• The Journal of Advanced Prosthodontics
• /
• 제14권2호
• /
• pp.70-77
• /
• 2022

PURPOSE. This study evaluated screw loosening and 3D crown displacement after cyclic loading of implant-supported incisor crowns cemented with original titanium bases or with three compatible, nonoriginal components. MATERIALS AND METHODS. A total of 32 dental implants were divided into four groups (n = 8 each): Group 1 used original titanium bases, while Groups 2-4 used compatible components. The reverse torque value (RTV) was evaluated prior to and after cyclic loading (1,200,000 cycles). Samples (prior to and after cyclic loading) were scanned with a microcomputed tomography (micro-CT). Preload and postload files were superimposed by 3D inspection software, and 3D crown displacement analysis was performed using root-mean-square (RMS) values. All datasets were analyzed using one-way ANOVA and Tukey's post hoc analysis. RESULTS. Significant variations were observed in the postload RTV, depending on the titanium base brand (P < .001). The mean postload RTVs were significantly higher in Groups 1 and 2 than in the other study groups. While evaluating 3D crown displacement, the lowest mean RMS value was shown in the original Group 1, with the highest RMS value occurring in Group 4. CONCLUSION. Within the limitations of this in vitro study and under the implemented conditions, it was concluded that the manufacturer brand of the titanium base significantly influenced screw loosening following the fatigue test and influenced 3D crown displacement after cyclic loading.

• 한국지반공학회논문집
• /
• 제40권3호
• /
• pp.65-75
• /
• 2024

본 연구에서는 여러 영향 인자들이 사질토의 액상화로 인한 침하에 미치는 영향을 확인하기 위해 변형률 제어조건 하에서 반복단순직접전단시험을 수행하였다. 누적 전단 변형률, 상대밀도, 반복 하중의 형태, 시료 준비 방법 등의 다양한 인자들을 선정하였으며, 지진 하중이 발생하였을 때 인자들이 지반 침하에 미치는 영향을 분석하였다. 시험 결과, 누적 전단 변형률이 낮고 상대밀도가 높은 시료에서 더 작은 부피 변형이 발생하였다. 추가적으로 반복하중의 진폭은 부피 변형에 영향을 미쳤으나, 주파수는 시료의 부피 변형에 영향을 미치지 않는다는 사실을 확인할 수 있었다. 시료 준비 방법에 따라서도 액상화에 따른 침하가 다른 양상을 보인다는 사실을 확인하였으며, 이와 같은 결과들은 향후 액상화로 인한 침하 예측을 수행할 때 기초 연구로써 의미가 있을 것으로 기대된다.

• 한국환경과학회지
• /
• 제11권5호
• /
• pp.437-443
• /
• 2002

The chemical behavior and properties of the redox state of environmental pollutants were investigated using electrochemical methods. Cyclic voltammograms were performed on the compounds to measure the variations in the redox reactions. Temperature and pH were established as influencing the redox potential and current. The electrode reactions were a mixture of quasi-reversible and irreversible Precesses, which changed according to the reaction current. Although the Co(BPA)$_2$ and Cu(BPA)$_2$ compounds were not found to dissociate in wastewater, they were very unstable(K=1.02).

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제10권S_4호
• /
• pp.173-179
• /
• 2001

The chemical behavior and properties of the redox state of environmental pollutants was investigated using electrochemical methods. The purpose was to measure the variations in the redox reaction of differential pulse polarograms and cyclic voltammograms. The results observed the influences on redox potential and current of various factors including concentration, temperature, salt, and pH. These were established factors as the effect of the redox reaction. It can be clearly recognized that the electrode reaction are from reversible to irreversible processes. Also, it was mixing with reaction current controlled.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제10권S_2호
• /
• pp.65-71
• /
• 2001

The chemical behavior and properties related to the redox state of environmental pollutants were investigated using electrochemical methods. Measurements were taken of variations in the redox potential and cyclic polarization current. The results established the influence of various factors, including concentration, temperature, salt, and pH, on the redox potential and current. These factors were determined to effect the result of the redox reaction. Optimum conditions were also established for each case. It was clearly established that the electrode reaction was from a reversible to an irreversible process, plus it was also mixing reaction current controlled.

