• Transactions of the Korean hydrogen and new energy society
• /
• v.25 no.2
• /
• pp.200-208
• /
• 2014

This paper presents thermodynamic performance analysis of organic Rankine cycle (ORC) using low temperature heat source in the form of sensible energy and using liquefied natural gas (LNG) as heat sink to recover the cryogenic energy of LNG. LNG is able to condense the working fluid at a very low condensing temperature in a heat exchanger, which leads to an increased power output. Based on the mathematical model, a parametric analysis is conducted to examine the effects of eight different working fluids, the turbine inlet pressure and the condensation temperature on the system performance. The results indicate that the thermodynamic performance of ORC such as net work production or thermal efficiency can be significantly improved by the LNG cold energy.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.3
• /
• pp.57-64
• /
• 2010

Uniaxial tensile tests of ETFE membrane are performed in this paper. Three kinds ETFE membrane with different thickness are used in the tests. The tensile strength, the tensile strain at break and the stress-strain curve are obtained from the tests. Futhermore, The cycle loading test of ETFE membrane is carried out through using different values of cycle stress. The residual strain, the relaxation of stress and the change of the elastic modulus of foil are investigated. In the creep test, three kinds of temperature (25, 40 and 60 $^{\circ}C$)and three kinds of stress(3,6and9 MPa) are set respectively and the creep time lasts 24 hours.

• Journal of the Korean Society of Safety
• /
• v.4 no.1
• /
• pp.25-39
• /
• 1989

Cyclic temperature creep tests were carried out an AS 7075 alloy specimens were subjected to a constant load and stepwise temperature cycles in which temperature was fluctuated between 30$0^{\circ}C$ and 25$0^{\circ}C$ with three different cycle ratios. The highest frequency of cycling was 1 cycle per 10 hr and the lowest one was 1 cycle per 12 hr. From the creep experimental results with the above conditions the creep strain under cyclic temperature can be predicted easily by introd ucing the equivalent steady temperature because defined by Eq.(16), but the rupture life is 1.1 time than those of constant temperature because of effect of temperature history at tertiary creep range. Besides thlis result, the results of the creep test under cyclic temperature conditions are respectively compayiea with calculated rupture lives using the life fraction law and Eq.(18). The agreement between the obseried rupture times and calculated ones is fairly good. So creep rupture lives can be respectively predicted using life fraction law and Eq.(18).

• Journal of Sensor Science and Technology
• /
• v.25 no.1
• /
• pp.65-70
• /
• 2016

We devised a method to control the temperature of a liquid bath as low as $-100^{\circ}C$ using the duty cycle control of a solenoid valve. The solenoid valve controls the flow of liquid nitrogen that we used as a cryogen in this system. By controlling the duty cycle of a solenoid valve using feedback from the measured temperature of the liquid bath, we were able to achieve temperature stability within ${\pm}19mK$ around $-100^{\circ}C$. We also demonstrated that by taking average values of the temperature readings for sequence of measurements from more than one thermometer, it is possible to use this system for the calibration of thermometers within 3 mK. This system and the control method can be used for the precise temperature control in the range between $0^{\circ}C$ and $-100^{\circ}C$, where commercially available precision baths are much expensive and hard to be built in customized configurations.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.25 no.1
• /
• pp.1-10
• /
• 2019

Environmental evaluation of two different oxygen high barrier films were performed using life cycle assessment. One of the films (traditional film) was composed of aluminum oxide coated PET film, ink, LDPE and LLDPE. Another film (new film) was consists of PET, ink, protein based coating material, LDPE, LLDPE. Main layer to achieve the high oxygen barrier for traditional film was aluminum oxide coated PET film, whereas the protein based coating material act as oxygen barrier layer for new film. Functional unit of this study was 1000 pouches made of traditional and new film. System boundary was factory to gate. The results of this study revealed that the new film shows better environmental performance for most of impact indicator than traditional film, except marine eutrophication and fine particulate matter formation due to extra coating process in new film system.

• Journal of Energy Engineering
• /
• v.25 no.2
• /
• pp.52-64
• /
• 2016

The production of nuclear energy from thorium which is non-fissile material was a main issue until the middle of 1970's, because of the thorium's abundance as energy resources, its capability of breeding fissile material U233, and the reduction of long-lived actinides. However, to use thorium as nuclear fuel, some obstacles such as the necessities of external neutron source and long-term neutron irradiation for effective breeding, and the production of high radioactive isotopes in the course of thorium breeding cycle should be overcome. The difficulties to resolve these cons of thorium cycle became the reason of interruption of the related researches in the middle of 1970's. But in the 21st century, the change of societal perspective regarding nuclear energy and the appearance of accelerator-driven nuclear reactor shift those cons into pros and rehabilitate the study of thorium. The high activity of thorium cycle turned out to be a good option as higher resistance and easier detectibility of nuclear proliferation and the employment of subcritical accelerator-driven reactor as external neutron sources is considered to enhance the nuclear safety. In this study we compare the thorium cycle with the currently-used uranium cycle and analyze the technical status and perspective of thorium researches which use accelerator-driven reactors.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.21 no.1
• /
• pp.19-37
• /
• 1995

