• 복식문화연구
• /
• 제1권2호
• /
• pp.145-157
• /
• 1993

This study aimes to investigate the garment ease of pe-school children's clothing in accordance with arm movement. The experiment was done with 4 per-school children fro mage 3 to age 5, and 3 types of experimental clothes were made ; sleeveless, half sleeve, and long sleeve. The waist pattern and the sleeve pattern of each experimental clothes has no garment ease. And experimental clothes were examined to obtain the necessary ease of armcye line and waist lien by cross-cut method. The results of investigation can be summarized as follows ; 1. The resulting movement ranges of experimental clothes with no garment ease were 131.5°(sleeveless), 71.75°(half sleeve), and 62.25°(long sleeve). 2. The size order of cross-cut opening of waist lien movement were (side>front>back), and (half sleeve>long sleeve>sleeveless). 3. When the base point of measurement was set to armpit point by arm the latitudinal length of cross-cut opening of armcye line by arm movement was (anterior armpit part > posterior armpit part), and longitudinal length of cross-cut opening was (upper part>lower part).

• 디지털융복합연구
• /
• 제16권10호
• /
• pp.479-484
• /
• 2018

일제 강점기 여성들 one length hair style의 변천사 및 형태학적 분석을 시도한 연구로서 선행논문과 저서를 바탕으로 형태, 질감, 색상 등 헤어디자인의 구성 요소들을 분석하여 다양한 형태의 one length hair style 커트가 가능해지는데 연구의 목적이 있다. 연구 결과 1910년-1920년대 one length hair style은 커트 길이의 단차가 전혀 없는 out line을 지닌 형태, 자연 그대로의 모발 질감, 자연 모발 색상을 보였다. 1930년대 one length hair style은 약간의 커트 길이의 단차를 보이면서 다이아몬드 형태, 자연스런 질감의 narrow wave, 과산화수소나 oxygenated water을 이용한 약간의 탈색이 이뤄졌다. 1940년대 one length hair style은 형태, 질감, 색상 면에서 화려한 미(美)를 추구하려는 특이점이 발견되지 않았다. 본 연구를 통해 one length hair style에 관한 심층적이고 세분화 된 후속 연구가 가능해지며, 헤어미용 교육의 기초 자료 및 뉴 모드의 트렌드 개발을 위한 초석으로 작용하리라 사료한다.

• 복식
• /
• 제56권4호
• /
• pp.48-64
• /
• 2006

The purpose of the study was to demonstrate how to recreate spencer jacket in the empire style in an attempt to apply this historic style to theatrical costumes and other high fashion items in modern times. The study was carried out through 2 steps. (1)Block patterns of spencer jacket of its basic design were developed through draping based on the design characteristics mentioned above. (2)Spencer jackets of three designs, which were the typical designs of each category have been made of velvet to find out more specific structural characteristics. The structural characteristics of Spencer jacket in draping were as follows: (1)Jacket length position was suitable 9cm below body's bust line and neckline should be enlarged front & side neck point 2cm, back neck point 1.5cm. (2)Cut out the front bodice after CF line moved 1cm outwards and bust dart amount should not exceed 2-3cm. Shoulder point moved inwards. (3)Side back grain line was parallel to princess line of the back bodice. Add 0.5cm ease to the under arm of the front and side bark bodice, it was good for the activity of arm. (4)Armhole line was trued as maintaining to across back width 14-15cm at least. Shoulder line was to connect from the point 2cm depart shoulder point along armhole line to point 2cm side neck point along neck line. (5)Sleeve length was suitable 70cm, cut out the bias direction to move forwards the grain line from shoulder point. Puff position was good from the 2cm depart shoulder point to shoulder line.

• 소성∙가공
• /
• 제15권4호
• /
• pp.311-318
• /
• 2006

One of the most important quality problems in flat plate leveled from hot rolled coils in cut-to-Iength lines is bowing and cambering when they are cut in small width parts. It is verified analytically and experimentally that residual stress remained in plate is th ε source of the problem. In order to produce low residual stress flat plate from hot rolled coils, the proper conditions of leveling are studied and two things are implemented. One is proper plastic deformation area ratio to reduce residual stress within customer requirement by applying suitable plastic deformation and maintain leveling load within structural strength limit of leveler. The other is maintaining uniform plastic deformation along the width of the plate during leveling. Customer requirement for residual stress is met by applying above 70% of plastic deformation area ratio and uniform deformation along width of coil by adjusting back up rolls according to deformation analysis of work roll and back up roll assembly and leveling tests.

