• 한국대기환경학회지
• /
• 제7권3호
• /
• pp.208-218
• /
• 1991

To compare the resistance of landscape trees by acid rain, simulated acid rain was treated on the seeds of 6 coniferous species (Pinus densiflora, Pinus thunbergii, Pinus koraiensis, Taxus cuspidata, Cedrus deodara, Thuja occidentalis) and 6 broad-leafed species (Ligustrum obtusifolium, Acer Buergerianum, Acer Ginnala, Styrax obassia, Cornus Kousa, Magnolia obovata). The experimental design of randomized block arrangement with three replications was implemented in the experimental field of Yesan National Agri-Tech Junior College. The seeds of 12 tree species were planted on the nursery soil in the early spring of 1991. The regime of artificial acid rain, in terms of spray frequency per monthly and spray amount at year records. Simulated acid rain (pH 2.0, pH 4.0, pH 5.6 as control) containing sulfuric and nitric acid in the ratio of 3:2 (chemical equivalant basis) diluted ground water, were treated on the experimental plants under condition of cutting off the natural precipitation with vinyl tunnel, during the growing season (April 8 to August 31) in 1991. Seedling establishment, seedling growth and nutrient contents in needles and leaves were measured and compared among the treatment. The results were summerized as follows; 1. In general, coniferous species were more resistant than broad-leafed species in the resistant comparisons of landscape trees by simulated acid rain. But there were resistant tree species to acid rain among the broad-leafed species. 2. Among 6 coniferous species used in this experiment, Pinus densiflora, Pinus koraiensis, Taxus cuspidata, Cedrus deodara and Pinus thunbergii revealed the resistant tree species to acid rain. But Thuja occidentalis was very susceptible to acid rain, because of no germination in pH 2.0 treatment plot of acid rain. 3. Among 6 broad-leafed species used in this study, Magnolia obovata, Styrax obassia and Ligustrum obtusifolium showed relative resistant tree species to acid rain. But Acer Buergerianum, Acer Ginnala and Cornus Kousa were very susceptible to acid rain, because of no germination in pH 2.0 plot of acid rain treatment.

• 생물환경조절학회지
• /
• 제6권3호
• /
• pp.225-234
• /
• 1997

제주지방의 소귀나무 자생지 분포조사와 방법을 구명하기 위한 삽목 번식 및 종자 번식에 대한 시험결과를 요약하면 다음과 같다. 1. 자생지 분포는 서귀포시 영천동과 남제주군 남원읍 하례 2리를 경계하고 있는 효돈천 및 동홍천을 중심으로 해발 100~400m에 집중적으로 분포되어 있었다. 2. 삽목에서 발근을 촉진하기 위하여 BA, IBA, Kinetin, IAA, GA$_3$ 등을 처리하였으나 발근 발아가 되지 않았다. 3. 발근저해물질인 탄닌 성분을 제거하기 위해 AgNO$_3$를 처리한 다음 BA, lBA, Kinetin 처리에서도 역시 발근은 되지 않았다. 4. 종자를 4$0^{\circ}C$에서 30일간 처리한 것이 39%의 발아율을 나타냈다. 5. 소귀나무 어린묘의 잎의 형태와 성목의 잎의 형태가 완전히 다르게 전개되는 특성을 보였다.

• 한국식품영양과학회지
• /
• 제6권1호
• /
• pp.55-59
• /
• 1977

The consumption of sugar in our diet increased so great that much U. S. dollars are spended to import sugar source from foreign contries. To replace a part of it we adopted mother plant and seeds of the well-known Stevia (Stevia rebaudiana Bertoni M.) originated from south America, from the Agricultural Experimental Station of Hokkaido, Japan, in 1974. In order to determine the growth condition of Stevia in our climate and soil condition, the results of survey and determination were as follows: 1. Germination rate of Stevia was averaged 33.6% at 35 th day after seedling and the maximum germination period was between 5 and 20 days after seedling. 2. The seedling rate of Stevia was about 8%. 3. Establishment of roots of Stevia propagated by cutting method was above 90% but only S-1 strain showed lower rate., 75%. 4. S-2 strain showed the best growth rate that was about 160cm by plant height and it was decreased by the following order : S-4, S-3, S-1, S-6 and S-5 strains. 5. S-4 strain resulted in 45 branches that was the highest number among strains tested and S-2 strain was the next. 6. The content of sweetening compound of Stevia, stevioside, was 5.3% in S-1, S-2, S-5 and S-4 strains but S-3 and $S^*$-6 strains were relatively low content, 4.9%. From the above results we obtained Stevia could be propagated by cutting method and the growth conditions including plant height, number of branches and content of stevioside were relatively better in S-2 and S-4 strains that were differentiated by the shape of leaf.

