• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.168-179
• /
• 1982

The first step to utilize the growing resources of Italian poplar (Populus euramericana I-476) for pulp-Woods, its characteristics and adaptabilities to the pulp industry must be investigated completely. The plantation methods are important for its fast growing in stock, and no less important is the cutting age for its utilization as pulpwood. In this paper, the stone groundwood pulping, refiner groundwood pulping and chemi-groundwood pulping characteristics by the age of tree, along with their physical and chemical characterstics were tested, and relationships between the age groups were analyzed to find out the optimum felling age. The results obtained are as follows: 1. The coefficient of pliability was a little higher in the case of younger trees. 2. The water retention value of each pulp was directly proportional to its physical strength, but this tendency was not detected between the age groups of sample woods. 3. Generally, the physical strength of younger wood pulp was lower regardless of the pulping process. But in the case of pretreatment with NaOH, Asphund and CGP pulp from 5 year old sample wood were stronger in physical strengths than those of GP and Asplund pulp with no pretreatment from 10 years old sample wood. 4. The tear factor of Asplund pulp with alkali pretreatment was higher than that of CGP pulp but the breaking length and the burst factor was similar in all processes. Considering the pulp yield and its brightness, CGP process seems to be advantageous. 5. The dissimilarity of physical strength between 7 and 10 years old wood pulp was not very large in all pulping processes but the physical strength of 5 year old wood pulp was very weak. In the of groundwood pulping from Italian poplar woods, 5 year old wood pulp should be mixed with other long fiber pulp for making a good paper.

• Journal of Korean Society of Forest Science
• /
• v.79 no.4
• /
• pp.359-366
• /
• 1990

This study was carried out to investigate rooting rate, plagiotrophic growth and root-promoting effect of IBA in Taxus cuspidata S, et Z. cuttings. The results obtained were summarized as follows ; 1. As the ortet ages of cuttings were increased in 5, 10, to 20 years, the rooting rates were decreased in order of 85.7%, 81.7% and 62.4%, and the number of primary roots were also decreased in 5.3, 3.7 and 2.9, respectively. 2. Rooting rate by cutting types of lateral shoot were higher than those of main shoot type, significant at the 1% level. 3. IBA(l00ppm) treatment promoted the rooting rates and the number of primary roots. 4. As the ortet ages were increased in 5, 10 to 20 years, angles of central shoot of rooted cuttings which mesured cyclophysis were decreased in order of $75.9^{\circ}$, $68.5^{\circ}$ and $59.6^{\circ}$, respectively, significant at the 1% level. 5. Average angles showed $77.0^{\circ}$ for main shoot cutting, $65.9^{\circ}$ for upper lateral shoot and $61.7^{\circ}$ for lower lateral, which was significant at 1% level, and lateral shoot cutting showed more topophysis than main shoot cutting. 6. Shoot length of rooted cuttings from main shoot cutting was longer than that from lateral shoot significant at the 1% level. 7. Relationship between some characteristics showed highly positive correlation.

• Journal of Preventive Medicine and Public Health
• /
• v.27 no.2 s.46
• /
• pp.230-241
• /
• 1994

Though people occupationally exposed to machineries and automation in the industrialized society desire work involving decreased strength, due to the continuous and repetitive activities, a new industrial stress is present. Studies on prevalence of musculoskeletal disease and their related risk factors have evolved. In this study in relation to work tasks, we investigated the differences in musculoskeletal symptoms occurring In each body region. The results of the survey were as follows. 1. When comparing age, level of education, work duration, job satisfaction and leisure time activities according to work task, age in control group was $38.83{\pm}5.5$, in comparison to the other 2 groups was smaller(p<0.05), and level of education in control group was higher (p<0.05). Work duration in the cutting department was $8.04{\pm}4.99$ years longer than the other 2 groups (p<0.05), but there was no difference in the job satisfaction and leisure time activities. 2. The mean of symptom scores of each work task was 1.54 in the cutting department, 1.57 in the press department and 1.59 in the control group, and there was no significant differnce in the 3 groups. The mean of symptom scores for upper extremities in the control group was low but no statistically significant diffrence was shown. 3. When comparing the mean of symptom score according to work task in the each body region, in the shoulder region, the symptom score in the press department which desired strength was higher than the other 2 groups but no significant difference was shown. In the wrist region the cutting department scored 1.01 and in comparison to the other 2 groups was significantly increased (p<0.05). 4. The results of the univariate regression analysis on the major individual risk factors associated with musculoskeletal symptom relating work showed that previous symptom complaints in the same body region was significant risk factor(p<0.001) in the whole body Besides wrist, hip, and knee, psychological problem was shown to be a significant factor(p<0.05). And the body regions which work task was significant risk factor were wrist and neck region (p<0.05). 5. The results of the multiple regression analysis involving significant factors of each body region from the univariate regression analysis showed that previous symptom complaint in whole body region(p<0.001) and psychological problem in the shoulder, elbow and lumbar region (p<0.05) were significant factors, and work task was significant factor in the wrist (p<0.05).

