• 한국전문물리치료학회지
• /
• 제12권4호
• /
• pp.33-40
• /
• 2005

The purpose of this study was to define more precisely the anatomy of the thumb flexor pulley system and to determine the relative contribution of each of the pulleys to the biomechanics of thumb motion at the metacarpophalangeal (MP) and interphalangeal (IP) joints. For this, 22 hands from 11 cadavers were used and randomly assigned to two groups. In the first group, the first annular (A1) pulley was cut first followed by the variable annular (Av) pulley and then the oblique pulley. In the second group, the oblique pulley was cut first followed by the, pulley and then the Av pulley. In 7 of 22 hands, it was a transverse structure parallel to the, pulley with a gap between the A1 and Av pulleys, referred to here as type I. In 9 hands, the A1 and Av pulleys were connected without any gap (type II). In 6 hands, the space between the A1 and Av pulleys were triangular in shape with fibers of the Av pulley converging toward the radial side (type III). In biomechanical study of both first and second experiments, there was no significant difference in MCP joint flexion between the all intact, A1 section, A1/Av section, A2 intact (A1/Av/oblique section), and no pulley configuration (p>.05). In occurring displacements less than 10 mm, there was no significant difference in IP joint flexion (p>.05). However, there was a significant decrease in IP joint flexion occurred in both 15 mm and 20 mm excursion (p<.05), when the oblique pulley was resected additionally after cutting the A1 and Av pulleys in first experiment, and when the A1 pulley was resected additionally after cutting the oblique pulley. According to the results, the injury of only the oblique pulley does not decrease thumb motion significantly. The oblique pulley injury with both the A1 and Av pulleys laceration decreased thumb motion significantly. The additional laceration of the A2 pulley does not decrease thumb motion.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권3호
• /
• pp.1129-1133
• /
• 2015

Background: The tissue microarray (TMA) is widely accepted as a fast and cost-effective research tool for in situ tissue analysis in modern pathology. However, the current automated and manual TMA techniques have some drawbacks restricting their productivity. Our study aimed to introduce an improved manual tissue miniarray (TmA) technique that is simple and readily applicable to a broad range of tissue samples. Materials and Methods: In this study, a conventional TV/radio telescopic antenna was used to punch tissue cores manually from donor paraffin embedded tissue blocks which were pre-incubated at $40^{\circ}C$. The cores were manually transferred, organized and attached to a standard block mould, and filled with liquid paraffin to construct TmA blocks without any use of recipient paraffin blocks. Results: By using a conventional TV/radio antenna, it was possible to construct TmA paraffin blocks with variable formats of array size and number ($2-mm{\times}42$, $2.5-mm{\times}30$, $3-mm{\times}24$, $4-mm{\times}20$ and $5-mm{\times}12$ cores). Up to $2-mm{\times}84$ cores could be mounted and stained on a standard microscopic slide by cutting two sections from two different blocks and mounting them beside each other. The technique was simple and caused minimal damage to the donor blocks. H&E and immunostained slides showed well-defined tissue morphology and array configuration. Conclusions: This technique is easy to reproduce, quick, inexpensive and creates uniform blocks with abundant tissues without specialized equipment. It was found to improve the stability of the cores within the paraffin block and facilitated no losses during cutting and immunostaining.

• 인터넷정보학회논문지
• /
• 제12권6호
• /
• pp.171-187
• /
• 2011

스마트폰의 활성화로 인해 모바일 혁명이 불고 있다. 모바일 혁명은 SNS 서비스를 단순한 커뮤니케이션 도구에서 소셜커머스의 확산에 매우 중요한 수단으로 만들었다. 하지만 최근 많은 관심을 받고 있는 국내 소셜커머스 시장에서 SNS가 어떠한 역할을 하는지에 관한 연구는 아직까지 미비한 실정이다. 따라서 본 연구의 목적은 국내 소셜커머스의 다양한 특성들이 소셜커머스의 구매의도에 어떠한 영향을 미치며, SNS가 어떠한 효과가 있는지를 알아보는 것이다. 이를 위해 본 연구에서는 국내 외 기존 연구를 바탕으로 소셜커머스 특성을 비용절감, 충동구매, 사회적영향, 의사결정지원, 구전효과 등으로 도출한 후 SNS 활용정도와의 상호작용 효과를 검정하였다. 회귀분석결과 모든 소셜커머스 특성은 종속변수에 유의한 것으로 나타났다. 또 SNS 활용정도와의 상호작용 효과 검정 결과 비용절감과 구전효과가 SNS를 많이 활용할수록 소셜커머스 활성화에 유의한 영향을 주는 것으로 나타났다. 결국 본 연구의 의의는 소셜커머스 특성과 SNS와의 관계를 살펴봄으로써 소셜커머스 사업자의 전략 수립을 위한 단초를 제공했다는 데에 있다.

