• Earthquakes and Structures
• /
• v.17 no.2
• /
• pp.175-189
• /
• 2019

The aim of the study is to show the results of complex shaking table experimental investigation focused on the response of two models of cylindrical steel tanks under mining tremors and moderate earthquakes, including the aspects of diagnosis of structural damage. Firstly, the impact and the sweep-sine tests have been carried out, so as to determine the dynamic properties of models filled with different levels of liquid. Then, the models have been subjected to seismic and paraseismic excitations. Finally, one fully filled structure has been tested after introducing two different types of damages, so as to verify the method of damage diagnosis. The results of the impact and the sweep-sine tests show that filling the models with liquid leads to substantial reduction in natural frequencies, due to gradually increasing overall mass. Moreover, the results of sweep-sine tests clearly indicate that the increase in the liquid level results in significant increase in the damping structural ratio, which is the effect of damping properties of liquid due to its sloshing. The results of seismic and paraseismic tests indicate that filling the tank with liquid leads initially to considerable reduction in values of acceleration (damping effect of liquid sloshing); however, beyond a certain level of water filling, this regularity is inverted and acceleration values increase (effect of increasing total mass of the structure). Moreover, comparison of the responses under mining tremors and moderate earthquakes indicate that the power amplification factor of the mining tremors may be larger than the seismic power amplification factor. Finally, the results of damage diagnosis of fully filled steel tank model indicate that the forms of the Fourier spectra, together with the frequency and power spectral density values, can be directly related to the specific type of structural damage. They show a decrease in the natural frequencies for the model with unscrewed support bolts (global type of damage), while cutting the welds (local type of damage) has resulted in significant increase in values of the power spectral density for higher vibration modes.

• Journal of Korean Society for Atmospheric Environment
• /
• v.4 no.1
• /
• pp.33-44
• /
• 1988

For the purpose of examining the effects of simulated acid rain on the chemical properties of the experimental soil in Pinus densiflora seedlings and Forsythia koreana rooted cuttings, the experimental design of randomized block arrangement with three replications was implemented in the experimental field of Yesan National Agricultural Junior College. One-year-old Pinus densiflora seedlings and Forsythia koreana cuttings were planted in the pots filled the mixed soils (nursery soil: forest soil of siliceous sandy loam = 1 : V/V)in the early spring of 1985. The regime of artificil acid rain, in terms of spray frequency per monthly and spray amount at single treatment per plot, was simulated on the basis of climatological data averaged from 30 years records. Simulated acid rain (pH 2.0, pH4.0, and pH 5.5 as control) containing sulfuric and nitric acid in the ratio of 3:2 (chemical equivalant basis) diluted ground water, were treated on the experimental plants under condition of cutting off the natural precipitation with vinyl tunnel, during the growing season (May 1 to August 31) in 1985. THe results obtained in this study were as follows; 1. Soil acidity was dropped, and exchangeable aluminum contents in the soil was dramatically increased in both species, with decreasing pH levels of acid rain. 2. Exchangeable potassium, clacium, magnesium contents, and base saturation degree of the soil were highly drcreased in two species as the pH levels of acid rain decreased. 3. In two species, sulfate concentrations in the soil were decreased of pH 4.0 treatment, and remarkably increased at pH 2.0 treatment of acid rain in comparison with control. 4. Total nitrogen and available phosphate contents of the soil were not affected by acid rain treatment in the both species, and Fe contents at pH 2.0 treatment were highest among three acid rain treatments.

• Journal of dental hygiene science
• /
• v.23 no.1
• /
• pp.1-12
• /
• 2023

Background: This study aimed to identify the present level and needs of clinical dental hygienists and to present the Borich needs assessment and the locus for focus model as integrated priorities. Methods: The participants of this study were dental hygienists working in dental clinics (hospitals). The final data of the 194 participants were analyzed using frequency analysis and a paired sample t-test. To analyze the need for clinical dental hygienists to perform work, the Borich priority determination formula was used. The x-y plane consisting of four quadrants was used to analyze the need using the locus for focus model, which helps to determine the priority while showing visual effects. Results: "Scaling" was the highest required level for clinical dental hygienists, and "panorama taking" was the highest present level. The priorities of educational needs were systematically and visually derived from dental hygienists who were currently working through the Borich needs assessment and the locus for focus model for each task performed in the clinical field. Through the priorities of these two models, a total of 13 items appeared in the common high-level area; "oral health care (disability)," "oral health care (systemic disease)," "applying a rubber dam," "professional mechanical tooth cleaning," "root planing," "taking vital signs," "medication counseling," "wire cutting," "removing cement after removing band/bracket," "delivering bracket," "preparing mini-screw implantation," "dental insurance claim," and "patient reception." Conclusion: Based on the results, the department of dental hygiene should maintain and improve the standardized clinical practice curriculum and clinical dental hygienists' practical skills and contribute to the realization of the legal scope of dental hygienists, reflecting the requirements of clinical fields.

