• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.12
• /
• pp.692-703
• /
• 2004

Communication induced checkpointing (CIC) is one of the checkpointing techniques to provide fault tolerance for distributed systems. Independent checkpoints that each distributed process produces without coordination are likely to be useless. Useless checkpoints, which cannot belong to any consistent global checkpoint sets, induce nondeterminant rollback. To prevent the useless checkpoints, CIC forces processes to take additional checkpoints at proper moment. The number of those forced checkpoints is the main source of failure-free overhead in CIC. In this paper, we present two new CIC protocols which satisfy 'No Z-Cycle (NZC)'property. The proposed protocols reduce the number of forced checkpoints compared to the existing protocols with the drawback of the increase in message delay. Our simulation results with the synthetic data show that the proposed protocols have lower failure-free overhead than the existing protocols. Additionally, we show that the classical 'index-based checkpointing' protocols are inefficient in constructing the consistent global cut in distributed executions.

• Korean Journal of Metals and Materials
• /
• v.48 no.1
• /
• pp.28-38
• /
• 2010

High temperature high cycle and low cycle fatigue deformation behavior of automotive heat resistant aluminum alloys (A356 and A319 based) were investigated in this study. The microstructures of both alloys were composed of primary Al-Si dendrite and eutectic Si phase. However, the size and distribution for eutectic Si phase varied: a coarse and inhomogeneous distributed was observed in alloy B (A319 based). A brittle intermethallic phase of ${\alpha}-Fe\;Al_{12}(Fe,Mn)_3Si_2$ was detected only in B alloy. Alloy B exhibited high fatigue life only under a high stress amplitued condition in the high cycle fatigue results, whereas alloy A showed high fatigue life when stress was lowered. With regard to the low-cycle fatigue result ($250^{\circ}C$) showing higher fatigue life as ductility increased, alloy A demonstrated higher fatigue life under all of the strain amplitude conditions. Fractographic observations showed that large porosities and pores near the outside surface could be the main factor in the formation of fatigue cracks. In alloy B. micro-cracks were formed in both the brittle intermetallic and coarse Si phasese. These micro-cracks then coalesced together and provided a path for fatigue crack propagation. From the observation of the differences in microstructure and fractography of these two automotive alloys, the authors attempt to explain the high-temperature fatigue deformation behavior of heat resistant aluminum alloys.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.43-48
• /
• 2000

Composite materials have been increasingly used in automotive and aircraft industries, naturally leading to active researches on the materials. The carbon-epoxy composite is selected to study its thermal characteristics. During multiple thermal cycles composed of repeated cooling and heating variations of elastic constants are investigated to understand thermal effects on the carbon-epoxy composite. In this investigation longitudinal resonance method and flexural resonance method was used to characterize. The values of $E_1$ show small amount of increases depending on number of cycles of the thermal fatigue processes whereas values of $G_13$ do not indicate noticeable changes. Also, in cases of $E_2$ and $G_23$ their values decrease to a certain extend in initial stages after applications of thermal fatigue processes. However, the number of cycles of the applied thermal fatigue processes does not seem to affect their values.

• Journal of the Chungcheong Mathematical Society
• /
• v.22 no.4
• /
• pp.789-797
• /
• 2009

Invertible transformations over n-bit words are essential ingredients in many cryptographic constructions. When n is large (e.g., n = 64) such invertible transformations are usually represented as a composition of simpler operations such as linear functions, S-P networks, Feistel structures and T-functions. Among them we will study T-functions which are probably invertible transformation and are very useful in stream ciphers. In this paper we will show that $f(x)=x+(g(x)^2{\vee}C)$ mod $2^n$ is a permutation with a single cycle of length $2^n$ if both the least significant bit and the third significant bit in the constant C are 1, where g(x) is a T-function.

• Journal of the Korean institute of surface engineering
• /
• v.30 no.4
• /
• pp.231-238
• /
• 1997

Tantalum oxide thin filme has an amorphous structure and a high resistivity. Its stoichiometric structure was $Ta_2O_{5.3}$ and the transmission ratio was 80%. The high resistivity of $Ta_2O_{5.3}$ thin film electrolyte made an EC windows without electrical shottness, but the bleached/colored cur rent was very low because of the low ion conductivith. Upon adding moisture into the system, the $\Delta$T increased upto 25 %. proton concentration increase was the main cases to improve optical property. The influence of adding precious or transition metal film(~100 $\AA$ thickness) in $Ta_2O_5$layer on the color change performance was observed. The metal insertion layers had formed hydroxide and they behaved as a stable proton source. The transmission diffrnece and cycle life were greatly enhanced in the case of Ti inssertion.The $\Delta$T was 50% and the cycle life was 18, 000.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.407-410
• /
• 1998