A fine oil -in-water (O/W) emulsion using non-aqueous emulsification technique was developed. And the behaviors of POE(25)octyldodecyl ether in non-aqueous polyol/oil systems were studied by observing the surface tension, interfacial tension, turbidity and transition temperature. It was found that POE(25)octyldodecy1 ether hardly existed as the micelle in the non-aqueous polyol system while, in water, it formed micelles very easily. So, when a polyol, like glycerine in which POE(25)octyldodecyl ether has a poor solubility, was added, POE(25)octyldodecyl ether moved to the surface. After saturated at surface, POE(25)octyldodecyl ether began to precitate. The mean particle size of the final emulsion was 230nm. Also, the emulsion system was stable at 0$^{\circ}C$, 25$^{\circ}C$, 40$^{\circ}C$, 50 $^{\circ}C$ and freeze-thaw cycle chamber for a month, while a conventional emulsion system was unstable. It is concluded that, by pertinent combination of polyols, we can improve the adsorption efficiency of surfactant.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.4
• /
• pp.417-423
• /
• 2014

The purpose of this study was to compare two saddle height determination methods by the effectiveness of pedal reaction force. Ten male subjects (age: $24.0{\pm}2.4years$, height: $175.1{\pm}5.4cm$, weight: $69.3{\pm}11.1kg$, inseam: $77.8{\pm}4.5cm$) participated in three minutes, 60 rpm cycle pedaling tests with the same load and cadence. Subject's saddle height was determined by $25^{\circ}$ knee flexion angle (K25) when the pedal crank was at the 6 o'clock position (knee angle method) and 97% (T97), 100% (T100), 103% (T103) of trochanter height (trochanteric method). The RF (resultant force), EF (effective force), and IE (index of effectiveness) were compared by measuring 3D motion and 3-axis pedal reaction force data during 4 pedaling phases (phase1: $330^{\circ}-30^{\circ}$, phase2: $30^{\circ}-150^{\circ}$, phase3: $150^{\circ}-210$, phase4: $210^{\circ}-330^{\circ}$). Results showed that there were significant differences in EF at phase1 between T97 and K25, in EF at phase4 between T100 and T103, in IE at total phase between T97 and K25, between T100 and T103, in IE at phase1 & phase2 between T97 and K25. There was higher IE in the K25 than any other saddle heights, which means that K25 was better pedaling effectiveness than the trochanteric method. Therefore it was suggested the saddle height as 103.7% of trochanter height that converted from K25.

• Journal of the Korean Child Neurology Society
• /
• v.25 no.3
• /
• pp.204-207
• /
• 2017

Hyperornithinemia-hyperammonemia-homocitrullinuria syndrome (HHH syndrome) is a neurometabolic disorder with highly variable clinical severity ranging from mild learning disability to severe encephalopathy. Diagnosis of HHH syndrome can easily be delayed or misdiagnosed due to insidious symptoms and incomplete biochemical findings, in that case, genetic testing should be considered to confirm the diagnosis. HHH syndrome is caused by biallelic mutations of SLC25A15, which is involved in the urea cycle and the ornithine transport into mitochondria. Here we report a boy with spastic paraplegia and asymptomatic younger sister who have compound heterozygous mutations of c.535C>T (p.R179^*) and c.116C>A (p.T39K) in the SLC25A15 gene. We identified that p.T39K mutation is a novel pathogenic mutation causing HHH syndrome and that p.R179^*, which is prevalent in Japanese and Middle Eastern heritage, is also found in the Korean population.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.136-137
• /
• 2009

전자파 차폐재로 메쉬를 제작하는 기존의 배치 방식은 복잡한 작업공정과 비싼 설비로 인해 생산원가 높다. 그래서 pulse reverse current를 이용하여 Cu mesh 도금을 하였다. 정펄스의 전류밀도가 $31mA/cm^2$일일 때 역펄스의 전류밀도 및 duty cycle에 상관없이 표면은 매끄럽게 나왔다. 정펄스의 전류밀도가 $454mA/cm^2$일때는 duty cycle이 25%이하는 표면상태가 매끄럽게 나타났지만 33%이상에서 표면상태가 거칠게 도금이 되었다.