• 콘크리트학회논문집
• /
• 제14권2호
• /
• pp.239-248
• /
• 2002

철근 콘크리트 면부재의 주기거동을 나타내기 위하여 소성모델과 손상모델의 통합구성모델을 개발하였다. 인장-압축을 받는 콘크리트의 응력은 개념적으로 콘크리트의 스트럿 작용에 의한 압축응력과 인장균열에 의한 인장응력의 합으로 정의하였다. 인장균열의 비등방손상에 의하여 영향을 받는 압축파괴의 등방손상을 나타내기 위하여 다중파괴기준을 갖는 소성모델을 사용하였으며, 다중균열 방향에서 인장응력-변형률 관계를 나타내기 위하여 다중고정균열손상모델과 인장균열의 소성유동모델의 개념을 사용하였다. 이러한 통합모델은 주기 인장-압축 상태의 철근 콘크리트의 거동측성, 즉 다중 인장균열 방향, 점진적으로 회전하는 균열 손상, 콘크리트의 압축파괴를 나타낼 수 있다. 제안된 구성모델은 유한요소해석에 적용되었으며, 주기하중을 받는 철근 콘크리트 전단패널 및 전단벽에 대한 기존의 실험결과들과의 비교를 통해 검증되었다.

• Advances in materials Research
• /
• 제3권3호
• /
• pp.163-174
• /
• 2014

In this study, fatigue properties and crack growth characteristics of a polycarbonate (PC) were examined during cyclic loading at various mean stress (${\sigma}_{amp}$) and stress amplitude (${\sigma}_{mean}$) conditions. Different S vs. N and da/dN vs. ${\Delta}K$ relations were obtained depending on the loading condition. The higher fatigue strength and the higher resistance of crack growth are seen for the PC samples cyclically loaded at the higher mean stress and lower stress amplitude due to the low crack driving force. Non-linear S - N relationship was detected in the examination of the fatigue properties with changing the mean stress. This is attributed to the different crack growth rate (longer fatigue life): the sample loaded at the high mean stress with lower stress amplitude. Even if the higher stress amplitude, the low fatigue properties are obtained for the sample loaded at the higher mean stress. This was due to the accumulated strain energy to the sample, where severe plastic deformation occurs instead of crack growth (plasticity-induced crack closure). Shear bands and discontinuous crack growth band (DGB) are observed clearly on the fracture surfaces of the sample cyclically loaded at the high stress amplitude, where the lower the ${\sigma}_{mean}$, the narrower the shear band and DGB. On the other hand, final fracture occurred instantly immediately after the short crack growth occurs in the PC sample loaded at the high mean with the low ${\sigma}_{amp}$, i.e., tear fracture, in which the shear bands and DGB are not seen clearly.

• 한국지반공학회논문집
• /
• 제28권7호
• /
• pp.31-40
• /
• 2012

토질분류법에서 흙은 크게 사질토와 점성토로 분류되며, 실제 설계에서도 이와 같이 분류된 흙 종류에 따라 다른 예측식을 사용하여 흙의 거동을 평가하고 있다. 그러나, 모래-세립분 혼합토는 전형적으로 중간토(intermediate soil or transitional soil)로 구분되어 모래와 점토의 중간적인 성질을 나타내기 때문에, 이러한 혼합토에 대한 거동특성을 평가할 수 있는 기준이 필요하다. 본 논문에서는 입도분포를 조정한 특정 모래에 세 가지 종류의 세립분으로 구성된 다양한 세립분함유율을 갖는 시료를 대상으로 일련의 반복 삼축압축시험을 수행하였다. 모래가 골격을 이루는 간극비(골격간극비)를 고려하여, Silica sand와 세립분(Iwakuni natural clay, Tottori silt, kaolinite)을 다양한 건조 중량비로 혼합하여 그 특성을 파악하였으며, 실험결과로 전환 세립분함유율(threshold fines content)을 넘지 않는 혼합토의 반복전단강도를 세립분 함유율 증가에 따라 평가하였다. 그 결과, 반복 전단응력비는 세립분 함유율 증가에 따라 조밀한 시료에서는 감소, 느슨한 시료에서는 증가하는 결과를 나타냈으며, 혼합토의 반복전단응력비를 등가골격간극비의 개념을 이용하여 평가했다.

