plates (SM50A steel) with a thickness of 10 mm at a welding speed of 30 cm/min and these Ttype welded specimens were further treated by UIT (Ultrasonic Impact Treatment) and/or toegrinding post welding treatment methods. In order to investigate improvements on the fatigue life of the samples. 3-point bending fatigue tests were conducted with a stress ratio of R=0.1 under a cyclic loading environment at a frequency of 5 Hz, via a hydraulic fatigue testing machine (${\pm}100\;kN$, MTS 809). The tests were performed at room temperature. The fatigue life of UIT specimens was approximately 25 times longer than that of as-welded specimens at a stress amplitude of 281 MPa, while toe-grinding specimens exhibited 4.15 times longer fatigue life. The current results could provide important guidelines to determine the proper post weld treatment methodologies of T-type welded parts for excavators with a satisfactory fatigue life although under severe operating conditions.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.37-43
• /
• 2008

The research attempted to develop an eco-friendly wood adhesive based on vegetable oil (soybean oil), the renewable and sustainable natural resources, using ozonification technology for the chemical structure modification. The soybean oils (SBO) were reacted with $O_3$ at the rate of 7.13 g/h for different times, 15 minutes, 30 minutes, 60 minutes, and 120 minutes. Modified chemical structure of the ozonized SBOs were examined by Fourier transform Infrared (FT-IR) spectrum. The FT-IR spectrum of SBO had an absorbance peak at $3010cm^{-1}$ that is the characteristic peak of the unsaturated double bonds. As ozone treatment time increased, the peak of the double bond was disappeared and aldehyde or carboxyl peak appeared at $1700cm^{-1}$. The dry, wet, and cyclic boiling bond strengths of the ozonized SBO mixed with polymeric diphenylmethane-4, 4-diisocyanate (pMDI) were also investigated. In the dry shear test, all strengths met constantly the standard requirement of $7.0kgf/cm^2$ (KS F3101 2006). The bond strengths gradually increased with increasing ozone treatment time. The highest strength showed at 60 minutes ozone treatment and decreased values at 120 minutes. In the cyclic boiling shear test, 30, 60 and 120 minutes exceeded the standard requirement.

• Clinical and Experimental Pediatrics
• /
• v.52 no.6
• /
• pp.633-642
• /
• 2009

Neutropenia is defined as an absolute neutrophil count (ANC) of <$1,500/{\mu}L$, and the severity of neutropenia generally can be graded as mild ($1,000-1,500/{\mu}L$), moderate ($500-1,000/{\mu}L$), or severe (<500/$\mu{L}$). This stratification aids in predicting the risk of pyogenic infection because the susceptibility to life-threatening infections is significantly increased in patients with prolonged episodes of severe neutropenia. Especially cancer-related neutropenia carry significant mortality. Neutropenia can develop under various conditions such as decreased bone marrow production, the sequestering of neutrophils, and increased destruction of neutrophils in the peripheral blood. Neutropenia is classified according to the etiology as congenital or acquired, with the latter further defined according to the etiology or pathology. The clinical result is increased risk for infection, which is directly proportional to the severity and duration of the neutropenia. The typical workup of neutropenia starts with a 6-week period in which complete blood counts are measured twice weekly to document the persistence of the neutropenia and whether a cyclic pattern is present. When persistent neutropenia is diagnosed and no spontaneous recovery occurs within 3 months, a more extensive evaluation is advised. Treatment is usually unnecessary for most patients with severe neutropenia, as the majority of patients have a good prognosis. However, for patients who have severe and frequent infections, treatment with filgrastim may prevent infectious complications and improve quality of life.