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.5
• /
• pp.519-526
• /
• 2000

Osteoporosis has recently been recognized as a major health problem in the elderly population. The disorder is manifested as a loss of bone mass accompanied by structural alteration of bone and increased incidence of fracture. Mandible also may be affected. So, I evaluated panoramic views of 66 postmenopausal women for finding the possibility of useful diagnostic mandibular parmeters of osteoporosis. To know the correlationship between skeleton and mandible, the average of the bone mineral density of lumbar from 2nd to 4th by the dual energy X-ray absorptiometry(DEXA, LUNAR DPZ. USA), and age and mandibular parameters, that is, the number of residual teeth, alveolar ridge resorption ratio, panoramic mandibular index (PMI), mandibular cortical width (MCW), angular cortical thickness (ACT), ramus cortical thickness (RCT), morphology of mandibular inferior cortical (MIC) were compared. And I divided the all tested women to the osteoporotic group and non-osteoporotic group by the use of T-score -2.0, which was derived from skeletal bone mineral density (BMD). To find the correlationship of the each group with mandibular parameters, t-test and discriminant analysis were done. The results of the t-test were that all parameters were highly related with 2 groups (p<0.05). Especially ACT, MIC, age have had even higher correlationship than others (p<0.001). The results of the discriminant analysis by the use of these ACT, MIC and age were that the discriminant function was Z = -2.973+(-1.447)$\times$(ACT)+1.131$\times$(MIC score)+(0.052)$\times$(age), the cutting score was 0.257 and the classification accuracy was 84.8%. Therefore I suggest that the consideration of the angular cortical thickness (ACT), the age of patient and the morphology of mandibular inferior cortical(MIC) may help find the osteoporosis.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.1
• /
• pp.8-14
• /
• 2011

This study was conducted to investigate the effect of age of transplants, propagated by cutting, of two cut rose (Rosa hybrida Hort.) cultivars on their subsequent growth and yield in an effort to develop an efficient cutting propagation method for domestic rose cultivars. Two cultivars used in this study were a standard type 'Pink Aurora' and a spray type 'Yellow King'. Cuttings were prepared as single node cuttings each with a five-leaflet leaf and were stuck in rockwool cubes ($5cm{\times}5cm{\times}5cm$, UR, Korea) at two different dates. Cuttings rooted for either 30 (stuck on Jan. 20, 2009) or 48 days (stuck on Jan. 2, 2009) were transplanted into a rockwool slabs ($10cm{\times}15cm{\times}100cm$, UR, Korea) on the same date, 18 Feb. 2009. Plant growth and cut flower quality were investigated for two successive harvests during the period of Jan. to July in 2009. In both cultivars, 48 days old plants showed some growth of the shoot and root before transplanting. However, in the case of 30 days old plants before transplanting no noticeable growth of the shoot and root was obserable in 'Pink Aurora', while only shoot growth, but not root growth to the bottom of the rooting medium, was observed in 'Yellow King'. This suggested cultivar-specific responses that in this experiment a spray type 'Yellow King' showed greater growth rate during the rooting stage than a standard type 'Pink Aurora'. In the measurement of growth and cut flower yield after transplanting, the 48 days old standard type 'Pink Aurora' produced greater number of cut flowers per plant than 30 days old plants, whereas their mean stem fresh weight was recorded smaller than that of the 30 days old plants. For 'Yellow King', 30 days old plants showed greater stem length, flower width, number of five-leaflet leaves per stem, stem fresh weight, and number of cut flowers per plant than 48 days old plants. Therefore, growth and yield were significantly affected by cultivar and age of the rooted cutting, and additional research is needed on the effect of age of rooted cuttings in more cultivars.

