• Journal of Life Science
• /
• v.17 no.12
• /
• pp.1641-1648
• /
• 2007

Yippee-like proteins, which have been identified as the homolog of Drosophila yippee protein containing a zinc-finger domain, are known to be highly conserved among eukaryotes. However, their functional roles are still poorly understood. Recently we initiated ordered differential display (ODD)-polymerase chain reaction (PCR) to isolate genes of which expressions are altered following activation of human T cells. On the ODD-PCR image, one PCR-product detected in unstimulated T cells was not detectable at the time when the activated T cells traversed near $G_1/S$ boundary following activation by immobilized anti-CD3. Cloning and nucleotide sequence analysis revealed that the PCR-product was yippee-like 5 (YPEL5) gene, which was known as a human homolog of the Drosophila yippee gene. Northern blot analysis confirmed the amount of ${\sim}2.2$ kb YPEL5 mRNA expression detectable in unstimulated T cells was sustained until 1.5 hr after activation and then rapidly declined to undetectable level by 5 hr. Ectopic expression of YPEL5 gene in human cervix epitheloid carcinoma HeLa cells caused a significant reduction in cell proliferation to the level of 47% of the control. Expression of GFP-YPEL5 fusion protein in HeLa cells showed its nuclear localization. These results demonstrated that the expression level of human YPEL5 mRNA was negatively regulated in the early stage of T cell activation, and suggested that YPEL5 might exert an inhibitory effect on the cell proliferation as a nuclear protein.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.1
• /
• pp.34-38
• /
• 2017

Purpose During PET/CT examinations, the movements of internal organs caused by respiration are captured in images during multiple breathing cycles, resulting in the increases in tumor size and effects on SUV. Respiratory synchronized systems were used to evaluate tumor sizes and SUV changes. Materials and Methods Biograph mCT 64 was used for the equipment, and RPM and Anzai systems were used for the respiratory synchronized systems. We used point source and micro-phantom for an experimentation. We were performed on 12 patients who had solid tumors discovered at the base of the lung or at the top of the liver from August through September 2016. The PET images of the exhalation-to-breathing state and the CT images of the post-exhalation suspension state were gained to evaluate changes in radioactivity concentration (KBq/mL), SUVmax, cylinder diameter (mm), and tumor diameter (cm) under the conventional Static, RPM, and Anzai methods. Results The result of measuring the radioactivity concentration of the point source was RPM 94% and Anzai 91% against Static, respectively. In the two cylinders of different radioactivity in the micro-phantom, the SUVmax increased to RPM 61% and 78%, and Anzai 58% and 77% against Static, whereas the cylinder diameters decreased by RPM -26% and -28%, and Anzai -28% and -26%, each respectively. Among the patients, the SUVmax increased from a minimum of RPM 8.2% to a maximum of 94.4% against Static, and from a minimum of Anzai 7.6% to a maximum of 68.3%, respectively. As for the tumor diameters, a minimum of RPM -7.6% to a maximum of -28.9% were achieved, while the Anzai fell by a minimum of -9.6% to a maximum of -27.7%, respectively. There was no significant difference discovered in the phantom study between the RPM and Anzai, yet there was a meaningful difference in the patients' tumors (P<0.05). Conclusion The respiratory synchronized systems of RPM and Anzai yielded no significant difference in the phantom study in which the respiration was executed at regular intervals. However, it was discovered that the patients had a meaningful difference for the irregular respiratory cycle and inter-system differences. Still, the respiratory synchronized systems would be useful for the accurate diagnosis and SUV measurement as the tumor decreased in size against the existing Static and the SUV increased.

