• 한국초지조사료학회지
• /
• 제17권4호
• /
• pp.407-414
• /
• 1997

In this study, the optimum cutting 6equency and level of mineral nitrogen fertilization were investigated for the production of Reed canarygrass in uncultivated rice paddy. The results are summarized as follows; 1. Higher relative dry matter yields were recorded in 2nd cut of plots with 3 and 5 cutting frequencies, and 3rd cut of plot with 4 cutting kquency, respectively. 2. With no nitrogen fertilization, mean dry matter yields per year were 6.2~7.6 tonsha and the highest yield appeared in plot with 4 cutting 6equency. 3. The increased fertilization of mineral nitrogen resulted in the increased dry matter yield. Significantly higher dry matter yields than that of no nitrogen fertilization were recorded in fertilization of 90 kg nitrogen per year in 3 cutting fequency, 240 kg in 4 cutting frequency and 150 kg in 5 cutting 6equency respectively. 4. Efficiency of dry matter production with nitrogen fertilization(kg DMkg N) was higher in 30kg Nhalcut in 3 and 5 cutting eequency, 60kg Nhalcut in 4 cutting 6equency respectively. In each cutting kequency, the higher efficiency of dry matter production appeared in 1st cut in 3 cutting kequency, and 2nd cut in 4 and 5 cutting 6equency respectively. 5. Economic N level(kg/ha) was 179.5~242.3kg/ha in 3 cutting 6equency, and 189.6-241.6kg/ha and 167.0 ~253.2kg/ha in 4 and 5 cutting 6equency respectively, and marginal dry matter yields were 11.4~ 12.3 tons/ ha, 11.2 ~ 11.8 tons/ha and 8.3 ~9.1 tons/ha in 3, 4 and 5 cutting 6equency respectively. 6. The limiting N fertilization level to the highest dry matter were estimated to be 569.9kg/ha, 492.4kg/ha and 654.lkg/ha in 3, 4 and 5 cutting kequency respectively.

• 한국전기전자재료학회논문지
• /
• 제31권5호
• /
• pp.295-299
• /
• 2018

In this work, we conducted a study on cell strings of high efficiency and high power solar cell modules via simulation. In contrast to the conventional module manufacturing method, the simulation was performed by connecting cutting cells divided into four parts from 6-in size using the electrically conductive adhesive (ECA). The resistance of the ECA added in series connection was extracted using an experimental method. This resistance was found to be $3m{\Omega}$. Based on this simulation, we verified the change in efficiency of the string as a function of the number of cutting cell connections. Consequently, the cutting cell efficiency of the first 20.08% was significantly increased to 20.63% until the fifth connection; however, for further connections, it was confirmed that the efficiency was saturated to 20.8%. Connecting cutting cells using ECA improves the efficiency of the string; therefore, it is expected that it will be possible to fabricate modules with high efficiency and high power.

• Applied Science and Convergence Technology
• /
• 제23권5호
• /
• pp.221-239
• /
• 2014

The global demand for energy has been increasing since past decades. Various technologies have been working to find a suitable alternative for the generation of sustainable energy. Photovoltaic technologies for solar energy conversion represent one of the significant routes for the green and renewable energy production. Despite of remarkable improvement in solar cell technologies, the generation of power is still suffering with lower energy conversion efficiency, high production cost, etc. The major problem in improving the PV efficiency is spectral mismatch between the incident solar spectrum and bandgap of a semiconductor material used in solar cell. Luminescent materials such as rare-earth doped phosphor materials having the quantum efficiency higher than unity can be helpful for photovoltaic applications. Quantum cutting phosphors are the most suitable candidates for the generation of two or more low-energy photons for the absorption of every incident high-energy photons. The phosphors which are capable of converting UV photon to visible and near-IR (NIR) photon are studied primarily for photovoltaic applications. In this review, we will survey various near IR quantum cutting phosphors with respective to their synthesis method, energy transfer mechanism, nature of activator, sensitizer and dopant materials incorporation and energy conversion efficiency considering their applications in photovoltaics.