• 한국산학기술학회논문지
• /
• 제10권12호
• /
• pp.3824-3832
• /
• 2009

본 연구에서는 과연 근무시간에 '블로그' 사용하는 것이 업무의 성과에 도움을 주는 것일까? 라는 질문에 대한 해답을 구하고자 하였다. 이를 위해 다음을 분석하였다. 첫째, 블로그 사용의도 즉, 상호작용성, 정보추구성, 오락 추구성 등을 독립변수로, 업무만족도를 종속변수로 설정하고 연구모형을 수립하고 블로그 사용요인과 업무 만족도의 관계를 분석하였다. 둘째, 근무시간에 블로그를 사용하는 이유는 업무특성에 따라 다를 수 있다는 가정 아래 업무특성 요인을 정형/비정형업무, 개인업무/집단업무, 재석업무/이석업무로 구분지었으며, 각각의 종사자들의 응답을 그룹화지어 더미변수화 하여 독립변수(블로그 사용요인)와 종속변수(업무만족도)에 조절효과가 있는지 분석하였다. 분석결과, 블로그 사용요인과 업무만족도의 회귀분석 결과 블로그 사용요인 중 상호작용성과 정보추구성은 업무만족도에 영향을 줄 수 있지만, 오락추구성은 업무만족도에 그다지 영향을 미치지 않는 것으로 분석되었다. 둘째, 업무특성에 따라 블로그 사용 의도는 다를 수 있다는 가정 아래 업무특성 요인이 블로그 사용의도에 어떠한 영향을 주는지에 대한 결과는 응답자의 결과 값을 정형/비정형업무, 개인업무/집단업무, 재석업무/이석업무로 구분 지었으며, 회귀분석을 돌렸지만 이러한 업무특성요인에 따른 블로그 사용의도는 업무만족도에 별다른 영향을 주지 않는 것으로 드러났다. 이러한 결과를 바탕으로 학문적, 실무적 시사점을 제시하였다.

• 대한기계학회논문집A
• /
• 제28권12호
• /
• pp.1958-1967
• /
• 2004

This paper describes the method to rapidly fabricate the large-sized physical model with the envelope model size of more than 600 mm${\times}$ 600 mm${\times}$ 600 mm using two type semi-automatic VLM-ST processes in connection with the reverse engineering technology. The fabrication procedure of the large-sized solid shape is as follows: (1) Generation of STL data from 3D scan data using 3D scanner, (2) generation of shell-type STL data by Boolean operation, (3) division of shell-type STL data into several pieces by solid splitting, (4) generation of USL data for each piece with VLM-Slicer, (5) fabrication of each piece by cutting and stacking according to USL data using VLM-ST apparatus, (6) completion of a shell-type prototype by zigzag stacking and assembly for each piece, (7) completion of a 3D solid shape by foam backing, (8) surface finish of a completed 3D solid shape by coating and sanding. In order to examine the applicability of the proposed method, the miniature of the Mount Rushmore Memorial has been fabricated. The envelope model size of the miniature of the Mount Rushmore Memorial is 1,453 mm${\times}$ 760 mm${\times}$ 853 mm in size. From the result of the fabricated miniature of the Mount Rushmore Memorial, it has been shown that the method to fabricate the large object using two type semi-automatic VLM-ST processes in connection with the reverse engineering technology are very fast and efficient.

• Steel and Composite Structures
• /
• 제36권4호
• /
• pp.417-426
• /
• 2020

Drilling processes in fiber-reinforced polymer composites are essential for the assembly and fabrication of composite structural parts. The economic impact of rejecting the drilled part is significant considering the associated loss when it reaches the assembly stage. Therefore, this article tends to illustrate the effect of cutting conditions (feed and speed), and laminate thickness on thrust force, torque, and delamination in drilling woven E-glass fiber reinforced epoxy (GFRE) composites. Four feeds (0.025, 0.05, 0.1, and 0.2 mm/r) and three speeds (400, 800, and 1600 RPM) are exploited to drill square specimens of 36.6×36.6 mm, by using CNC machine model "Deckel Maho DMG DMC 1035 V, ecoline". The composite laminates with thicknesses of 2.6 mm, 5.3 mm, and 7.7 mm are constructed respectively from 8, 16, and 24 glass fiber layers with a fiber volume fraction of about 40%. The drilled specimen is scanned using a high-resolution flatbed color scanner, then, the image is analyzed using CorelDraw software to evaluate the delamination factor. Multi-variable regression analysis is performed to present the significant coefficients and contribution of each variable on the thrust force and delamination. Results illustrate that the drilling parameters and laminate thickness have significant effects on thrust force, torque, and delamination factor.