• 대한치과보철학회지
• /
• 제32권1호
• /
• pp.47-76
• /
• 1994

This study was carried out to evaluate the effect of the crack propagation characteristics and bond stress of ceramo-metal system. In order to characterize the crack propagation, the static crack propagation stored in $37^{\circ}C$ distilled water of two commerical porcelains and the dynamic crack propagation under cyclic flexure load of ceramo-metal system were examined. In order to characterize the bond stress, the shear bond test, the 3-point flexure bond test, and the finite element stress analysis of ceramo-metal system were conducted. The results obtained were as follows : 1. Bulk densities and Young's moduli of opaque porcelains increased with repeated firing. 2. Maximum fracture toughness during 4 firing cycles showed at the group of 4 firing cycles in Ceramco porcelain and 2 firing cycles in Vita porcelain. 3. Shear bond strength and flexure bond strength of Ceramco-Verabond specimen were larger than those of Ceramco-Degudent G specimen (p<0.05). 4. Interfacial stresses under three point flexure bond test were concentrated at the edges of ceramometal system. 5. When a cyclic flexure load was applied, the crack growth rate of porcelain surface of ceramometal specimens was decreased as load cycles increased.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.234-237
• /
• 2006

A series of three shear wall specimens was tested under constant axial stress and reversed cyclic lateral loading in order to evaluate the seismic retrofit that had been proposed for the shear wall with the opening induced by remodeling. One of these specimens was tested in the as-built condition and the other two were retrofitted prior to testing. The retrofit involved the use of carbon fiber sheets and steel plates (thickness of 3mm) over the entire face of the wall. The test results show that the ultimate failure modes of the specimens were found to be shear fracture of the wall around the opening and two difference types of retrofitting strategy make the different effects of a rise in the strength of each specimen.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.333-336
• /
• 2006

The response of a reinforced concrete element under cyclic shear is characterized by the hysteretic loops of the shear stress-strain curves. Recent tests have shown that the orientation of steel grids in RC shear elements has a strong effect on the "pinching effect" and ductility in the post-yield hysteretic loops. In this paper, four RC elements are considered to study the effect of the steel grid orientation on "pinching effect" and ductility. The presence and absence of the pinching mechanism in the post-yield shear hysteretic loops are studied using the Rotating Angle Softened Truss Model (RA-STM) theory.

• 한국공간구조학회논문집
• /
• 제24권1호
• /
• pp.37-45
• /
• 2024

Steel plate shear walls (SPSWs) have been recognized as an effective seismic-force resisting systems due to their excellent strength and stiffness characteristics. The infill steel plate in a SPSW is constrained by a boundary frame consisting of vertical and horizontal structural members. The main purpose of this study was to investigate deformation modes and hysteretic characteristics of steel plate shear walls (SPSWs) to consider the effects of their aspect ratios and width-to-thicness ratios. The finite element model (FEM) was establish in order to simulate cyclic responses of SPSWs which have the two-side clamped boundary condition and made of conventional steel grade. The stress distribution obtained from the FEA results demonstrated that the principal stresses on steel plate with large thickness-to-width ratio were more uniformly distributed along its horizontal cross section due to the formation of multiple struts.

• Structural Engineering and Mechanics
• /
• 제5권6호
• /
• pp.743-754
• /
• 1997

A three-dimensional constitutive modeling for reinforced concrete is presented for finite element nonlinear analysis of reinforced concrete. The targets of interest to the authors are columns confined by lateral steel hoops, RC thin shells subjected to combined in-plane and out-of-plane actions and massive structures of three-dimensional (3D) extent in shear. The elasto-plastic and continuum fracture law is applied to pre-cracked solid concrete. For post cracking formulation, fixed multi-directional smeared crack model is adopted for RC domains of 3D geometry subjected to monotonic and reversed cyclic actions. The authors propose a new scheme of decomposing stress strain fields into sub-planes on which 2D constitutive laws can be applied. The proposed model for 3D reinforced concrete is experimentally verified in both member and structural levels under cyclic actions.

• Advances in concrete construction
• /
• 제2권1호
• /
• pp.1-11
• /
• 2014

This paper demonstrates an experimental study to evaluate the effects of environmental exposures on the bond between ribbed Glass Fiber Reinforced Polymer (GFRP) reinforcing bars and concrete. The equation recommended by ACI 440-1R-06, for the bond stress,was evaluated in this study. A total of 16 pullout samples, 12with GFRP bars and 4with steel bars, were exposed to two different harsh environments for different periods of time. The exposed harsh environments included direct sun exposure and cyclic splash zone sea water. The variation in the shear (bond) strengths before and after exposure was considered as a measure of the durability of the bond between GFRP bars and concrete.Experimental results showed there is no significant difference of the bond strength between 60 and 90 days of exposures.It also showed that the empirical equation of the bond stress calculated by ACI 440-IR-06 is very conservative.

• 한국재료학회지
• /
• 제7권3호
• /
• pp.224-228
• /
• 1997

2종류의 질화규소에 대하여 Ring형시험편을 이용하여 접촉피로시험을 하였다. 질화규소는 금속재료에서와 같은 형태의 피로현상을 나타냈고, 파면해석 및 관찰결과 접촉피로에 있어서 균열의 발생은 고탄소크롬강의 경우와 같이 표면하의 반복전단응력에 의한 것으로 밝혀졌다. 그리고 시험펴 파단면에서 표면하의 Heltz전단응력의 변동이 최대로 되는 깊이의 위치에 다수의 균열이 관찰되었다.