• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.3
• /
• pp.344-350
• /
• 2011

Kura clover (Trifolium ambiguum M. Bieb.) is a potentially useful perennial legume because of its excellent nutritive value and persistence under environmental extremes. However, information about forage quality of kura clover - grass mixtures adapted to the North-Central USA is limited. Objectives of this research were to determine forage nutritional value of kura clover-grass mixtures under different harvest frequency and cutting height regimes. 'Rhizo' kura clover was grown alone and in binary mixtures with 'Park' Kentucky bluegrass (Poa pratensis L.), 'Comet' orchardgrass (Dactylis glomerata L.), and 'Badger' smooth bromegrass (Bromus inermis Leyss.) at the Arlington Agricultural Research Station located near Madison, WI. Three harvest frequencies ($3{\times}$, $4{\times}$, or $5{\times}$ annually) and two cutting heights (4- or 10-cm) were imposed on each binary mixture and on kura clover grown alone. Higher nutritive value was observed in the binary mixtures with more frequent harvest and lower cutting height. Averaged over 3 years and all harvest frequency and cutting height treatments, the nutritive value of the Kentucky bluegrass and smooth bromegrass mixtures was superior to that of the orchardgrass mixture ($410\;g\;kg^{-1}$ NDF and $194\;g\;kg^{-1}$ CP in the Kentucky bluegrass mixture; $405\;g\;kg^{-1}$ NDF and $188\;g\;kg^{-1}$ CP in the smooth bromegrass mixture; $435\;g\;kg^{-1}$ NDF and $175\;g\;kg^{-1}$ CP in the orchardgrass mixture). All of the mixtures and harvest management systems evaluated in this study produced forage with quality equivalent to "grade one" alfalfa hay and suitable for highproducing livestock, even though the highest quality was observed in the Kentucky bluegrass mixture with $5{\times}$ harvesting at the shorter cutting height.

• Journal of Biosystems Engineering
• /
• v.40 no.4
• /
• pp.314-319
• /
• 2015

Purpose: The ratio of straw to grain mass as a function of cutting height affects combine efficiency and power consumption and is an important input parameter to combine simulation models. An equation was developed to predict straw to grain ratios for wheat as a function of cutting height. Methods: Two mass functions, one for straw and one for grain, were developed using regression techniques and measured data collected in west Texas during the summer, and used to predict the straw to grain ratio. Results: Three equations were developed to facilitate the simulation of a combine during wheat harvest. Two mass functions, one for straw and one for grain, were also developed; a quadratic equation describes the straw mass with an $R^2$ of 0.992. An S-shaped curve describes the mass function for grain with an $R^2$ of 0.957. An equation for straw to grain ratio of wheat was developed as a function of cutting height. The straw to grain ratio has an $R^2$ value of 0.947. Conclusions: In all cases, the equations had $R^2$ values above 0.94 and were significant at the 99.9 percent probability level (alpha = 0.001). Although all three equations are useful, the grain mass and straw to grain ratio equations will have direct application in combine simulation models.

• Journal of Power System Engineering
• /
• v.11 no.3
• /
• pp.47-52
• /
• 2007

Punching, blanking, trimming and slitting are widely used in shearing processes in sheet metal forming of automotive parts. In this paper the effects of clearance, cutting angle and tool sharpness on the formation of burr were investigated by experimental method in shearing processes of steel sheets, SPCEN and SPRC35E. The amount of burr and the shapes of burr were different between two kinds of steel sheets. It has been shown that the cutting angle of the shearing blade had no effects on the height of burr when the clearance was below the 10% of the steel sheet thickness, and also that the height and shape of burr were not affected by the cutting angle when the wear of shearing blade was below the 10% of the steel sheet thickness. It was known that there had been existing the critical clearance of 10 to 15% for the tested steel sheet, SPCEN and SPRC35E.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.47-52
• /
• 1999

