• Journal of the Society of Disaster Information
• /
• 제13권3호
• /
• pp.366-375
• /
• 2017

Internal factors having effects on compressive strength test results of concrete include size, shape, height-diameter ratio(h/d), section processing method, dryness and wetness, etc. of the specimen. As it is difficult to ensure dimensions of core specimen due to rebar cutting from rebar spacing, wall thickness, effects on the structure, etc. when taking core of the concrete structure, correction of dimensions and h/d of the specimen become important for quality control of the concrete. Thus, in order to review effects of specimen size and height-diameter ratio for the concretes with compressive strength within 40~60MPa, this study has experimentally reviewed compressive strength test values by applying correction factors pursuant to KS F 2422 (Method of obtaining and testing drilled cores and sawed beams of concrete), when changing specimen diameter to ${\emptyset}5{\sim}15cm$, and h/d to 2.0~1.25.

• Restorative Dentistry and Endodontics
• /
• 제25권2호
• /
• pp.243-253
• /
• 2000

The purpose of this in vitro study was to evaluate dentin bonding by two different dentin bonding systems(DBS) using acetone based primer or adhesive [All Bond 2(AB2), One Step(OS)] when they were applied by wet or dry bonding technique. Morphology of resin-dentin interface and hybrid layer thickness(HLT) were investigated using Confocal Laser Scanning Microscope(CLSM) and compared to shear bond strength(SBS). 72 extracted sound human molars were randomly divided into 4 groups of 18 teeth each - Group 1.(AW); AB2 by wet bonding. Group 2(AD); AB2 by dry bonding. Group 3.(OW); OS by wet bonding, Group 4.(OD); OS by dry bonding. In 6 teeth of each group, notch-shaped class V cavities(depth 2mm) were prepared on buccal and lingual surface at the cementoenamel juction(12 cavities per group). To obtain color contrast in CLSM observation, bonding resins of each DBS were mixed with rhodamine B and primer of AB2 was mixed with sodium fluorescein. Prepared teeth of each group were treated with AB2, OS, respectively according to the manufacturer's instructions except for dentin surface moisture treatment after acid etching. In group 1 and 3, after acid etching, excess water was removed with wet tissue(Kimwipes), leaving consistently shiny, visibly hydrated dentin surface. In group 2 and 4, dentin surface was dried for 10 seconds at 1 inch distance. The treated teeth were then packed with composite resin(${\AE}$litefil) and light-cured. 12 microscopic samples($60{\sim}80{\mu}m$ thickness) of each group were obtained after longitudinal section and grinding(Exakt cutting and grinding system). Morphological investigation of resin-dentin interface and HLT measurement using CLSM were done. For measurement of SBS, remaining 12 teeth of each group were flattened occlusally to remove all enamel and grinded to 500 grit SiC(Pedemet Specimen Preparation Equipment). After applying DBS on the exposed dentin surface, composite resin was applied in the shape of cylinder, which has 5mm diameter, 1.5mm thickness, and light cured. SBS was measured using Instron with a crosshead speed of 0.5mm/min. It was concluded as follows, 1. HLT of AW(mean: $2.59{\mu}m$) was thicker than any other group, and followed by AD, OW, OD in descending order(mean; 2.37, 2.28, $1.92{\mu}m$). Only OD had statistically significant differences(p<0.05) to AW and AD. 2. There were intimate contact of resin and dentin at the interface in wet bonding groups, but gaps or irregular interfaces were observed in dry bonding groups. 3. The length, diameter, density of resin tags were various even in the same group without significant differences between groups and lots of adhesive lateral branches were observed. 4. There were no statistically significant difference of SBS between AB2 and OS, but SBS of wet bonding groups were significantly higher(p<0.05) than dry bonding groups. 5. There were no consistent relationships between HLT and SBS.

