• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3543-3548
• /
• 2023

Shutdown chemistry evolution is performed in nuclear power plants at each refueling outage (RFO) to establish safe conditions to open system and minimize inventory of corrosion products in the reactor coolant system (RCS). After hydrogen peroxide is added to RCS during shutdown chemistry evolution, corrosion products are released and are removed by filters and ion exchange resins in the chemical volume control system (CVCS). Shutdown chemistry evolution including RCS clean-up time to remove released corrosion products impacts the critical path schedule during RFOs. The estimation of clean-up time prior to RFO can provide more reliable actions for RCS clean-up operations and transients to operators during shutdown chemistry. Electric Power Research Institute (EPRI) shutdown calculator (SDC) enables to provide clean-up time by Co-58 peak activity through operational data from nuclear power plants (NPPs). In this study, we have investigated the results of EPRI SDC by shutdown chemistry data of Co-58 activity using NPP data from previous cycles and modeled the estimated clean-up time by EPRI SDC using average Co-58 activity of the NPP. We selected two RFO data from the NPP to evaluate EPRI SDC results using the purification time to reach to 1.3 mCi/cc of Co-58 after hydrogen peroxide addition. Comparing two RFO data, the similar purification time between actual and computed data by EPRI SDC, 0.92 and 1.74 h respectively, was observed with the deviation of 3.7-7.2%. As the modeling the estimated clean-up time, we calculated average Co-58 peak concentration for normal cycles after cycle 10 and applied two-sigma (2σ, 95.4%) for predicted Co-58 peak concentration as upper and lower values compared to the average data. For the verification of modeling, shutdown chemistry data for RFO 17 was used. Predicted RCS clean-up time with lower and upper values was between 21.05 and 27.58 h, and clean-up time for RFO 17 was 24.75 h, within the predicted time band. Therefore, our calculated modeling band was validated. This approach can be identified that the advantage of the modeling for clean-up time with SDC is that the primary prediction of shutdown chemistry plans can be performed more reliably during shutdown chemistry. This research can contribute to improving the efficiency and safety of shutdown chemistry evolution in nuclear power plants.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.8
• /
• pp.147-158
• /
• 2004

Laboratory dynamic tests are carried out to assess the liquefaction potential of saturated sands in most countries. However, simple results such as the maximum cyclic shear stress and the number of cycles at initial liquefaction are used in the experimental assessment of liquefaction potential, even though various results can be obtained from the dynamic test. In addition, it seemed to be inefficient because more than three dynamic tests with different stress ratio have to be carried out to draw a liquefaction resistance experimental curve. To improve the present assessment method fur liquefaction potential, a new critical resistible characteristic far soil liquefaction is proposed and verified through conventional cyclic triaxial tests with Jumunjin sand. In the proposed method, various experimental data such as effective stress path, stress-strain relationship, and the change of excess pore water pressure can be used in the determination of cumulative plastic shear strains at every 1/4 cycle. Especially, the critical cumulative plastic shear strain to initiate liquefaction can be defined in a specific point called a phase change point in the effective stress path and it can be calculated from a hysteric curve of stress-strain relationship up to this point. Through this research, it is found that the proposed cumulative plastic shear strain can express the dissipated energy to resist dynamic loads and consider the realistic soil dynamic behavior of saturated sands reasonably. It is also found that the critical plastic shear strain can be used as a registible index of soils to represent the critical soil dynamic state, because it seems to include no effect of large deformation.

• Journal of Animal Environmental Science
• /
• v.8 no.1
• /
• pp.9-16
• /
• 2002

