• 한국재료학회지
• /
• 제24권9호
• /
• pp.481-487
• /
• 2014

The effect of alpha phase on the fatigue properties of Fe-29%Ni-17%Co low thermal expansion alloy was investigated. Two kinds of alloys (Base alloy and Alpha alloy) were prepared by controlling the minimal alloy composition. Microstructure observation, tensile, high-cycle fatigue, and low-cycle fatigue results were measured in this study. The Base alloy microstructure showed typical austenite ${\gamma}$ phase. Alpha alloy represented the dispersed phase in the austenite ${\gamma}$ matrix. As a result of tensile testing, Alpha alloy was found to have higher strengths (Y.S. & T.S.) and lower elongation compared to those of the Base alloy. High cycle fatigue results showed that Alpha alloy had a higher fatigue limit (360MPa) than that (330MPa) of the Base alloy. The Alpha alloy exhibited the superior high cycle fatigue property in all of the fatigue stress conditions. SEM fractography results showed that the alpha phase could act to effectively retard both fatigue crack initiation and crack propagation. In the case of low-cycle fatigue, the Base alloy had longer fatigue life in the high plastic strain amplitude region and the Alpha alloy showed better fatigue property only in the low plastic strain amplitude region. The fatigue deformation behavior of the Fe-29%Ni-17%Co alloy was also discussed as related with its microstructure.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권2호
• /
• pp.152-156
• /
• 2013

This paper presents a fast-lock dual-loop successive approximation register-controlled duty-cycle corrector (SARDCC) circuit using a mixed (binary+sequential) search algorithm. A wider duty-cycle correction range, higher operating frequency, and higher duty-cycle correction accuracy have been achieved by utilizing the dual-loop architecture and the binary search SAR that achieves the fast duty-cycle correcting property. By transforming the binary search SAR into a sequential search counter after the first DCC lock-in, the proposed dual-loop SARDCC keeps the closed-loop characteristic and tracks variations in process, voltage, and temperature (PVT). The measured duty cycle error is less than ${\pm}0.86%$ for a wide input duty-cycle range of 15-85 % over a wide frequency range of 0.5-2.0 GHz. The proposed dual-loop SARDCC is fabricated in a 0.18-${\mu}m$, 1.8-V CMOS process and occupies an active area of $0.075mm^2$.

• Journal of Astronomy and Space Sciences
• /
• 제29권2호
• /
• pp.97-101
• /
• 2012

Monitoring sunspots consistently is the most basic step required to study various aspects of solar activity. To achieve this goal, the observers must regularly calculate their own correction factor $k$ and keep it stable. Relatively recently, two observing teams in South Korea have presented interesting papers which claim that revisions that take the yearly-basis $k$ into account lead to a better agreement with the international relative sunspot number $R_i$, and that yearly $k$ apparently varies with the solar cycle. In this paper, using artificial data sets we have modeled the sunspot numbers as a superposition of random noise and a slowly varying background function, and attempted to investigate whether the variation in the correction factor is coupled with the solar cycle. Regardless of the statistical distributions of the random noise, we have found the correction factor increases as sunspot numbers increase, as claimed in the reports mentioned above. The degree of dependence of correction factor $k$ on the sunspot number is subject to the signal-to-noise ratio. Therefore, we conclude that apparent dependence of the value of the correction factor $k$ on the phase of the solar cycle is not due to a physical property, but a statistical property of the data.

• Food Science and Biotechnology
• /
• 제17권4호
• /
• pp.755-760
• /
• 2008

The aim of this study was to produce resistant starch preparations from acid-modified com starches prepared at various hydrolysis levels (0.5-4.0 hr). Effect of autoclaving cycles on resistant starch (RS) formation was investigated. Molecular weight distribution, pasting and functional properties of acid-modified com starches were determined. For RS formation native and acid-modified starch samples were gelatinized and autoclaved (1 or 2 cycles). While native and acid-modified starches did not contain any RS, the levels increased to 9.0-13.5% as a result of storage at $95^{\circ}C$ after first autoclaving cycle. Second autoclaving cycle together with storage at $95^{\circ}C$ brought final RS contents of the samples incubated at 4 and $95^{\circ}C$ after the first cycle to comparable level. As acid modification level increased, the amount of high molecular weight fractions decreased, resulting in significant decreases in viscosities (p<0.05). The samples produced in this study had low emulsion stability and capacity values.