Theoretical and experimental studies on burr formation and deburring in many manufacturing processes have been actively pursued. Though micro-drilling has become more important in the production of precision parts such as PCB, air bearing, camera and nozzle, most studies on drilling burr formation have focused on the conventional drilling process. This paper describes burr formation process and the effect of cutting conditions such as spindle speed, feedrate and drilling depth per one step on burr formation in drilling A6061 with drills of diameter 1.0mm and 0.6mm. Experimental results showed that burr with cap were formed at relatively low feedrates, while petal burrs with several large burr fragments were formed at high feedrates. Burr height appeared to increase at the hight feedrates and lower spindle speeds. The effect of final cutting depth on burr height was negligible.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.2
• /
• pp.145-154
• /
• 2004

The objective of this experiment was to suggest the optimum cutting height for turf type mixtures{Kentucky bluegrass(Newport) 40％ + tall fescue(Rebell Jr) 20％ + perennial ryegrass (Palmer Ⅱ) 10% + redtop(Barricuda) 10％ + red fescue(Salem) 10% + creeping bentgrass(Crenshaw) IO%}. The fields trials were conducted from 1998 to 2001 at Chungnam National University in order to evaluate the dry matter yield and quality on the cutting heights(3, 4, and 5cm). With increasing the cutting height, the average DM yields of turf type mixtures over 3-year significantly increased, therefore the average total DM yields were obtained 11,158, 12,143 and 13,181㎏/ha at cutting height 3, 4 and 5cm(p<0.05), respectively. The CP content and OMO decreased(p<0.05), whereas the fiber contents slightly increased with increasing the cutting height. The average CPDM and DDM yields were obtained 2,012 and 8,621㎏, 2,097 and 9,461㎏, and 2,298 and 9,951㎏ at cutting height 3, 4, and 5㎝(p<0.05), respectively. The botanical compositions of Kentucky bluegrass and tall fescue were maintained high as 30 ∼ 36％, but that of perennial ryegrass was maintained low as 10-15%. Most of other species were low, but redtop and creeping bentgrass among the other species made up 8∼10％ and 7 ∼ 8% of botanical composition at the last 6th cutting time in 2001, respectively. In general, the level of cutting height of turf type mixtures was not more closely associated with botanical composition. The results of this experiment indicated that a 5㎝ of cutting height of turf type mixtures sown by extensive method would seemed adequate.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.1
• /
• pp.144-149
• /
• 2008

This study presents the selection of cutting conditions in high speed pipe cutting machine for the better quality. A high speed pipe cutting machine which uses a rotary knife can make good quality products in short time. But, the machine is much sensitive by cutting conditions because of the complicated mechanism. In this reason, many experiments for cutting condition selection are necessary to improve quality of production. This study carried out cutting experiments with the three factors that are cutting RPM, cutting force and pooling force. 2-dimensional profile measuring instrument is used to measure which is represented by ${\Delta}h$, a sum of burr and collapse height. The effects of factors are analyzed by using MINITAB, the commercial software.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.16 no.3
• /
• pp.97-105
• /
• 2013

Kalopanax septemlobus (Thunb. ex Murray) Koidz. is natively distributed in Korea. The importance of this species has been increased not only for high quality timber but for medicinal and edible uses. However, increasing market demand of K. septemlobus with illegal cutting and overexploitation has resulted in its rapid depletion and destruction of natural habitat. This study was conducted to understand the survival rate and growth characteristics of planted K. septemlobus seedlings with treatment of root pruning, stem cutting and planting density. The survival rate and growth of height and root-collar diameter for one- and two-year old seedlings with different planting densities were investigated in the clear-cut area of a Pinus densiflora stand for five years. One-year-old seedlings were treated with or without root pruning and planted with three density levels (5,000 trees $ha^{-1}$, 10,000 trees $ha^{-1}$, and 40,000 trees $ha^{-1}$). Two-year-old seedlings were treated with and without stem cutting and planted with the density of 5,000 trees $ha^{-1}$. The survival rate of one-year-old seedlings with root pruning treatment in the density of 10,000 trees $ha^{-1}$ was 92%, while that without root pruning in the density of 40,000 trees $ha^{-1}$ was 67% after five years. The height of one-year-old seedlings has been significantly affected only by planting density in the $5^{th}$ year. The survival rate of the two-year-old seedlings with stem cutting was 75.5% and greater than control (67.3%) in the $5^{th}$ year but no difference in height was shown between the two treatments from three years after plantation.