• Korea Science and Art Forum
• /
• v.25
• /
• pp.379-388
• /
• 2016

There are some studies to get rid of slice patterns in coronal and sagittal images by FFT(Fast Fourier Transform) and Notch filter. However, the use of a notch filter is the ringing effect according to the rapid frequency change occurs in common. Therefore, this study will be to evaluate the shape and effect of the notch filter. In addition, it is proposed a new notch filter design. Results of the study are as follows. First, Emission-Notch filter was relatively naturally correcting the cutting pattern. Second, Emission-Notch filter to use as Ringing effect is reduced relatively. The next through these findings and further research progress more completely removed the Ringing effect, and expects to reproduce the data close to the actual human body information.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.4
• /
• pp.65-70
• /
• 2022

In manufacturing and semiconductor industries, transfer robots increase productivity through accurate and continuous work. Due to the nature of the semiconductor process, there are environments where humans cannot intervene to maintain internal temperature and humidity in a clean room. So, transport robots take responsibility over humans. In such an environment where the manpower of the process is cutting down, the lack of maintenance and management technology of the machine may adversely affect the production, and that's why it is necessary to develop a technology for the machine failure diagnosis system. Therefore, this paper tries to identify various causes of failure of transport robots that are widely used in semiconductor automation, and the Prognostics and Health Management (PHM) method is considered for determining and predicting the process of failures. The robot mainly fails in the driving unit due to long-term repetitive motion, and the core components of the driving unit are motors and gear reducer. A simulation drive unit was manufactured and tested around this component and then applied to 6-axis vertical multi-joint robots used in actual industrial sites. Vibration data was collected for each cause of failure of the robot, and then the collected data was processed through signal processing and frequency analysis. The processed data can determine the fault of the robot by utilizing machine learning algorithms such as SVM (Support Vector Machine) and KNN (K-Nearest Neighbor). As a result, the PHM environment was built based on machine learning algorithms using SVM and KNN, confirming that failure prediction was partially possible.

• Current Photovoltaic Research
• /
• v.12 no.2
• /
• pp.37-40
• /
• 2024

One of the current innovation trends in the solar industry is the increase in the size of silicon wafers. As the wafer size increases, the series resistance of the module rises, highlighting the need for research on methods for cutting and bonding solar cells. Among these, the Infrared (IR) laser scribing technique has been extensively researched. However, there is still insufficient optimization research regarding the thermal damage caused by lasers on the Transparent Conductive Oxide (TCO) layer of Heterojunction (HJT) solar cells. Therefore, in this study, we systematically varied conditions such as IR laser scribing speed, frequency, power, and the number of scribes to investigate their impact on the performance of cut cells under each condition. Additionally, we conducted a comparative analysis of thermal damage effects on the TCO layer based on varying scribing depths.

• Steel and Composite Structures
• /
• v.50 no.3
• /
• pp.347-362
• /
• 2024

Controlling vibrations and noise in steel box girders is important for reducing noise pollution and avoiding discomfort to residents of dwellings along bridges. The fundamental approach to solving this problem involves first identifying the main path of transmission of the vibration energy and then cutting it off by using targeted measures. However, this requires an investigation of the characteristics of flow of vibration energy in the steel box girder, whereas most studies in the area have focused on analyzing its single-point frequency response and overall vibrations. To solve this problem, this study examines the transmission of vibrations through the segments of a steel box girder when it is subjected to harmonic loads through structural intensity analysis based on standard finite element software and a post-processing code created by the authors. We identified several frequencies that dominated the vibrations of the steel box girder as well as the factors that influenced their emergence. We also assessed the contributions of a variety of vibrational waves to power flow, and the results showed that bending waves were dominant in the top plate and in-plane waves in the vertical plate of the girder. Finally, we analyzed the effects of commonly used stiffened structures and steel-concrete composite structures on the flow of vibration energy in the girder, and verified their positive impacts on energy regionalization. In addition to providing an efficient tool for the relevant analyses, the work here informs research on optimizing steel box girders to reduce vibrations and noise in them.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.18 no.2
• /
• pp.95-106
• /
• 1998