• 한국산림과학회지
• /
• 제105권1호
• /
• pp.42-47
• /
• 2016

천연활엽수림의 천연갱신 가능성을 파악하고자, 당단풍나무의 개화 결실, 종자낙하, 종자활력을 강원도 평창군 중왕산 지역에서 2009년부터 2015년까지 조사하였다. 당단풍나무 꽃은 산방화서에 양성화와 웅성화가 달렸으며, 화서 내에서 성형태간 개화시기가 달랐다. 양성화가 먼저 개화하는 개체에서는 암술이 수분되어 자라기 시작한 꽃에서는 수술은 더 이상 성숙하지 않고 소실되었으며, 웅성화가 먼저 개화하는 수술이 발달한 꽃에는 암술은 흔적으로만 존재하였다. 다른 개체에서의 화분이 꿀벌, 애꽃벌류 및 꽃등에류에 의하여 수분이 이루어지는 이형자웅이숙(heterodichogamy)의 성 형태로 자가수분을 회피하는 기작을 가지고 있었다. 종자 낙하량은 310~234,840 ea/ha의 범위로 평균은 70,780 ea/ha이었다. 종자생산에 있어 연년변동이 심하며, 최대치가 최소치의 760배 가량이었다. 당단풍나무의 연년종자생산은 정규분포하는 것이라 사료된다. 성숙한 종자 중에서 피해 또는 부후종자가 59.3%로 가장 많았고, 건전종자가 23.9%, 미발육 종자 9.2%, 쭉정이종자 7.6% 등으로 나타났다. 건전종자 생산량을 좌우하는 요인은 개화기인 5월 중,하순에 화분매개충의 활동과 어린 자방이 자라는 시기에 흡즙성 해충의 밀도와 활동성이 가장 중요한 요인이라 사료된다. 당단풍나무의 천연갱신은 종자풍년 이듬해에 발아와 생장에 유리한 조건을 갖춘 갭에서 이루어질 것으로 사료된다. 낙엽활엽수의 천연갱신을 이해하기 위해서 개화결실 특성과 비산 전후 종자 피식 문제에 대한 장기간의 연구가 필요할 것이라 사료된다.

• 한국산림과학회지
• /
• 제103권2호
• /
• pp.153-158
• /
• 2014

천연활엽수림의 천연갱신 가능성을 파악하고자, 부게꽃나무(Acer ukurunduense Trautv. & C.A. Mey.)의 개화 결실, 종자낙하, 종자활력을 강원도 평창군 중왕산 지역에서 2009년부터 2013년까지 조사하였다. 부게꽃나무 꽃은 총 상화서(드물게 원추화서)에 양성화와 웅성화가 많이 달렸으며, 꽃의 배열은 화서마다 서로 달랐다. 화서 내에서 성형태간 개화시기가 달랐다. 양성화로 암술이 수분되어 자라기 시작한 꽃에서는 수술은 더 이상 성숙하지 않고 소실되었으며, 수술이 발달한 꽃에는 암술은 흔적으로만 존재하였다. 부게꽃나무는 꿀벌, 깜둥이창나방, 하늘소류, 애꽃벌류, 대모각다귀류 등이 수분하며, 자가수분을 회피하는 기작을 가지고 있다고 사료된다. 화서당 꽃의 수는 6월 8일에 189개였다가, 6월 21에는 과수당 시과?의 수는 41.2개였으며, 9월 5일에는 과수당 33.4개로 줄어들었다. 시과낙하량은 670~17,930 ea/ha의 범위로 평균은 6,720 ea/ha이었다. 건전배를 가진 것이 43.2%로 가장 많았고, 다음으로 피해 부후인 것이 41.8%, 미발육 10.2%, 쭉정이배 4.8%로 나타났다. 건전종자 생산량을 좌우하는 요인은 개화기인 6월 초순에 화분매개충의 활동과 어린 자방이 자라는 6월 초 중순 흡즙성 해충의 밀도와 활동성이 가장 중요한 요인이라 사료된다. 부게꽃나무의 천연갱신은 종자다산해에 발아와 생장에 유리한 조건을 갖춘 갭에서 이루어질 것으로 사료된다. 단풍나무류의 천연갱신을 이해하기 위해서 종자결실과 비산전 후 종자피식 문제에 대한 장기간의 연구가 필요할 것이라 사료된다.

• 한국육종학회지
• /
• 제40권3호
• /
• pp.278-285
• /
• 2008

${\bullet}$ 국내 품종에 적합한 콩 형질전환 방법을 확립하기 위해 배축 절단 방법을 새롭게 개발하였으며 이 방법을 통해 목적 유전자가 콩 분열조직에 안정적으로 도입되고 선발 과정을 거쳐 형질전환 식물체를 작성할 수 있었다. ${\bullet}$ 콩 형질전환체의 도입유전자 copy 수는 1~2개이고 세대 진전에 따라 도입유전자가 안정적으로 유전되고 있음을 확인하였다. ${\bullet}$ 이러한 결과를 바탕으로 배축 절단 방법을 사용하여 우리나라 환경에 적합한 우수한 형질전환 콩 품종을 신속하게 개발할 수 있을 것으로 기대된다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.298-298
• /
• 2022