• Nuclear Engineering and Technology
• /
• 제55권5호
• /
• pp.1830-1837
• /
• 2023

The thermal cutting of contaminated or activated metals during decommissioning nuclear power plants inevitably results in the release of radioactive aerosol. Since radioactive aerosols are pernicious particles that contribute to the internal dose of workers, air conditioning units with a HEPA filter are used to remove radioactive aerosols. However, a HEPA filter cannot be used permanently. This study evaluates the efficiency and lifetime of filters in actual metal cutting condition using a plasma arc cutter and a high-resolution aerosol detector. The number concentration and size distribution of aerosols from 6 nm to 10 ㎛ were measured on both the upstream and downstream sides of the filter. The total aerosol removal efficiency of HEPA filter satisfies the standard of removing at least 99.97% of 0.3 ㎛ airborne particles, even if the pressure drop increases due to dust feeding load. The pressure drop and particle size removal efficiency at 0.3 ㎛ of the HEPA filter were found to increase with repeated cutting experiments. By contrast, the efficiency of used HEPA filter reduced in removing nano-sized aerosols by up to 79.26%. Altogether, these results can be used to determine the performance guidance and replacement frequency of HEPA filters used in nuclear power plants.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.585-591
• /
• 1997

The purpose of this experiment is to verify and efficiency of repair for cutting area. The result of this experiment is the fact thar the strength of compression and bending in declined by width and depth of cutting area. Deterioration of strength depends on depth to be repair area the strength of compression decreased up 50% when the repairing area is the fact that it is emerged by the increased of depth size rather than width size.

• 한국농공학회지
• /
• 제18권2호
• /
• pp.4096-4104
• /
• 1976

This experiment was carried out to investigate the efficient turning method which will be able to use every cutting methods, to calculate the width of the center field which must transpose from rotary cutting method to return cutting method, to investigate the effects of L/W and unit field on the operation efficiency. The results are summarized as follows: 1. In case of cutting in the outer field, the efficient turning method is the "$\alpha$" type turning method (half U-shaped turning method) at the first rotation, is the "$\beta$" type turning method (T-shaped turning method) at the second to fourth rotation. 2. In case of cutting in the inner field, the efficient turning method which takes the least turning time is the "a" type turning method ($\Delta$-shaped turning method). 3. The width of the center field (W') changes by the length-width ratio (L/W) and width (W), W' is 9.0m in case that L/W is 2.5 and W is 30m. 4. The larger L/W and area of unit field (A) become, the more operation efficiency (E) increases, and the limits that E is affected signicantly by L/W is 2 to 3.5 and A is within 5,000$m^2$. within 5,000$m^2$.

• 유기물자원화
• /
• 제4권1호
• /
• pp.33-42
• /
• 1996

예취빈도와 액상구비의 시용수준에 대한 Reed canarygrass의 반응을 조사하여, 잠재생산성의 증대를 위한 경제적이고 합리적인 적정 예취빈도와 액상구비의 시용수준을 추정하고자 하였다. 예취빈도별 연간 건물수량에 대한 예취번초의 상대수량은 3회 예취구에서 2번초, 4회 예취구에서 3번초 및 5회 예취구에서는 4번초에서 다른 예취번초에 비해 가장 높은 상대수량을 나타내었다. 무시용구의 연간 건물수량은 예취빈도에 따라 6.4~7.5 ton/ha의 범위를 나타내었으며, 3회 예취구에서 가장 많은 연간 건물수량을 나타내었다. 액상구비의 시용수준이 증가됨에 따라서 연간 건물수량은 증가되었다. 즉, 3회 예취구에서는 연간 180 kg, 4회 예취구에서는 연간 120 kg 및 5회 예취구에서는 연간 300 kg로 증시하였을 때, 무시용구에 비해 유의하게 높은 건물수량을 나타내었다. 액상구비의 건물생산효율 (kg DM/kg N)은 3회 예취구의 120 kg/ha/cut, 4회 예취구의 30 kg/ha/cut 및 5회 예취구의 90 kg/ha/cut에서 각각 16.8, 25.4 및 10.4 kg 의 가장 높은 건물을 생산하였고, 시용시기에 따른 건물생산효율은 3회 예취구에서 1번초, 4회와 5회 예취구에서는 2번초에서 가장 높았다. 경제적 액상구비의 질소시용수준은 3회 예취구에서 462.7~525.3 kg/ha, 4회 예취구에서 353.1~423.2 kg/ha 그리고 5회 예취구에서 380.1~424.4 kg/ha의 범위를 나타내었다.