• Journal of Distribution Science
• /
• v.9 no.3
• /
• pp.83-94
• /
• 2011

Most domestic companies, with the exclusion of major firms, are reluctant to implement a supply chain management (SCM) network into their operations. Most small- and medium-sized enterprises are not even aware of SCM. Due to the inherent total-systems efficiency of SCM, it coordinates domestic manufacturers, subcontractors, distributors, and physical distributors and cuts down on cost of inventory control, as well as demand management. Furthermore, a lack of SCM causes a decrease in competitiveness for domestic companies. The reason lies in the fundamentality of SCM, which is the characteristic of information sharing, process innovation throughout SCM, and the vast range of problems the SCM management tool is able to address. This study suggests the contemplation and reformation of the current SCM situation by analyzing the SCM strategic plan, discourses and logical discussions on the topic, and a successful case for adapting SCM; hence, the study plans to productively "process" SCM. First, it is necessary to contemplate the theoretical background of SCM before discussing how to successfully process SCM. I will describe the concept and background of SCM in Chapter 2, with a definition of SCM, types of SCM promotional activities, fields of SCM, necessity of applying SCM, and the effects of SCM. All of the defects in currently processing SCM will be introduced in Chapter 3. Discussion items include the following: the Bullwhip Effect; the breakdown in supply chain and sales networks due to e-business; the issue that even though the key to a successful SCM is cooperation between the production and distribution company, during the process of SCM, the companies, many times, put their profits first, resulting in a possible defect in demands estimation. Furthermore, the problems of processing SCM in a domestic distribution-production company concern Information Technology; for example, the new system introduced to the company is not compatible with the pre-existing document architecture. Second, for effective management, distribution and production companies should cooperate and enhance their partnership in the aspect of the corporation; however, in reality, this seldom occurs. Third, in the aspect of the work process, introducing SCM could provoke corporations during the integration of the distribution-production process. Fourth, to increase the achievement of the SCM strategy process, they need to set up a cross-functional team; however, many times, business partners lack the cooperation and business-information sharing tools necessary to effect the transition to SCM. Chapter 4 will address an SCM strategic plan and a case study of LG Electronics. The purpose of the strategic plan, strategic plans for types of business, adopting SCM in a distribution company, and the global supply chain process of LG Electronics will be introduced. The conclusion of the study is located in Chapter 5, which addresses the issue of the fierce competition that companies currently face in the global market environment and their increased investment in SCM, in order to better cope with short product life cycle and high customer expectations. The SCM management system has evolved through the adaptation of improved information, communication, and transportation technologies; now, it demands the utilization of various strategic resources. The introduction of SCM provides benefits to the management of a network of interconnected businesses by securing customer loyalty with cost and time savings, derived through the consolidation of many distribution systems; additionally, SCM helps enterprises form a wide range of marketing strategies. Thus, we could conclude that not only the distributors but all types of businesses should adopt the systems approach to supply chain strategies. SCM deals with the basic stream of distribution and increases the value of a company by replacing physical distribution with information. By the company obtaining and sharing ready information, it is able to create customer satisfaction at the end point of delivery to the consumer.

• Journal of The Geomorphological Association of Korea
• /
• v.15 no.2
• /
• pp.67-83
• /
• 2008

To find out the process of hillslope denudation since the Last Glacial Maximum in Asan area, we conducted the stratiform interpretation and carbon age measurements with the collected samples through trenching in the valley bottom of 'Agol' located in the lower stream of Magok stream. The results are as follows. 11 inorganic and 8 organic matter layers were confirmed at the point of trench MG1 in the subject area, 7 inorganic and 3 organic at the point of trench MG2, and 5 inorganic and 3 organic at the point of trench MG3, respectively. The frequency of hillslope denudation, hillslope mass movement, which had occurred in the unstable environment of back hillslope at the point of MG 1, was 11 times (8 times before about 2,900yrBP, twice in between about 2,900~1,900yrBP, and once after about 1,900yrBP) as a whole. The frequency of moor which had formed in the comparatively stable environment of back hillslope was 9 times (5 times before about 3,000yrBP, twice in between 3,000~2,800yrBP, and once in between 2,200~1,900yrBP) at minimum. The frequency of back hillslope denudation at the point of MG2 was totally 7 times (4 times before about 1,900yrBP and 3 times after about 1,900yrBP) and the moor formations were 3 times (twice before about 1,900yrBP and once after 1,900yrBP). The frequency of back hillslope denudation at the point of MG3 was totally 5 times (3 times before about 1,900yrBP and twice after about 1,900yrBP) and the moor formations were 3 times (twice before about 1,900yrBP and once after 1,900yrBP). The hillslope surrounded by valley bottom of 'Agol' was confirmed as the pile up of various inorganic matters by the mass movement such as sand or sandy gravel in the valley bottom of the subject area, formed not once but several times of denudation. We could know that the hillslope denudation cycle converged to the time period of $10^2{\sim}10^3$ years. These results will be an important basic data for restoring hillslope denudation process near Asan and changing climate of the Late Quaternary Period.