• 한국조경학회지
• /
• 제28권1호
• /
• pp.109-117
• /
• 2000

The purpose of this study is to examine the effect factors in suburban rural landscape and significant factors of apartment complex which are effective to the skyline of the sloped mountains. Also it is to propose the basic resources to preserve and improve the suburban rural landscape. The target site is Young-In, which shows the typical of rural development. Sides were take in young-In City along the roads and selected for 20 pieces. This study used questionnaire about the suburban rural landscape surveying of 45 students in Kyunghee Univ.. Also we found 2 dependent variables and 8 independent variables totally. Moreover, we have analyzed the data using descriptive statistics, correlation analysis, and multiple linear regression method between the preference and physical factors, and between the vulnerability and perceptional factors. The results are as follows: 1) With the dependent variable of preference, the areas of "green space" and "agricultural productive lands" were highly influenced in the suburban rural landscape positively, but the areas of "apartment complex" and "other buildings" were negatively effected. 2) With the dependent variable vulnerability, the area "apartment complex" and cutting numbers of the "skyline of mountainous ridge" were proved as significantly positive factors, but the length of the "skyline of mountainous ridge" turned out to be a negative factor. Although this study has the difficulty to be generalized, it can be used for planning and designing of the apartment complex in suburban rural landscapes, and it will provide the basic guideline for preserving and managing of the suburban rural landscapes.uideline for preserving and managing of the suburban rural landscapes.

• 대한두경부종양학회지
• /
• 제34권1호
• /
• pp.15-19
• /
• 2018

Background and Objectives: Thunderbeat (TB) and Harmonic scalpel (HS) have been applied to variable head and neck surgery, which are useful for both coagulation and cutting of tissues. However, there have been no comparative studies covering the usefulness of these energy devices in surgery for major salivary gland. In this study, we analyzed the surgical outcomes of two devices in surgery for parotidectomy and submandibular gland (SMG) resection. Materials and Methods: A retrospective chart review of 90 patients including two groups (HS group, n=45 versus TB group, n=45) of patients matched for their patient factors was conducted. Clinicopathologic factors of the patients and surgical outcomes such as the operation time, intraoperative bleeding, amount and duration of drain, hospital stay and complications were compared between two groups. Results: There were no significant difference between two groups regarding the clinicopathologic factors and short-term surgical outcomes. Conclusion: Thunderbeat and HS are both effective and safe for parotidectomy and SMG resection in variable benign disease of major salivary gland.

• 한국광학회지
• /
• 제32권4호
• /
• pp.153-162
• /
• 2021

본 논문에서는 적외선 탐색 및 추적 기능을 수행하는 광각 주사 광학계와 표적의 전자광학 추적 기능을 수행하는 협/중시계 광학계의 기능이 통합된 가변 F/수 삼중 배율 적외선 광학계를 설계하였다. 기존 광각 주사 광학계를 기반으로 무한 초점 광학계를 전단부에 설계하여 협/중시계 기능을 수행할 수 있는 광학계를 구현하였다. 시스템 성능 분석을 통해 성능 목표를 설정하고, 이를 바탕으로 광학계 설계를 위한 설계 사양을 도출하였으며, F/수가 다른 광학계를 추가하기 위해 조리개 크기를 줄여주는 웜 스톱을 적용하였고, 설계된 광학계에 적합하도록 세부 형상을 설계하였다. 설계 완료된 협/중시계 광학계 설계 결과를 분석하여 MTF (modulation transfer function)와 같은 목표 성능을 만족하는 것을 확인하였으며 운용성을 고려하여 비열화와 표적 거리에 따른 초점 렌즈군의 이동량을 분석하였고, 이를 통해 광역 탐색 및 추적 기능과 정밀 추적 및 3차원 정보 획득 기능이 통합된 단일 광학 시스템의 구현이 가능함을 확인하였다.

• 로봇학회논문지
• /
• 제17권2호
• /
• pp.142-151
• /
• 2022

With the advent of the 4th industrial revolution, autonomous driving technology is being commercialized in various industries. However, research on autonomous driving so far has focused on platforms with wheel-type platform. Research on a tracked platform is at a relatively inadequate step. Since the tracked platform has a different driving and steering method from the wheel-type platform, the existing research cannot be applied as it is. Therefore, a path-tracking algorithm suitable for a tracked platform is required. In this paper, we studied a path-tracking algorithm for a tracked platform based on a GPS sensor. The existing Pure Pursuit algorithm was applied in consideration of the characteristics of the tracked platform. And to compensate for "Cutting Corner", which is a disadvantage of the existing Pure Pursuit algorithm, an algorithm that changes the LAD according to the curvature of the path was developed. In the existing pure pursuit algorithm that used a tracked platform to drive a path including a right-angle turn, the RMS path error in the straight section was 0.1034 m and the RMS error in the turning section was measured to be 0.2787 m. On the other hand, in the variable LAD algorithm, the RMS path error in the straight section was 0.0987 m, and the RMS path error in the turning section was measured to be 0.1396 m. In the turning section, the RMS path error was reduced by 48.8971%. The validity of the algorithm was verified by measuring the path error by tracking the path using a tracked robot platform.