• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.401-404
• /
• 1996

A new method for the electrostatic suspension of disk-shaped objects is proposed which is based on a switched-voltage control scheme. It operates according to a relay feedback control and deploys only a single high-voltage power supply capable of delivering a dc voltage of positive and/or negative polarity. In addition to the unique feature that no high-voltage amplifiers are needed, this method provides a remarkable system simplification relative to conventional methods. It is shown that despite the inherent limit cycle property of relay feedback based control, an excellent performance in vibration suppression is attained due to the presence of a relatively large squeeze film damping. In this paper, the functional principle of the switched voltage control scheme, numerical analysis, stator electrode design, and a nonlinear dynamic model of the suspension system are described. Experimental results will be presented for a 4-inch silicon wafer that clearly reveal the capability of the proposed control structure to suspend the wafer stably at an airgap length of 50 .mu.m.

• Journal of the Korean Ceramic Society
• /
• v.38 no.8
• /
• pp.683-686
• /
• 2001

Electrochemically active lithium nickel cobalt oxide thin-film was not fabricated until now. The thin-film was deposited by RF magnetron sputtering at room temperature, and its initial phase was amorphous. By varying deposition condition, the different characteristics of thin-film were achieved. Using electrochemical analyses, the relationship between physical and electrochemical characteristics was identified. Crystallized thin-film by RTA (Rapid Thermal Annealing) was shown a good capacity and cycle property.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.10a
• /
• pp.147-152
• /
• 1999

Distribution of fracture system is an important factor to analyse instability of jointed rock slope. In the most case of rock slopes, joint distribution properties are related to potential, shape, size and locality of slope failure. The purpose of this paper is to present an application of fracture characterization related to rock slope failure. Fracture data used in this study are collected by scanline survey. Two aspects of fracture characterization for rock slope are handled in this study First, In order to determine the potential and shape of slope failure, trace length of joints is considered as the weighting factor about collected orientation data. Second, Relationship between trace length and spacing is analysed to estimate failure location and size. The distribution of fracture system is directly influenced on wedge failure. It is effective to analyse the orientation of fractures by using weighting factors associated with the trace length of fractures rather than to analyse only that of fractures. It gives a conclusion that the wedge failure occurred along the peak of fracture density(or intensity) cycles.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.1
• /
• pp.55-67
• /
• 2010

Decision problem called an optimal release policies, after testing a software system in development phase and transfer it to the user, is studied. The applied model of release time exploited infinite non-homogeneous Poisson process. This infinite non-homogeneous Poisson process is a model which reflects the possibility of introducing new faults when correcting or modifying the software. The failure life-cycle distribution used generalized gamma type distribution which has the efficient various property because of various shape and scale parameter. Thus, software release policies which minimize a total average software cost of development and maintenance under the constraint of satisfying a software reliability requirement becomes an optimal release policies. In a numerical example, after trend test applied and estimated the parameters using maximum likelihood estimation of inter-failure time data, estimated software optimal release time.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.3-32
• /
• 2016

High power impulse magnetron sputtering (HiPIMS) technique has been developed for more than 15 years. It is characterized by its ultra-high peak current and peak power density to obtain unique thin film properties, such as high hardness, good adhesion and tribological performance. However, its low deposition rate makes it hard to be applied in industries. In this work, the development of HiPIMS system and integration of radio frequency (RF) or mid-frequency (MF) power supplies were introduced. Effects of duty cycle and repetition frequency on the microstructure, mechanical property, optical and electrical properties of some binary, ternary and quarternary nitride coatings and oxide thin films were discussed. It can be observed that the deposition rate was effectively increased by the superimposed HiPIMS with RF or MF power. High hardness, good adhesion and sufficient wear resistance can be obtained through a proper adjustment of processing parameters of HiPIMS power system.

• Journal of Technology Innovation
• /
• v.12 no.2
• /
• pp.227-245
• /
• 2004

Studies on compensation structures of international technology licensing show that the level of intellectual property protection in the host market and the favorableness of the host country's economic environment are positively related to the use of running royalty-based compensation structure. Lump-sum fee or fixed royalty compensation is more likely to be used in the introduction and decline stages of the technology life cycle, and running royalty compensation in the growth stage. The international experience and the size of the licensor company are positively related to the use of running royalty. In this theoretical context, this paper analyzes the choice of compensation structures in Korean technology imports. The paper uses the officially reported data to analyze the compensation structures. It analyzes the characteristics of the compensation structures in terms of fixed royalty and running royalty by licensor country, group of licensor countries and size of licensee companies.

• East Asian Economic Review
• /
• v.22 no.3
• /
• pp.307-336
• /
• 2018

This paper proposes a monetary aggregate "Liquidity" that could serve as a useful indicator for gauging the appropriateness of monetary policy. If liquidity rises above a certain threshold, it is signaling that monetary policy is losing traction due to structural and other impediments even when the inflation gap remains open. This indicator supplements the financial cycle approach but adds value by providing a benchmark that is derived from the national account, and not based on its own trend. Over the last two decades, each time this measure rose above the threshold range, it was followed by a decline in GDP growth. The latter was greater when accompanied by a high physical asset value to GDP, e.g., an elevated property market.

• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.2
• /
• pp.187-192
• /
• 2002

In this paper we consider an M/G/1 queueing system with vacation. The length of vacation period may be controlled by the waiting time of the first customer. The server goes on vacation as soon as the system is empty, and resumes service either when the waiting time of the leading customer reaches a predetermined value, or when the vacation period is expired, whichever comes first. We consider two types of vacation, say, multiple vacation type and N-policy type. We derive the steady-state distributions of the number of customers at arbitrary time and arbitrary customer's waiting time by means of decomposition property. Also, the mean lengths of busy period, idle period and a cycle time are given.

• Communications for Statistical Applications and Methods
• /
• v.7 no.2
• /
• pp.563-573
• /
• 2000

In this thesis, we propose the test statistic for ordered alternatives on c-sample ranked set samples(RSS). The proposed test statistic JRSS is Jonckheere type statistic using the median of the i-th samples in each cycle. We obtained the asymptotic property of the proposed test statistic and the asymptotic relative efficiencies of the proposed test statistic with respect to J SRS which Jonckheere type statistic on simple random samples(SRS). From the simulation works, J RSS is superior to J SRS. We compared the empirical powers of J RSS with respect to U RSS on ranked set sample and U SRS on simple random sample using all samples, which are proposed by Kim, Kim and Lee(1999). The powers of J RSS are nearly the same values when entire sample size is large. J RSS is superior to U RSS. J RSS is simpler than U RSSon calculating process.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.973-975
• /
• 1992

The Acoustic Emission due to treeing progress in Crosslinked Polyethylene(XLPE) is studied by using the self developed automatic measuring system of acoustic emission. Tree progression and average pulse amplitude are almost in proportion to the rising of applied voltage but there is no proportionality relation between tree progression and pulse numbers. From now on, Skewness and kurtosis of average cycle, special property of $\phi$-a distribution characteristics can be confirmed as the useful parameters of treeing deterioration.