During the past decade, substantial research effort has been directed into the development of rechargeable lithium batteries. Although some improvements in cycle life and efficiency have been achieved, the reversibility of the lithium electrode remains as a significant problem in aprotic solvent based electrolyte. The major problems limiting cycle life are short circuits resulting from growth of lithium dendrites, and macroscopic shape changes during the recharge process. As an anode material of lithium rechargeable battery, amorphous carbon materials have been studied extensively because of their high electrochemical performance. The polyacene materials prepared from phenol refine at relatively low temperature(550∼750$^{\circ}C$) show a highly Li-doped state up C$_2$Li state without liberation of Li cluster. So it has largely layered distance 4${\AA}$. The Li storage mechanism as well as the large hysterisis observed in the voltage-capacity profile of the amorphous carbone materials are still the subjects of controversy. We prepared each polyacene material various temperature and investigated electrochemical property. The mole ratio of [H]/[C] is 0.027∼0.015 range.

• Journal of the Korea Institute of Building Construction
• /
• v.7 no.3
• /
• pp.107-113
• /
• 2007

This study is to investigate adhesive properties depending on the temperature, humidity, and freeze-thraw of the Steel plate adhesive strengthening method by the epoxy resin. The results are summarized as following. For the temperature variation, the debonding failure appear only after 1 cycle of temperature varoation because the coefficient of thermal expansion of the epoxy resin is comparatively large, and the bonding strength is decreased. The deformation properties and ultrasonic pulse velocity on each materials are similar until 4 cycles on the dry and moisture test. As the freeze-thraw test, the epoxy resin is degraded easily subjected to freeze-thaw cycle, comparatively easy, so the debonding failure may occur in short term because of the freeze-thaw repeatition.p

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.765-768
• /
• 2004

This study reports the site application of the early strength development technology for form stripping earlier than normal state in the apartment construction. It is a method of framework rationalization and it needs the technology of early strength development concrete and 6-day cycle process. We applied the method to the apartment construction to reduce the floor construction period and to maximize the economical effect by reduction of the period of total construction. As a result, we confirmed the superior property of the early strength development of the concrete and reliable success of 6-day cycle process.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.15 no.4
• /
• pp.182-190
• /
• 2007

Refrigeration and air-conditioning equipments are indispensable products in this civilized society. However, discharged refrigerants used in the equipments and exhausted carbon dioxide to drive the refrigeration and air-conditioning equipments are related to serious environmental problems and energy problems. Especially, the destroyed ozonosphere by the discharged refrigerants and the increased normal temperature by carbon dioxide and fluorocarbon refrigerants (green house gases) are sounded as serious global problems. For alleviating these problems, environmental-friendly refrigeration and air-conditioning equipments must be developed and will spread soon. To develop new equipment, a suitable refrigerant for each usage must be presented. In this paper, the current state of refrigerants was introduced. And, thermophysical properties of the refrigerants were introduced briefly. From the properties, the refrigerants and refrigeration cycles are promising to be used in the future, were proposed

• Journal of Korean Medical classics
• /
• v.12 no.2
• /
• pp.176-183
• /
• 1999

Each life has its own properties that distinguish one another. With this property, Oriental medicine suggests original diagnosis and treament. Our process of aging shows typical outline of cycle, i. e. from one's birth to death. Understanding the life cycle of men gives us very good hint to predict one's state of health, possible diseases, characteristics of disease in each term of his/her life cycle. It's because body and mode of diseases change according to age. Aging starts when $\breve{U}$m Essence(陰精)-the essence one receive from parents-dries up or when Deficient Fire(虛火) soars. Parts that compose our body-bones, muscles, flesh, etc.-gradually weaken and worn out as they no longer get support from Yang-Ki(陽氣), In "Yellow Emperor's Classic", aging starts around one's forties when $\breve{U}$m Essence(陰精) is reduced to less than half. However, what is usually accepted is that women start aging from 49 and men 64, regarding significant geriatric disease. As it is mentioned, aging starts with exhaustion of $\breve{U}$m Essence(陰精) which results in soaring Deficient Fire. Main symptoms are weak mental state due to Sin(神) disorder, and weak physical state due to Spleen and Stomacn(脾胃) disorder. Main principle in treating and preventing diseases related to aging is preserving $\breve{U}$m Essence(陰精), as well as fortifying Ki and Blood(氣血). To do this, Lung(肺)-which collects $\breve{U}$m Essence(陰精), and Kidney(腎) stores-which stores $\breve{U}$m Essence(陰精).