This study was conducted to develope the new solid separating system which can be efficiently and economically removed the solid parts in high pollutants concentration of pig slurry. The pollutants concentration, BOD$_{5}$ , COD and SS of the slurry used in this study was 15,990($\pm$2,389)mg/l, 20,004($\pm$5,512)mg/l and 26,486($\pm$5,935)mg/l, respectively. After removal of solid part in slurry, the pollutants concentration, BOD$_{5}$, COD and SS was change into 5,617($\pm$690)mg/l, 5,553($\pm$633)mg/land 1,456($\pm$341)mg/l, respectively in the Fixed biological membrane tank. The reduction of the pollutants concentration of suspend liquid through membrane will be allowed to greatly improve the water purification by an Activated sludge method. This separating system consisted of a temporary storage, a circulating tank and a Fixed Biological membrane tank. A temporary storage which has a draining system of screw type and an aeration device played a tremendous role in draining the solid by filled an aeration of 0.3 l/min. A Fixed Biological membrane tank of which a styrofoam filled in a 2/3 volume as a Biological media was fixed by a stainless steel net (pore size : 0.5mm) to separate the liquid layer of influx in them. The separating system efficiency factors were the speed of screw motor, cycle number of slurries in a circulating tank and moisture contents of solid effluent through the screw path. Although the pollutants concentration was very variable in temporary storage, the final concentration of $BOD_5$ and SS, except COD of the suspended liquid in a Fixed biological membrane were not different regardless of cycle number of a circulating tank. Moisture contents of effluent from temporary storage was 73% under the speed 1 ppm of screw motor and 62% under the 1/4rpm of it.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.3
• /
• pp.199-212
• /
• 2007

If a type IP-2 transport package were to be subjected to a free drop test and a penetration test under the normal conditions of transport, it should prevent a loss or dispersal of the radioactive contents and a more than 20% increase in the maximum radiation level at any external surface of the package. In this paper, we suggested the analytic method to evaluate the structural safety of a type IP-2 transport package using a thick steel plate for a structure part and a bolt for tying a bolt. Using an analysis a loss or dispersal of the radioactive contents and a loss of shielding integrity were confirmed for two kinds of type IP-2 transport packages to transport radioactive waste drums from a waste facility to a temporary storage site in a nuclear power plant. Under the free drop condition the maximum average stress at the bolts and the maximum opening displacement of a lid were compared with the tensile stress of a bolt and the steps in a lid, which were made to avoid a streaming radiation in the shielding path, to evaluate a loss or dispersal of radioactive waste contents. Also a loss of shielding integrity was evaluated using the maximum decrease in a shielding thickness. To verify the impact dynamic analysis for free drop test condition and evaluate experimentally the safety of two kinds of type IP-2 transport packages, free drop tests were conducted with various drop directions. For the tests we examined the failure of bolts and the deformation of flange to evaluate a loss or dispersal of radioactive material and measured the shielding thickness using a ultrasonic thickness gauge to assess a loss of shielding integrity. The strains and accelerations acquired from tests were compared with those by analyses to verify the impact dynamic analysis. The analytic results were larger than the those of test so that the analysis showed the conservative results. Finally, we evaluated the safety of the type IP-2 transport package under the stacking test condition using a finite element analysis. Under the stacking test condition, the maximum Tresca stress of the shielding material was 1/3 of the yielding stress. Two kinds of a type IP-2 transport package were safe for the free drop test condition and the stacking test condition.

• KSBB Journal
• /
• v.24 no.1
• /
• pp.30-40
• /
• 2009

Statistical optimization of the production medium was carried out in order to find an optimal medium composition in itaconic acid fermentation process. Itaconic acid utilized in the manufacture of various synthetic resins is a dicarboxylic acid biosynthesized by fungal cells of Aspergillus terreus in a branch of the TCA cycle via decarboxylation of cis-aconitate. Through OFAT (one factor at a time) experiments, six components (glucose, fructose, sucrose, soluble starch, soybean meal and cottonseed flour) were found to have significant effects on itaconic production among various carbon- and nitrogen-sources. Hence, using these six factors, interactive effects were investigated via fractional factorial design, showing that the initial concentrations of sucrose and cottonseed flour should be high for enhanced production of itaconic acid. Furthermore, through full factorial design (FFD) experiments, negative effects of $KH_2PO_4$ and $MgSO_4$ on itaconic acid biosynthesis were demonstrated, when excess amounts of the each component were initially added. Based on the FFD analysis, further statistical experiments were conducted along the steepest ascent path, followed by response surface method (RSM) in order to obtain optimal concentrations of the constituent nutrients. As a result, optimized concentrations of sucrose and cottonseed flour were found to be 90.4g/L and 53.8g/L respectively, with the corresponding production level of itaconic acid to be 4.36 g/L (about 7 fold higher productivity as compared to the previous production medium). From these experimental results, it was assumed that optimum ratio of the constituent carbon (sucrose) and nitrogen (cottonseed flour) sources was one of the most important factors for the enhanced production of itaconic acid.