• Korean Journal of Environment and Ecology
• /
• v.33 no.5
• /
• pp.497-505
• /
• 2019

Winter hibernation in wildlife is a unique physiological mechanism for survival. For Asiatic black bears (ABBs, Ursus thibetanus ussuricus), hibernation is a very important but dangerous time for the cubs to be born. This study surveyed ABBs living in Mt. Jiri To examine the relationship between the temperature during hibernation and the hibernation days. The survey found that the average start and end dates of hibernation was December 7 and April 20, respectively. The average day of hibernation for females who gave birth was $167.8{\pm}22.6$ days. The average temperature of 5 days before hibernation was $0.6{\pm}4.1^{\circ}C$, the average temperature during hibernation was $1.3{\pm}2.43^{\circ}C$, and the average temperature of five days before the end of hibernation was $12.6{\pm}3.1^{\circ}C$. The hibernation days of the females that did not give birth to cubs and the males were $120.4{\pm}25.7$ days and $113.6{\pm}25.8$ days, respectively. The average temperatures of 5 days before hibernation was $2.1{\pm}4.2^{\circ}C$ and $-1.8{\pm}3.9^{\circ}C$, respectively. The average temperature during hibernation was $-0.2{\pm}1.6^{\circ}C$ and $-0.4{\pm}2.4^{\circ}C$. The average temperatures of five days before the end of hibernation were $7.8{\pm}3.6^{\circ}C$ and $7.8{\pm}4.4^{\circ}C$. These results indicate that females giving birth to cubs have higher hibernation days and average temperatures than the females that do not give birth and the males, which is due to the process of raising cubs during hibernation. The hibernating days and mean temperature for the groups in each lifecycle did not show any difference between the groups. This study is meaningful in that it disclosed the characteristics of hibernating intrinsic behaviors of ABBs. It observed the specific hibernation period and temperature of ABBs bears inhabiting in Mt. Jiri and examined the difference by sex, female(giving birth) and life cycle group according to temperature. The results of this study can be used to prevent the conflict between ABBs and humans in winter and spring and establish the preservation management plan.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_2
• /
• pp.1329-1340
• /
• 2021

The intertidal zone, which is a transitional zone between the ocean and the land, requires continuous monitoring as various changes occur rapidly due to artificial activity and natural disturbance. Monitoring of coastal topography changes using remote sensing method is evaluated to be effective in overcoming the limitations of intertidal zone accessibility and observing long-term topographic changes in intertidal zone. Most of the existing coastal topographic monitoring studies using remote sensing were conducted through high spatial resolution images such as Landsat and Sentinel. This study extracted the waterline using the NDWI from the GOCI-II (Geostationary Ocean Color Satellite-II) data, identified the changes in the intertidal area in Gyeonggi Bay according to various tidal heights, and examined the utility of DEM generation and topography altitude change observation over a short period of time. GOCI-II (249 scenes), Sentinel-2A/B (39 scenes), Landsat 8 OLI (7 scenes) images were obtained around Gyeonggi Bay from October 8, 2020 to August 16, 2021. If generating intertidal area DEM, Sentinel and Landsat images required at least 3 months to 1 year of data collection, but the GOCI-II satellite was able to generate intertidal area DEM in Gyeonggi Bay using only one day of data according to tidal heights, and the topography altitude was also observed through exposure frequency. When observing coastal topography changes using the GOCI-II satellite, it would be a good idea to detect topography changes early through a short cycle and to accurately interpolate and utilize insufficient spatial resolutions using multi-remote sensing data of high resolution. Based on the above results, it is expected that it will be possible to quickly provide information necessary for the latest topographic map and coastal management of the Korean Peninsula by expanding the research area and developing technologies that can be automatically analyzed and detected.

• Journal of the Korean Electrochemical Society
• /
• v.22 no.1
• /
• pp.36-42
• /
• 2019

A macroporous Sn thick film as a high capacity negative electrode for a lithium ion secondary battery was prepared by using a chemical etching method using nitric acid for a Sn film having a thickness of $52{\mu}m$. The porous Sn thick film greatly reduced the over-voltage for the alloying reaction with lithium by the increased reaction area. At the same time. The porous structure of active Sn film plays a part in the buffer and reduces the damage by the volume change during cycles. Since the porous Sn thick film electrode does not require the use of the binder and the conductive carbon black, it has substantially larger energy density. As the concentration of nitric acid in etching solution increased, the degree of the etching increased. The etching of the Sn film effectively proceeded with nitric acid of 3 M concentration or more. The porous Sn film could not be recovered because the most of Sn was eluted within 60 seconds by the rapid etching rate in the 5 M nitric acid. In the case of etching with 4 M nitric acid for 60 seconds, the appropriate porous Sn film was formed with 48.9% of weight loss and 40.3% of thickness change during chemical acid etching process. As the degree of etching of Sn film increased, the electrochemical activity and the reversible capacity for the lithium storage of the Sn film electrode were increased. The highest reversible specific capacity of 650 mAh/g was achieved at the etching condition with 4 M nitric acid. The porous Sn film electrode showed better cycle performance than the conventional electrode using a Sn powder.

