• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.4
• /
• pp.382-385
• /
• 2011

There is an immense need to obtain nanometric surface finish on optical glass owing to the advantage of improved performance of the components. But owing to brittleness and hardness, optical glass is one of the materials that is difficult to ultra-precision turning. According to the hypothesis of ductile mode machining, regardless of their hardness and brittleness, will undergo a transition from brittle to ductile machining region below a critical undeformed chip thickness. Below this threshold, it is suggested that the energy required for plastic formation. Thus, plastic deformation is the predominant mechanism of material removal in machining these materials in this mode. An experimental study is conducted diamond cutting for machining BK7 glass. The investigation presents the feasibility of achieving nanometric surface and the understanding the mechanism of cutting glass, proving the cutting edge radius effect.

• Korean Journal of Environment and Ecology
• /
• v.12 no.3
• /
• pp.279-289
• /
• 1998

To monitor vegetation structure of evergreen broad-leaved forest, twenty plots were set up at Wando Arboretum in 1996. Twenty plots were divided into ten experimental plots and control plots. A few evergreen broad-leaved species were planted after selective cutting at ten experimental plots. Dominant species of twenty plots were Quercus acuta, Q. acuta and Carpinus tschonoskii, Pinus densiflora, etc.. Vegetation structure of the experimental plots showed seral stage of succession from P. densiflora community or deciduous broad-leaved forest to Q. acuta community. Dominant species of the experimental plots were changed to Q. acuta or P. densiflora after selective cutting. And a number of species and individuals, coverages etc. were increased at shrub and ground cover layer after treatment.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.5 no.1
• /
• pp.19-27
• /
• 2002

To investigate the dominant species and factors related with plant coverage by road structures and forest environment factors, forest roads elapsed from one year to twelve year after construction had been selected in six county(Gochang-gun, Muju-gun, Imsil-gun, Jangsu-gun, Jeongup-shi and Jinan-gun), and 20m segments were continuously set up in each road. The results obtained from this study are summarized as follows: The species diversity of Gochang, Muju, Imsil, Jangsu, Jeongup and Jinan were 1.304, 1.267, 1.308, 1.193, 1.289 and 1.018, respectively. In process of years, plant coverage was increased gradually and average of plant coverage was 15.3% in forest roads which elapsed three year, and was 86.5% in forest roads which elapsed nine year after construction. The dominant species in the cutting slope of surveyed area were covered with Arundinella hirta, Pinus rigida, Miscanthus sinensis var. purpurascens, Artemisia princeps var. orientalis, Pinus densiflora, Oplismenus undulatifolius, Rubus coreanus, Lysimachia clethroides, Lespedeza bicolor, and Alnus hirsuta of the 152 species. The high correlated factors between plant coverage and variables in cutting slopes appeared elapsed year, soil hardness, mean annual precipitation, vertical grade, inslope and arid humidity in surveyed area.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.7 no.2
• /
• pp.204-211
• /
• 1983

To investigate the effects of oscillatory feed cutting on the chip breaking and surface roughness and circularity, A prototype unit developed for the experiment is used. The results obtained are as follows. (1) It is obtained the region of chip breaking as Ftmin $f_{+min}$0.03mm ( = 0.3f). (2) The surface roughness becomes worse with increasing the value of A/f, but the type of variation with respect to n/N differs from the case of A/f>1, f<1. (3) The circularity of workpiece is increasing from the fundamental mode of n/N=i to the maximum value of n/N=i+0.5, and becomes worse with increasing the value of A/f. (4) From the viewpoint of above details and tool mechanics, the condition of A/f=1.0 and n/N=i.+-. .delta. (0.3<.delta.<0.4) is recommended.

• Journal of Welding and Joining
• /
• v.18 no.3
• /
• pp.122-130
• /
• 2000

Due to the inherent dimensional uncertainty, the tolerances accumulate in the assembly of plasma cutting torch. Tolerance accumulation has serious effect on the performance of the plasma torch. This study proposes a statistical tolerance propagation model, which is based on matrix transform. This model can predict the final tolerance distributions of the completed plasma torch assembly with the prescribed statistical tolerance distribution of each part to be assembled. Verification of the proposed model was performed by making use of Monte Carlo simulation. Monte Carlo simulation generates a large number of discrete plasma torch assembly instances and randomly selects a point within the tolerance region with the prescribed statistical distribution. Monte Carlo simulation results show good agreement with that of the proposed model. This results are promising in that we can predict the final tolerance distributions in advance before assembly process of plasma torch thus provide great benefit at the assembly design stage of plasma torch.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.363-366
• /
• 2001

Many joint parts by welding are found in the compression vessels, ship structures, pipings, heat exchangers, etc. Before their welding, steel plate cutting in a required form is very important. But because of the present CAD system's capability, unless otherwise expensive general CAD system is equipped, the efficiency or the accuracy of the cutting work can not be achieved easily. In order to get over this sort of problems, application-specific software that is limited on for the development view of the joint parts in those sort of facilities mentioned before was developed in this study.

• Transactions of Materials Processing
• /
• v.17 no.2
• /
• pp.107-112
• /
• 2008

In order to investigate the residual stress evolution during the leveling process of hot rolled high strength coils for cold forming, the in-plane residual stress of plate sampled at SPM, rough leveler and finish leveler were measured by cutting method. Residual stress was localized near the edge of plate. As the thickness of plate was increased, the size of residual stress region was expanded. The gradient of residual stress within the plate was reduced during the leveling process. But the residual stress itself was not removed completely within the ranges of tested conditions. The exact camber of cut plate was able to be predicted by the measurement of residual stress distribution after leveling of the plate.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.112-115
• /
• 2007

In order to investigate the residual stress evolution during the leveling process of hot rolled high strength coils for cold forming, the in-plane residual stress of plate sampled at SPM, rough leveler and finish leveler were measured by cutting method. Residual stress was localized near the edge of plate. As the thickness of plate was increased, the region with residual stress was expanded. The gradient of residual stress within plate was reduced during the leveling process. But the residual stress itself was not removed at the ranges of tested conditions. From the measured residual stress distribution within the plate, camber of plate cut to small width was predicted exactly within error range of experiment.

• Plant Resources
• /
• v.7 no.3
• /
• pp.211-215
• /
• 2004

The effects of topping method on the yield and major agronomic traits of two varieties, Sunwol and Youngjun of Alisma plantago, were investigated in the Southern region. Plant height, yield of fresh root, yield of dry root and weights of total roots were the highest in the variety of Sunwol, and at the plots with topping of four times cutting in flowering in main culm (Treatment No.1). Considering from our results, optimum topping method is most likly be topping of four times cutting in flowering in main culm in the Sunwol variety.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.3
• /
• pp.83-90
• /
• 2004

This paper proposes a tool path generation method for machining impellers with 5-axis machining center. The shape of impeller is complex, being composed of pressure surface, suction surface and leading edge, and so on. The compound surface which is made of ruled surface such as pressure surface and suction surface and leading edge such as fillet surface, makes the tool path generation much complicated. To achieve efficient roughing, cutting area is divided into two region and then tool radius of maximum size that do not cause tool intereference is selected for shortening machining time. In finishing, accuracy is improved using side cutting for blade surface and point milling for leading edge.