• Korean Journal of Breeding Science
• /
• 제41권4호
• /
• pp.616-619
• /
• 2009

A new standard rose cultivar "Red Charm" was bred from the cross between deep red standard cultivar "First Red" and light red standard cultivar "Cardinal" at the Jeollanamdo Agricultural Research and Extention Services (JARES). The cross was made in 2003 and, "Red Charm" was finally selected in 2008 after investigating characteristics for three times from 2007 to 2008. "Red Charm", a red standard cultivar has good flower shape and velvet flower color. The major characteristics of this cultivar are on average $119.3stems/m^2/year$ in yield, 69.5 cm in length of cut flower, 10.3 cm in flower diameter, 36.9 in petal number, and 9.8 days in vase life. This cultivar can be propagated by both cutting and grafting. The consumer's preference of this cultivar, "Red Charm" is relatively higher than that of control cultivar, "Red Velvet".

• FLOWER RESEARCH JOURNAL
• /
• 제19권4호
• /
• pp.251-254
• /
• 2011

A new standard white-pink flower rose cultivar 'Innocence' was bred from the cross between white standard cultivar 'Juvena' and green-white standard cultivar 'Green Success' at the Jeollanamdo Agricultural Research and Extension Services (JARES). The cross was made in 2001 and, 'Innocence' was finally selected in 2006 after investigating characteristics for three times from 2004 to 2006. 'Innocence' a white-pink standard cultivar has good flower shape with few prickles. The major characteristics of this cultivar were $118.7stems{\cdot}m^{-2}$ in year yield, 68.0 cm in length of cut flower, 10.9 cm in flower diameter, 34.4 in petal number, and 10.7 days in vase life. This cultivar can be propagated by both cutting and grafting. The consumer's preference of this cultivar was relatively higher than that of control cultivar, 'Rose Yumi'.

• Korean Journal of Breeding Science
• /
• 제41권3호
• /
• pp.284-287
• /
• 2009

A new spray rose cultivar "Morning Star" was bred from the cross between orange spray cultivar 'Macarena' and yellow spray cultivar 'Lion Sunshine' at the National Institute of Horticultural Research Institute. The cross was made in 2002 and "Morning Star" was finally selected in 2007 after investigating characteristics for three years from 2005 to 2007. "Morning Star", a orange spray cultivar grows vigorously and has good flower shape. The major characteristics of this cultivar are 170.2 stems/$m^2$/year in yield, 57.4cm in length of cut flower, 5.5cm in flower diameter, 48.5 in petal number, and 11.4 days in vase life. This cultivar can be propagated by both cutting and grafting. The consumer's preference of this cultivar is relatively higher than that of control cultivar, 'Sunny Lady'.

• Korean Journal of Breeding Science
• /
• 제42권3호
• /
• pp.276-279
• /
• 2010

A new standard rose cultivar 'Snow Ball' was bred by the cross between the red standard cultivar 'Red Sandra' and the scarlet standard cultivar 'Baroness' at the National Institute of Horticultural and Herbal Science, in Suwon. The cross was made in 1998 and 'Snow Ball' was finally selected in 2003 after investigating the characteristics for three years from 2001 to 2003. 'Snow Ball', a white standard cultivar grows vigorously and has good flower shape. The major characteristics of this cultivar are $90.3stems/m^2/year$ in yield, 57.8 cm in length of cut flower, 6.1 cm in flower diameter, 85.7 in petal number, and 15.0 days in vase life. This cultivar can be propagated by both cutting and grafting. The consumer's preference of this cultivar is relatively higher than that of control cultivar, 'Tineke'.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제20권2호
• /
• pp.67-75
• /
• 2019

The diaphragm used for CFT columns has a small amount of steel to be used, but has a disadvantage that welding is difficult and openings are required because the steel tube and four sides must be welded. The improved diaphragm to be examined in this study was cut into four corners by cutting the center hole for concrete filling. In the improved diaphragm, the width of the center hole is the same as that of the previous diaphragm, but the width of the diaphragm contacting the steel tube is reduced, thereby reducing the welding length by about 70% compared to the previous diaphragm. The in-plane strain of each specimen was analyzed when the same load was applied to the interior diaphragm through a simple tensile test. Using the general FEM program(ANSYS 19.2), the analysis was performed under the same conditions as the actual simple tensile test, and the load transfer between the improved diaphragm and the previous diaphragm was compared. When the width of the diaphragm is equal to or smaller than the flange width, stress is concentrated from the end of the diaphragm, and when the flange width is larger, stress is concentrated at the center.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• 제52권5호
• /
• pp.445-451
• /
• 2019