• Structural Engineering and Mechanics
• /
• 제67권1호
• /
• pp.69-78
• /
• 2018

The study presented herein focused on the change in hysteretic force-deformation behavior of lead rubber bearings (LRBs). The material model used to idealize response of LRBs under cyclic motion is capable of representing the gradual attrition in strength of isolator unit on account of lead core heating. To identify the effect of loading history on the hysteretic response of LRBs, a typical isolator unit is subjected to cyclic motions with different velocity, amplitude and number of cycles. Furthermore, performance of an LRB isolated single degree of freedom system is studied under different seismic input levels. Finally, the significance of lead core heating effect on LRBs is discussed by considering the current design approach for base isolated structures. Results of this study show that the response of an LRB is governed strongly by the amplitude and number of cycles of the motion and the considered seismicity level.

• Journal of the Optical Society of Korea
• /
• 제13권3호
• /
• pp.373-378
• /
• 2009

An Ethernet passive optical network (EPON) is a low-cost, high-speed solution to the bottleneck problem of a broadband access network. This paper analyzes the delay and the jitter performance of dynamic bandwidth allocation (DBA) schemes for differentiated services in EPONs. Especially, the average packet delay and the delay jitter of the expedited forwarding (EF) traffic class are compared, with consideration as to whether a cyclic or an interleaved polling scheme is superior. This performance evaluation reveals that the cyclic polling based DBA scheme provides constant and predictable average packet delay and improved jitter performance for the EF traffic class without the influence of load variations.

• 한국환경과학회지
• /
• 제11권2호
• /
• pp.131-137
• /
• 2002

The chemical behavior and properties on the redox state of environmental pollutant has been investigated by electrochemical methods. We carried out to measure the variations in the redox reaction of differential pulse polarogram and cyclic voltammogram. The results observed the influences on redox potential and current of various factors with temperature and pH. These were established factors as the effect of the redox reaction. It can be clearly recognized that the electrode reaction are from qusi-reversible to irreversible processes. Also, it was mixing with reaction current controlled. The bits-phenol A in the waste water was made to compound with cobalt ion and it take away from the separation into compound. The $Co(BPA)_2$ compound was not found to be dissociation in waste water. However, this compound is avery unstable(K=1.02) and for a while, it was to be a dissociation. Therefore, we believed that it was likely to a toxic substance.

• 전자공학회논문지B
• /
• 제29B권3호
• /
• pp.6-15
• /
• 1992

This paper proposes a method for the global optimization of redundancy over the whole task period for a kinematically redundant robot. The necessary conditions based on the calculus of variations for an integral type cost criterion result in a second-order differential equation. For a cyclic task, the periodic boundary conditions due to conservativity requirements are discussed. We refine the two-point boundary value problem to an initial value adjustment problem and suggest a numerical search method for providing the conservative global optimal solution using the gradient projection method. Since the initial joint velocity is parameterized with the number of the redundancy, we only search the parameter value in the space of as many dimensions as the number of degrees of redundancy. We show through numerical examples that multiple nonhomotopic extremal solutions and the generality of the proposed method by considering the dynamics of a robot.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권2호
• /
• pp.67-74
• /
• 2010

철근콘크리트 지붕 슬래브에 작용하는 온도변화는 여름에는 부재를 팽창시키고 겨울에는 수축시키기 때문에 콘크리트의 응력변화를 야기시키며 이와 같은 거동은 년단위로 반복되어 사용성과 극한상태 모두에 대해서 부재의 구조성능에 영향을 미친다. 본 논문에서는 최근 20년 동안 한국의 기상변화를 분석하여 온도변화의 패턴을 계산하였으며 또한 이와 같이 장기적으로 반복되는 온도변화에 대한 영향을 실험적으로 연구하였다. 6개의 동일한 형태를 가진 철근콘크리트 슬래브를 제작하고 가력주기와 손상유무를 주 변수로 실험을 실시하였다. 실험으로부터, 1년, 10년 20년 동안의 가력기간 변화에 따른 슬래브의 강성변화에서, 여름의 경우에는 10년에서 1년 일 때의 강성과 비교하여 약 30% 정도 감소되고 겨울의 경우에는 30년 이후부터 약 31%(1년과 비교) 저하되는 것으로 나타났다. 또한 이들 손상된 RC슬래브에 대한 파괴실험을 통하여 슬래브 부재의 보유성능을 평가한 결과, 외기에 노출된 기간의 변화에 따른 슬래브 부재의 초기강성 및 최대내력의 변화는 크지 않은 것으로 나타났다. 단, 20년 이상의 반복온도하중을 받은 경우에는 항복내력이 낮아지는 경향을 보이는 것으로 나타났다.