Milling is an important process that determines the quality of flour and is affected by milling machine type, scale, and tempering conditions. In addition, seed hardness is an important factor in determining the amount of tempering water and has been reported to affects flour yield and flour quality. There are reports that vitreousity is used as a measure to distinguish between soft and hard seeds, and the higher the vitreousity, the higher the protein contents. However, there is no established system for measuring viterousity of seeds and studies on the vitreousity and quality characteristics of flour are insufficient. Therefore, in this study, vitreousity, hardness, and milling characteristics were evaluated for 46 major domestic varieties, and their relationship was confirmed. After cutting the seeds using a seed cutter, vitreousity was measured, and seed hardness and flour particle size was measured using SKCS and PSI, respectively. As for the seed hardness index, 'Joa' was the lowest with 11.6, 'Yeonbaek' was the highest with 78.7. As for the milling yield, 'Saeol' had the lowest at 58.1%, and 'Hcjoong' had the highest at 88.6%. Seed hardness index and wheat flour production showed a high positively correlation, showing a similar to that of previous studies. Also, in flour particle size, 'Gobun' was the largest at 75.5 pm, and 'Joa' was the smallest at 43.1 um. Flour yield and flour particle size showed a high positively correlation. As a result of vitreousity, 'Hwangeumal' (55.2%), 'Saekeumkang' (59.1%), 'Baekkang' (52.3%), 'Goso' (44.6%), and 'Joa' (19.2%) were showed. Seed hardness and vitreousity showed a high positively correlation. Also as the vitreousity increased, the flour yield also showed a tendency to increase. In addition, as the seed hardness increased, particle size of the flour yield also showed a tendency to increase. It is thought that this result can be used as a measure to determine the quality of flour with vitreousity. However, further analysis of wheat varieties and methods of analyzing vitreousity are needed.

• 한국자원식물학회지
• /
• 제8권2호
• /
• pp.143-151
• /
• 1995

The development of medicinal plants for cut plants and landscape plants were conducted through the literiture survey. The results were as follows: We selected 38 species of medicinal plants including 7 medicinal woody plants for cut plant and landscape plants from 450 medicinal plants. There were 8 species of Compositae, 4 species Ranunculaceae, 3 species Rosaceae and Umbelliferae, 2 species Polygonaceae and Campanulaceae respectively. The anthesis of Cornus officinalis, Magnolia denudata, Forsythia koreana of medicinal woody plants flowering before leaf spreading come to early than the anthesis of other medicinal plants. There were 4 species(11%) over 10cm of the flower diameter, 6 species(16%) over 5cm below 10cm, 19 species(50%) over 1cm below 5cm and 9 species(24%) 1cm below. In terms of flower color, 11 species(29%) were white, 9 species(24%) yellow, 6 pecies(16%) red, 5 species(13%) violet and 3 species(8%) were blue aided violet. In terms of the flowering by month, 12 species(32%) on July, 9 species(24%) on May, 6 species(16%) on June and August respectively, and 3 species(8%) on March. The most medicinal plants were propagated by division and seeding easily, but woody medicinal plants of 7 species of this study were propagated by cutting and grafting easily. The percentage of usage of parts of medicinal plants including woody medicinal plants was that roots were 20 species(53%), flowers 6 species(16%), fruits and all part of medicinal plants were 4 species(11%), and seeds and stem including leaves 2 species(5%) respectively.

• Journal of Biosystems Engineering
• /
• 제34권6호
• /
• pp.420-424
• /
• 2009

Since the sesame pod gets open gradually from the lower to upper parts of the stem due to its different maturity during cutting and binding of sesame, at the conventional work for shattering, the procedures of drying and shattering are repeated two or three times. Therefore, in this study, a drying stand with transparent plastic cover was developed to complete the drying and shattering at the same time. Owing to the developed drying stand, simple drying work, the area for drying was reduced prevention of sesame seeds from loss and rain are available. The performance of developed drying stand was evaluated. Before the drying stand was developed, the conventional method and shattering machine for shattering sesame required at least three times of operation for complete shattering. But After drying stand was developed, the complete shattering works was possible with only one time shattering operation. Finally, the developed drying stand could prevent approximately 5% of the total sesame seed production from loss during drying and shattering works.

• 한국작물학회지
• /
• 제36권6호
• /
• pp.540-544
• /
• 1991

유채의 협열개에 관한 기초자료를 얻고자 strain gauge를 이용하여 예취 후의 건조 중에 있는 유채 양질의 협열개 난역도를 측정하였던 바 다음과 같은 결과를 얻었다. 1. 협실의 발육에서 협은 개화 후 3-4일째에는 육안으로 볼 수 있었으며, 협장은 20일째 중에, 종자의 장경은 35일째에 최대에 달했고, 40일째 쯤에는 종자가 거의 구형으로 되었으며, 45일째 쯤에는 협의 굵기가 최대에 달했다 2. 예취 후의 협실수분함량의 추이는 예취 당시가 70%였고 house내에서 5일정도 건조한 결과는 30%에 달했고 14일째까지는 10%정도였다 3. 협열개 난역도는 협실수분함량이나 상대습도에 대응한 일변화가 보였으며 협실수분함량 및 상대습도가 낮을 수록 협열개가 어려웠다.