• Journal of Korean Society of Forest Science
• /
• v.88 no.2
• /
• pp.195-204
• /
• 1999

To improve nut production and timber quality in a plantation, crown shape controls were suggested for Korean white pines (Pinus koraiensis) under age class III through the analyses of the crown shape controls for seed orchard trees in several species, of crown status of controlled and uncontrolled trees in a Korean white pine seed orchard, and of growth characteristics of plantation trees under age class III. For nut production from the small trees less than 8 m, modified leader type can be applied by cutting the central leader and all branches below 1 m and keeping 4~5 nodes with 3~4 whorled branches a node locating 1 m apart. Trees with a 4~8 m long trunk below the first living branch are shaped into trees for nut and timber production, which have a 4~8 m long knotless stem and a modified leader type crown with 4~5 nodes with 3~4 whorled branches a node at a distance of 1 m. Trees, showing the first living branch at or above 9 m from the surface, are pruned severely for timber production and result in a central leader type containing two fifths of the initial crown. It is advisable to remove the leader and the branches when collecting cones or after/during October to take advantage of easy labor and little resin while cutting. After stem cut, branches showing apical dominance are to be cut to control height when necessary. The removal of the uppermost node may be needed to control the crown shape several years after the initial stem-cut.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.1
• /
• pp.60-65
• /
• 2017

This study was conducted to dentify the optimum plantlet type of 'Solara' potatoes (Solanum tuberosum L.) for growth in an aeroponics system. Plantlets of 'Solara' were transplanted on March 16, 2015 in a greenhouse, and growth and yield characteristics were investigated at 70 and 78 days after transplanting, respectively. Stem length was shorter in plantlet of 15-day-old stem cuttings and acclimatization of culture, and the stem length of plantlets of stem cuttings tended to increase with increasing stem cutting age. The fresh weight of plants was the highest in the plantlets of 40-day-old stem cuttings and the lowest in non-rooted stem cuttings and acclimatization of culture. The highest number of first stolons was obtained in 35-day-old stem cuttings. The number of second stolons was the highest in plantlets of 35-day-old stem cuttings, acclimatization of culture, and 30- day-old stem cuttings. The total number of tubers was higher in plantlets of 35-day-old stem cuttings and acclimatization of culture, and the number of tubers above 3 g was the highest in plantlets of 35-day-old stem cuttings. The weight of tubers above 3 g was the heaviest in plantlets of 35-day-old stem cuttings(1,947 g per 10 plants), followed by plantlets of 30-day-old stem cuttings. These results indicate that plantlets of 30 to 35-day-old stem cuttings could be the best for production of 'Solara' potato tubers in an aeroponics system.

• Journal of Forest and Environmental Science
• /
• v.27 no.3
• /
• pp.195-203
• /
• 2011

Forest in the our country is in the age that needs positive operation in order to foster economical forest. Multiple operations for making valuable forest should be conducted steadily and timely from afforestation to harvesting. In order to execute these kinds of forest operations, the construction of skid trail network that can be effectively used as a pathway for forestry machine and working space is necessary. To investigate facility effect of skid trail network, we executed the location of skid trail network through centroid method by GIS for 50ha of harvesting workplace in mechanized model forest located in Hongcheon, Gangwon Province. As a result of this research, skid trail density in this area changed from 79m/ha with current method to 42m/ha with improved method. It appeared that skid trail density with improved method is nearly half of current method even though the cutting area is the same as the current cutting area. Also, skidding distance changed from 117m with current method to 57m with improved method. It appears that skidding distance with improved method is nearly half of current method even though cutting area was enlarged in adjacent tending cutting area.

• Journal of Korean Society of Forest Science
• /
• v.98 no.3
• /
• pp.225-230
• /
• 2009

Using dynamic programming, which is one of operations research techniques, the best pathway was chosen to maximize the total harvest volume for a Korean white pine (Pinus koraiensis) stand. This study was carried out in an age class III at Chuncheon National Forest, Gangwon province. That stand was assumed to apply 3 different thinning intensities of none, 30% and 50% thinnings. These thinning pathways are planned to implement two times, of thinning at 35 age and 55 age. The final cutting (rotation age) is assumed to carry out in 70 years. A growth function for Korean white pine stand was developed with forest inventory data, the volume was calculated with this growth function. As a result, the best thinning pathway for this Korean white pine stand using dynamic programming is to implement 30% at the first thinning and 50%at the second thinning.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.173-175
• /
• 2012

Temperature during concrete curing can be effectively used to predict the early age strength of concrete However, various current methods have limits to provide the temperature data in real time due to harsh working environment including frequent cutting of wires. This paper presents the results of our investigation of an all-in-one Wireless sensor network (WSN) for the management of the curing temperature of in-placed concrete at early curing stages. Also, the network device for transmission can be easily separated from the probe sensor part and reused consistently. The field experiment entailed measuring the curing temperature of concrete using the WSN. After fresh concrete was poured into the formworks, the signals were measured at a 150 m radius from the field office. The signal was acquired for 28 days without any dispersion or interruption at the construction site; therefore, this study confirms the applicability of the proposed system to a construction site.