A study was made to estimate the economic level(Necon.) of mineral nitrogen and a cutting frequency for the dry matter production of reed canarygrass(Phalaris arundinacea L.) in uncultivated rice paddy during the harvested years in 1993~1995. Annual mineral nitrogen was applied at the levels of 0, 90, 180, 270 and 360 kg $ha^{-1}$ in 3 cuttings, 0, 120, 240, 360 and 480 kg $ha^{-1}$ in 4 cuttings, and 0, 150, 300, 450 and 600 kg $ha^{-1}$ in 5 cuttings, respectively. The results were summarized as follows; 1. The dry matter yields of all cutting frequencies in 1993 were significantly higher than in the other hay years. Mean dry matter yield were 14.40, 13.88 and 15.98 tons $ha^{-1}$ in 3, 4 and 5 cuttings, respectively. 2. Significantly higher matter yields were obtained as 15.37 and 15.80 tons $ha^{-1}$ at the level of 120 kg $ha^{-1}\;cut^{-1}$ in 3 and 4 cuttings, and 14.02~14.08 tons $ha^{-1}$ levels of 90~120 kg $ha^{-1}$ in 5 cuttings, respectively. 3. Higher efficiencies of dry matter production in response to mineral nitrogen application were recorded as 29.7 kg at level of 90 kg $ha^{-1}\;yr^{-1}$ in 3 cuttings, 19.6 kg at level of 240 kg $ha^{-1}\;yr^{-1}$ in 4 cuttings, and 20.1 kg at level of 150 kg $ha^{-1}\;yr^{-1}$ in 5 cuttings, respectively. 4. Significantly higher matter yields appeared as 5.02 tons $ha^{-1}$ at 2nd cut in 3 cuttings, 3.94~4.37 tons $ha^{-1}$ at 2nd and 3rd cut in 4 cuttings, and 3.81~3.58 tons $ha^{-1}$ at 2nd and 3rd cut in 5 cuttings, respectively. 5. The highest values of relative dry matter yield were 40.4% for 2nd cut in 3 cuttings, 34.9% for 3rd cut in 4 cuttings, and 31.5% for 2nd cut in 5 cuttings, respectively. 6. The estimated marginal dry matter yields(Ymar.) were 13.8~14.7 tons $ha^{-1}$ at ranges of economic N level of 228.5~291.9 kg $ha^{-1}\;yr^{-1}$ in 3 cuttings, 13.8~14.2 tons $ha^{-1}$ at ranges of 293.5~335.7 kg $ha^{-1}\;yr^{-1}$ in 4 cuttings, and 12.2~12.8 tons $ha^{-1}$ at ranges of 237.5~302.5 kg $ha^{-1}\;yr^{-1}$ in 5 cuttings, respectively. 7. Maximun dry matter yields(Ymax.) were 17.0 tons at the level of limiting N(Nmax.) of 558.9 kg $ha^{-1}\;yr^{-1}$ in 3 cuttings, 16.1 ton at level of limiting N of 531.4 kg $ha^{-1}\;yr^{-1}$ in 4 cuttings, and 13.9 ton at level of limiting N of 546.3 kg $ha^{-1}\;yr^{-1}$ in 5 cuttings, respectively. 8. Economic N level in all cuts were in the ranges of 42.6~123.8 kg $ha^{-1}$ in 3 cuttings, 27.3~144.1 kg $ha^{-1}$ in 4 cuttings, and 9.3~159.4 kg $ha^{-1}$ in 5 cuttings, respectively. 9. The proper cutting frequency for matter production of reed canarygrass was 3 cuttings during the h harvested years in 1993~1995, due mainly to the higher efficiency of N for the dry matter production.

• Journal of Korean Society of Forest Science
• /
• v.109 no.2
• /
• pp.179-188
• /
• 2020

Weeding refers to the process of removing weeds around crop trees, which cause competition in nutrients, moisture, and light, and has a great effect on the early growth and survival of crop trees for establishing forest resources. This study was conducted to find out the timing and method of weeding that is the most suitable for the major afforestation species in national forests. We investigated (1) weeding time and frequency for each afforestation species and (2) the height of crop trees and the length of weeds. Up to 99% weeding operation was carried out until 5 years following afforestation. Pinus densiflora, Larix kaempferi, Chamaecyparis obtusa, Prunus sargentii, and Betula platyphylla plantations accounted for more than 70% of the total weeding sites. Once-a-year weeding process was conducted from late June to late July (67%), and twice-a-year weeding process was the highest in June-August by 31%. Most species were shorter than the weeds until the first and second year of planting, but the height of the crop trees was higher than that of the weeds by 48% in average from the third year. Therefore, from the third year of afforestation, except for some species, it is possible to reduce the cost of weeding operations while reducing nutrient competition by the weeds through the removal of weed sprouts, mainly woody weeds, rather than clear cutting. This study contributes to efficiently develop forest resource establishment while reducing operational costs through a detailed weeding schedule and species-specific method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7B
• /
• pp.608-618
• /
• 2006

The increasing popularity of multimedia streaming services introduces new challenges in content distribution. Especially, it is important to provide the QoS guarantees as they are increasingly expected to support the multimedia applications. The service providers can improve the performance of multimedia streaming by caching the initial segment (prefix) of the popular streams at proxies near the requesting clients. The proxy can initiate transmission to the client while requesting the remainder of the stream from the server. In this paper, in order to apply the prefix caching service based on IETF's RTSP environment to the wireless networks, we propose the effective RTSP handling scheme that can adapt to the radio situation in wireless network and reduce the cutting phenomenon. Also, we propose the traffic based caching algorithm (TSLRU) to improve the performance of caching proxy. TSLRU classifies the traffic into three types, and improve the performance of caching proxy by reflecting the several elements such as traffic types, recency, frequency, object size when performing the replacement decision. In simulation, TSLRU and RTSP handling scheme performs better than the existing schemes in terms of byte hit rate, hit rate, startup latency, and throughput.