• 터널과지하공간
• /
• 제21권6호
• /
• pp.508-517
• /
• 2011

선형절삭시험은 실제 TBM에 장착되는 디스크커터를 사용하여 암석을 절삭하는 시험으로 디스크 커터의 암석절삭성능을 평가할 수 있는 가장 정확하고 신뢰도가 높은 시험 중 하나이다. 시험을 통해 디스크커터에 작용하는 작용력과 암석 절삭 부피 등을 정량적으로 측정할 수 있으며 선형절삭시험 결과는 TBM 커터헤드의 설계에 필요한 핵심인자(수직력, 회전력, 최적절삭간격 등)를 결정하는데 직접적으로 활용될 수 있다. 국내에서도 LCM시험시스템이 구축되어 국내 대표 암종에 대한 선형절삭시험이 수행된 바 있으나 국내에서 수행된 일련의 선형절삭시험은 등방성 암석에 초점을 맞추어 수행되었다. 하지만 이방성 암반을 굴착하는 TBM 커터헤드의 설계 시에는 암석의 절삭효율과 디스크 커터의 절삭성능에 미치는 대상 이방성암반의 영향을 고려하는 것이 매우 중요하다. 본 연구에서는 이방성 암석의 편리각이 TBM의 절삭성능에 미치는 영향을 알아보기 위하여 두 개의 다른 편리각을 가지는 아산편마암을 대상으로 압입깊이와 커터간격을 변화시켜가며 다양한 절삭조건하에서 선형절삭시험을 수행하였다. 시험결과는 암석의 이방성은 디스크커터에 의한 암석의 절삭효율 및 절삭성능에 큰 영향을 미치는 것으로 나타났으며 특히 이방성 각도에 따른 암석의 강도 변화는 TBM의 절삭성능을 예측하는데 있어 고려되어야 할 중요인자임을 확인할 수 있었다.

• 대한기계학회논문집
• /
• 제19권7호
• /
• pp.1555-1562
• /
• 1995

This study represents the non-dimensional cutting force model. With the non-dimensional cutting force model it is possible to estimate efficiently the maximum cutting force during one revolution of cutter. Using the non-dimensional cutting force model, the feed rate and spindle speed are adjusted so as to satisfy the maximum cutting force and maximum machining error. To verify the accuracy and efficiency of the non-dimensional cutting force model, a series of experiments were conducted, and experimental results proved and verified the non-dimensional cutting force model. The NC toolpath verification system developed in this paper uses the non-dimensional cutting force model, so that it is effective for calculating the cutting force and adjusting the cutting conditions.

• 한국산업융합학회 논문집
• /
• 제7권4호
• /
• pp.419-424
• /
• 2004

In order to increase the efficiency of the sawdust machine, the helical type drums with an oblique cutting condition (3D) were developed. The preexisting drums have an orthogonal cutting condition (2D) considering of a saw cutter and a wood cutting pattern. Unfortunately, the disadvantages of this type drum are the big cutting resistance, the high cost of a cutting power and the extreme occurrence of a vibration. To improve this shortcoming, the helical type drum with an oblique cutting condition was developed. Therefore, this type drum decreased the vibration and the cutting resistance of the sawdust machine, and also improved the productivity of 30% or more and the porosity of the sawdust.