• 한국주조공학회지
• /
• 제31권4호
• /
• pp.198-204
• /
• 2011

The present study was aimed to investigate the dependence of fatigue property on microporosity variation of low-pressure die-cast (LPDC) A356 alloy. The fatigue property of A356 alloy was evaluated through high cycle fatigue test, and the microporosity-terms used were the fractographic porosity measured from SEM observation on fractured surface and the volumetric porosity obtained through the density measurement using Archimedes's principle. The number of cycles to failure of A356 alloys depends obviously upon the variation of fractographic porosity, and can describe in terms of the defect susceptibility which depends on the microporosity variation at a given value of stress amplitude. The modified Basquin's equation was suggested through the combination of microporosity variation and static maximum tensile stress to fatigue strength coefficient. Using modified Basquin's equation, it could suggest that the maximum values of fatigue strength coefficient and exponent achievable in defect-free condition of A356 alloy are 265 MPa, -0.07, respectively.

• 대한수학회보
• /
• 제33권3호
• /
• pp.385-392
• /
• 1996

Smale [16] posed the following question; is having an attracting periodic orbit a generic property for diffeomorphisms of two-sphere $S^2\ulcorner$(A generic property of $f \in Diff(M)$ is one that is true for a Baire set in Diff(M)). Mane[5] and Plykin[13] had an positive answer for Axiom A diffeomorphisms of $S^2$. To explain our theorem, we begin by briefly recalling stability conjecture posed by palis and smale.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.126-131
• /
• 2001

Materials property data are necessary to secure the reliability of failure prevention techniques such as inspection and remaining life assessment of civil infrastructure and industrial facilities. However, there is no properly collected data in Korea, and those foreign data are hard to use because of the scattering of the sources, the difference of standards, etc. In this paper, materials property database system which has been constructed at Korea Research Institute of Standards and Science is introduced. Constructed database contains 145,000 numeric data of materials property for 600 kinds of metals and can be retrieved on the internet. The database system provides graphical user interface-based information searching functions necessary for the life evaluation and safety analysis.

• 통상정보연구
• /
• 제10권3호
• /
• pp.291-313
• /
• 2008

As digital economy has dramatically evolved, new intellectual property rights protection has emerged as a pivotal issue which companies need to actively restxnid to. At the new digital era, the possession of new intellectual property rights determines the company values, and thus the protection of new intellectual property rights is getting more importance in the dimension of global competitiveness. The paper analyzes the changing aspect of digital economy and e-commerce paradigm, and explores the protection plan of new intellectual property rights focusing on e-commerce and digital goods transaction so that it can help the companies to strengthen their global competitiveness. After various case studies, we can find out that even though the companies have difficulty in settling out the strategies and policy due to the radical change of cycle in internet-centered digital economy, companies need to establish the systemic strategic plan to protect the new intellectual property rights stage by stage. Also, appropriate legal, institutional basis to protect the new intellectual property rights should be rearranged. The unsloved problems which relates with the protection of new intellectual property rights will be left for next research project.

• Journal of applied mathematics & informatics
• /
• 제29권1_2호
• /
• pp.247-255
• /
• 2011

Invertible functions with a single cycle property have many cryptographic applications. The main context in which we study them in this paper is pseudo random generation and stream ciphers. In some cryptographic applications we need a generator which generates binary sequences of period long enough. A common way to increase the size of the state and extend the period of a generator is to run in parallel and combine the outputs of several generators with different period. In this paper we will characterize a secure quadratic polynomial on $\mathbb{Z}_{2^n}$, which generates a binary sequence of period long enough and without consecutive elements.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.83-83
• /
• 2009

The automotive chassis components are structural assemblies that support the engine, suspension, and steering components of the vehicle. For the development of AHSS components, the durability analysis is important. In this paper, the low cycle fatigue property of AHSS was evaluated for the geometry complex and local plasticity in the base material. The GMAW optimization was implemented for the weld soundness using the moving least square method. And the weld S-N curves of AHSS were evaluated to access durability analysis for the weld region. For the verification, the durability analysis of the couple torsion beam axle (CTBA) was performed and compared to the rig test result. The durability analysis using the low cycle fatigue property and the evaluated weld S-N curve of AHSS met the good agreement with the test result.