• Journal of Energy Engineering
• /
• v.28 no.2
• /
• pp.18-35
• /
• 2019

The Korea District Heating Corporation operates a gas engine generator with a capacity of $4500m^3 /day$ of biogas generated from the sewage treatment plant of the Nanji Water Recycling Center and 1,500 kW. However, the actual operation experience of the biogas power plant is insufficient, and due to lack of accumulated technology and know-how, frequent breakdown and stoppage of the gas engine causes a lot of economic loss. Therefore, it is necessary to prepare technical fundamental measures for stable operation of the power plant In this study, a series of process problems of the gas engine plant using the biogas generated in the sewage treatment plant of the Nanji Water Recovery Center were identified and the optimization of the actual operation was made by minimizing the problems in each step. In order to purify the gas, which is the main cause of the failure stop, the conditions for establishing the quality standard of the adsorption capacity of the activated carbon were established through the analysis of the components and the adsorption test for the active carbon being used at present. In addition, the system was applied to actual operation by applying standards for replacement cycle of activated carbon to minimize impurities, strengthening measurement period of hydrogen sulfide, localization of activated carbon, and strengthening and improving the operation standards of the plant. As a result, the operating performance of gas engine # 1 was increased by 530% and the operation of the second engine was increased by 250%. In addition, improvement of vent line equipment has reduced work process and increased normal operation time and operation rate. In terms of economic efficiency, it also showed a sales increase of KRW 77,000 / year. By applying the strengthening and improvement measures of operating standards, it is possible to reduce the stoppage of the biogas plant, increase the utilization rate, It is judged to be an operational plan.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.3
• /
• pp.135-145
• /
• 2019

Analysis of a long cycle or a trend of time series data based on a long-term observation would require comparability between data observed in the past and the present. In the present study, we proposed an approach to ensure the compatibility among the instruments used for the long-term observation, which would allow to secure continuity of the data. An open-path gas analyzer (Model LI-7500, LI-COR, Inc., USA) has been used for eddy covariance flux measurement in the Gwangneung deciduous forest for more than 10 years. The open-path gas analyzer was replaced by an enclosed-path gas analyzer (Model EC155, Campbell Scientific, Inc., USA) in July 2015. Before completely replacing the gas analyzer, the carbon dioxide ($CO_2$) and latent heat fluxes were collected using both gas analyzers simultaneously during a five-month period from August to December in 2015. It was found that the $CO_2$ fluxes were not significantly different between the gas analyzers under the condition that the daily mean temperature was higher than $0^{\circ}C$. However, the $CO_2$ flux measured by the open-path gas analyzer was negatively biased (from positive sign, i.e., carbon source, to 0 or negative sign, i.e., carbon neutral or sink) due to the instrument surface heating under the condition that the daily mean temperature was lower than $0^{\circ}C$. Despite applying the frequency response correction associated with tube attenuation of water vapor, the latent heat flux measured by the enclosed-path gas analyzer was on average 9% smaller than that measured by the open-path gas analyzer, which resulted in >20% difference of the sums over the study period. These results indicated that application of the additional air density correction would be needed due to the instrument heat and analysis of the long-term observational flux data would be facilitated by understanding the underestimation tendency of latent heat flux measurements by an enclosed-path gas analyzer.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.3
• /
• pp.240-255
• /
• 2016

In many cities in the East and West during the modern period, historical resources were perceived as obstacles to urban development and were treated as deficiencies calling for development. Korea underwent a process of drastic urbanization and industrialization almost unprecedented in modern history. In this process of turmoil, cities expanded rapidly and went through a series of changes. City development followed a repeated cycle in which resources were concentrated in the city area, which, in turn, led to further development. However, such method of development is reaching its limits. In order to make a city desirable for living, it is crucial to make an effort to build a sustainable city environment where life and history coexist harmoniously. It is now time to consider how to carry forth sustainable development in the city where the past, present, and future coexist. If so, how will the future of our cities look and the form of housing change? To answer this question, we examined Urban Hanok Residential Areas and Hanyangdoseong neighborhood village, which went through rapid changes in the modern period. The Hanok, which was a commonplace sight in the past, has been perceived as an underdeveloped form of housing, easily targeted for redevelopment only a few years ago; so was the case with Hanyangdoseong neighborhood village. Yet now these are being revalued as sustainable housing areas able to coexist with the history of the city. That is, through restoration, their potential of contributing to the history and identity of the city is gaining recognition. In this regard, it holds great implications for us to look at the changes that traditional Korean housing areas and castle villages have undergone.