• Journal of Environmental Science International
• /
• v.23 no.6
• /
• pp.1075-1083
• /
• 2014

The objective of this study was to evaluate the effect of cutting types on microclimate and growth characteristics of afforested tree in Quercus acutissima stand after different types of cutting. The difference in temperature reaching $5.2^{\circ}C$ was shown in between clear cutting and selective cutting treatments. On July and August days with temperatures more than $35^{\circ}C$ often appeared in clear cutting stand. The values of VPD in July and August were higher than those in other months. Maximum VPD of 3.99 kPa was shown in clear cutting stand on May 23 as a prolonged rainless days appeared. However, VPD in selective cutting stand always stayed under 3.0 kPa throughout growing season. A higher intensity was shown in clear cutting and strip clear cutting stands, reaching to more than $1,600{\mu}mol\;m^{-2}s^{-1}$ at midday on early August, while that in selective cutting stand stayed about 1,500. In relative growth rate selective cutting stand showed a significantly higher relative growth rate in plant height than those in other cutting stands (p<0.05). The number of leaf in current-year branches significantly increased in selective cutting stand, whereas no increase was shown in clear cutting and strip clear cutting stands (p<0.05). In addition, relative elongation rate of current year branch also showed higher values in selective cutting stand compared with that in strip clear cutting stand (p<0.05). However, leaf mass per unit area (LMA) was higher in order of strip clear cutting, clear cutting, and selective cutting stands. From these results it is concluded that environmental conditions in clear cutting and strip clear cutting stands during growing season are more stressful to afforested tree species, resulting in lower relative growth in plant height, elongation of current-year branches, and leaf number per branch compared with those in selective cutting stand. Consequently, more data must be accumulated in the field to find out best cutting type in plantation considering the adaptational characteristic of each tree species varies with species and life span of tree is long.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.3 no.2
• /
• pp.58-66
• /
• 1983

This experiment was carried out to investigate the effects of the nitrogen rates and cutting heights on the appearance dry weight and death of new bud (branch and tiller) of sorghum-sudangrass hybrid (Sorghum bicolor (L.) Moench). The cultivar used in the present study was Pioneer 988. The experiment was arranged as a split plot design and undertaken in the Experimental Livestock Farm of Agriculture Coll., Seoul Nat'l Univ. in Suweon, 1981 and 1982. The results obtained are summarized as follows: 1. The appearance and death of branch and tiller were not influenced with high nitrogen fertilization. 2. The frequency of the branching was decreased as the low stubble height, and the rate of the tillering was decreased in the high stubble height. 3. The yield of forage mostly depended on the tiller regardless of cutting height, and minor portion of the yield was resulted from the branch. 4. The low cutting height resulted in the increased number of dead bud (p<0.05).

• Geomechanics and Engineering
• /
• v.21 no.1
• /
• pp.23-33
• /
• 2020

An advancing cutting roof for gob-side entry retaining with no-pillar mining under specific geological conditions is more conducive to the safe and efficient production in a coalmine. This method is being promoted for use in a large number of coalmines because it has many advantages compared to the retaining method with an artificial filling wall as the gateway side filling body. In order to observe the inner structure of the gateway cutting roof and understand its stability mechanism, an equivalent material simulation experiment for a coalmine with complex geological conditions was carried out in this study. The results show that a "self-stabilization bearing structure" equilibrium model was found after the cutting roof caving when the cut line deviation angle was unequal to zero and the cut height was greater than the mining height, and the caving roof rock was hard without damage. The model showed that its stability was mainly controlled by two key blocks. Furthermore, in order to determine the optimal parameters of the cut height and the cut line deviation angle for the cutting roof of the retaining gateway, an in-depth analysis with theoretical mechanics and mine rock mechanics of the model was performed, and the relationship between the roof balance control force and the cut height and cut line deviation angle was solved. It was found that the selection of the values of the cut height and the cut line deviation angle had to conform to a certain principle that it should not only utilize the support force provided by the coal wall and the contact surface of the two key blocks but also prevent the failure of the coal wall and the contact surface.