• Korean Journal of Labor Studies
• /
• v.23 no.1
• /
• pp.1-45
• /
• 2017

The aim of this study is to analyze the process of the struggle and bargaining for the change of the employment position of the irregular (in-house subcontracted) workers being at work in the Hyundai Motor Company (HMC) plants into the status of the regular employee of the company, and evaluate the results and limitation of the irregular workers' movement. Since the unionization of irregular workers in 2003, they have carried on the struggle against and the bargaining with the HMC, over the past 10 years and more, making claims for abolishing 'illegal temporary agency work' and for converting their positions into the regular ones. The HMC have gradually altered a confrontational stance against the workers' claim at the early stage, into the bargaining relationship with irregular workers' union. Eventually, the collective agreement on the 'special hiring' of about six thousands irregular workers by the HMC was reached in 2016. We attempt to analyze in depth the overall process by dividing three phases of the movement, according to the criteria of the relationship between the alliance and conflict system, and the cycle of protests of irregular workers. Furthermore, we try to trace the long and winding path of the movement, focusing on the cooperation/conflict relationship within the movement's alliance system, the confrontation/bargaining relationship between the movement and the conflict system, and the critical roles played by mediators (or third parties) between two systems. In the conclusion of the paper, we evaluate the results and limitation of the irregular workers' movement upon the basis of the following points; the convergence of the workers' demands into the prime goal of 'becoming HMC's regular employee,' the breakaway of regular workers' union from the movement's alliance system, and a virtual extinction of irregular workers' union after the final labor-management agreement of 2016.

• Sim-seong Yeon-gu
• /
• v.37 no.2
• /
• pp.149-183
• /
• 2022

The oracle of the I Ching, divination can be understood as 'synchronicity phenomenon' in analytic psychology. In order to experience divination actually, it requires a religious attitude that asks questions with a serious mind when a person is in trouble that consciousness reaches its limit. It is not just a passive attitude, but a modest, active attitude to ask what I can do now. The experience of the oracle of the I Ching connected to supra-consciousness is similar to 'active imagination'-talking with the archetype of collective unconsciousness-and is 'the process of finding the rhythm of Self-archetype, the absolute wisdom of unconsciousness.' One month before my father's death, I took care of him who couldn't communicate verbally and I divination with a question 'What can I do for my father and me now?' The I Ching's answer was hexagram 19 Lin 臨, nine at the beginning. It's message was '咸臨貞吉 joint approach. perseverance brings good fortune.' 志行正也 we must adhere perseveringly to what is right.' Through this phrase, I learned the attitude of waiting for life after death as if 'joyful obedient' to the providence of nature that spring comes after winter. And I found that keeping the touching emotion of meeting infinity (in analytical psychological terms, 'Self') with perseveration is to do the true meaning of life beyond popular money-mindedness. And six months before my father's death, I had a dream about the afterlife. In the process of interpreting that dream, I learned not only from the shock of the direct message that 'it is a truth that there is something after death,' but also the regeneration of the mind through introversion from the similarity between the closed ward and '黃泉'-chinese underworld through amplification. And I learned the importance of an open attitude to accept new things through the 'window to eternity' symbolized by the white iron gate. In my father's catholic funeral ritual, I had hope that the catholic doctrine 'Communio Sanctorum'-A spiral cycle in which the living and the dead help each other may be real as well as a symbol of the individuation process in which consciousness and unconsciousness interact in our minds. Through the consolation received through the funeral visit of many people I met in my life, I found the answer that the path to contact with infinity begins with loving the beings in front of me. I tried to understand this continuous experience by the perspective of analytical psychology.