In the industrial production of fish snacks using frozen surimi, molding the surimi mixture requires an expensive automated machine. This study investigated the efficacy of freeze molding without machinery molding in the production of Alaska pollock Theragra chalcogramma surimi snacks. At 90 minutes after deep freezing at $-80^{\circ}C$, the cutting ease and shape retention of the surimi mixture were superior. The freezing-molded surimi snack had a higher TVB-N (total volatile basic nitrogen) level (3.59 mg/100 g) than that (1.50 mg/100 g) of the normally molded surimi snack. Freezing did not affect the microstructure of the surimi snack or its hardness, which is an important physical property of snack products. The freezing-molded and normally molded snacks did not differ significantly in terms of color or appearance, or in any other aspect of the sensory evaluation. Our findings demonstrate that freeze molding does not induce changes in the quality of surimi snacks. Therefore, molding by freezing treatment could be used to produce surimi snacks at small- and mid-sized seafood companies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제22권2호
• /
• pp.593-601
• /
• 2021

The axial fan is an element of a blower used for ventilation in various industrial fields. Many studies on aerodynamic performance have been conducted to assess axial fans using fluid dynamics. The subject was a large axial fan size, 1800 mm in diameter with 100 horsepower. The blower's axial fan consisted of blades, hubs, hub caps, and bosses are important components. The blade design has a great influence on the aerodynamic performance. 3D point data is extracted using an aerodynamic performance prediction program, and a 3D modeling shape is generated. The blades and hubs, which are important components, can be easily modified if processed by cutting owing to the environment in which blades and hubs are manufactured through die casting or gravity casting. In this study, the structural safety of components and the analysis results of weak areas at the rated operating speed of the axial fan were verified using the maximum stress and safety factor. The tip clearance reflected in the design was the rotation of the blade. To check whether there is interference with other components, the displacement result was derived to verify the structural safety of the axial fan.

• Korean Journal of Radiology
• /
• 제23권1호
• /
• pp.42-51
• /
• 2022

Objective: This study aimed to investigate the direction of tissue contraction after microwave ablation in ex vivo bovine liver models. Materials and Methods: Ablation procedures were conducted in a total of 90 sites in ex vivo bovine liver models, including the surface (n = 60) and parenchyma (n = 30), to examine the direction of contraction of the tissue in the peripheral and central regions from the microwave antenna. Three commercially available 2.45-GHz microwave systems (Emprint, Neuwave, and Surblate) were used. For surface ablation, the lengths of two overlapped square markers were measured after 2.5- and 5-minutes ablations (n = 10 ablations for each system for each ablation time). For parenchyma ablation, seven predetermined distances between the markers were measured on the cutting plane after 5- and 10-minutes ablations (n = 5 ablations for each system for each ablation time). The contraction in the radial and longitudinal directions and the sphericity index (SI) of the ablation zones were compared between the three systems using analysis of variance. Results: In the surface ablation experiment, the mean longitudinal contraction ratio and SI from a 5-minutes ablation using the Emprint, Neuwave, and Surblate systems were 28.92% and 1.04, 20.10% and 0.53, and 24.90% and 0.45, respectively (p < 0.001). A positive correlation between longitudinal contraction and SI was noted, and a similar radial contraction was observed. In the parenchyma ablation experiment, the mean longitudinal contraction ratio and SI from a 10-minutes ablation using the three pieces of equipment were 38.60% and 1.06, 32.45% and 0.61, and 28.50% and 0.50, respectively (p < 0.001). There was a significant difference in the longitudinal contraction properties, whereas there was no significant difference in the radial contraction properties. Conclusion: The degree of longitudinal contraction showed significant differences depending on the microwave ablation equipment, which may affect the SI of the ablation zone.