• Journal of Biosystems Engineering
• /
• 제24권1호
• /
• pp.67-74
• /
• 1999

A prototype cut-flower sorter was developed and tested for its performance with five varieties of roses. Support plates driven by a chain mechanism transported the roses into an image inspection chamber. Color image processing algorithms were developed to evaluate the length, thickness, and straightness of stem and color, height, and maturity of bud. The average absolute errors of the system for the measurements of stem length, stem thickness, and height of bud were 19.7 mm, 0.5 mm, and 3.8 mm, respectively. The results of classification by the sorter were compared with those of a human inspector for straightness of stem and maturity of bud. The classification error for the straightness of stem was 8.6%, when both direct image and reflected image by a mirror were analyzed. The accuracy in classifying the maturity of bud varied among the varieties, the smallest for‘Nobless’(1.5%) and the largest for‘Rote Rose’(13.5%). The time required to process a rose averaged 2.06 seconds, equivalent to the capacity of 1,600 roses per hour.

• 패션비즈니스
• /
• 제10권6호
• /
• pp.122-130
• /
• 2006

The purpose of this study is to develop the appropriate brassiere pattern for women. Total of 6 brands with same design and 75A, 80A size brassieres(total 12 brassieres) were compared and analyzed for pattern, cup size and patterns. SPSS 10.1 statistic process was used for data analysis. The outcom of this study is summarized as follows. Total length of brassiere by grade were performed smaller than the standard difference 5cm. For 1/2 front cover length, There were no significant differences between 75 and 80. The reason for lower line of wing is shorter than upper line of wing is because side support is cut side ways considering lower line of wing is sewn more toward front than upper line of wing. Even it is same A cup size most cup related sizes become larger according to underbust comparing with cup capacity, they range from 146.67cc to 172.83cc for same A cups. Among same A cups with difference underbust there was average of 26.16cc differences. For relations of material, sewing technology and expansion rate, all 6 brands had zigzag type sewing for upper line tape. For every 0.3cm height, there were $17{\sim}21$ stitches. When urethane mixture is similar expansion rate is higher while number of 1 inch zigzag are high. For elasticity, zigzag stitch expand side ways for more expansion.

• 한국의류학회지
• /
• 제18권5호
• /
• pp.602-614
• /
• 1994

The purpose of this study was to suggest the proper ease of total crotch length concerning both appearance and comfort. The research processes as follows. 1) For the purpose of obtaining the necessary ease of slacks in body movement, experimental slacks of no ease of total crotch length were made. Three college girls putting on these experimental slacks were examined on their back middle waist lines using cross-cut method. 2) Experimental slacks for suggesting the proper ease consist of 7 types; slacks CO, Wl, W3, W5, W7, C3, C5. The sensory evaluation for appearance and comfort was applied to evaluate the 7 slacks. The results can be summarized as follows. 1. As the leg-movement angle increased, the vertical space increased and the horizontal space decreased. There was negative relationship between vertical and horizontal space. And as the leg.movement angle increased, the area of space increased. The shapes of space showed the amounts of space and the direction of force by the movements. 2. The appearances of slacks C3, W3, C5 were better than the other slacks. The eases of the crotch were better than those of the waist line in appearance. And slakcs W7 was better than any other , ;lacks in comfort. When the amount of each part of eases was same, the comfort in eases of crotch was not as good as that of waist line. 3. In slacks, the proper ease of total crotch length was 3% and 5% of total crotch length.

• 한국생활과학회지
• /
• 제18권3호
• /
• pp.793-798
• /
• 2009

Hair cut is one of the best useful technical tool for hair styling. In this study using the rule of the layers of hair design, balanced for visual art, perceptual ability and form created by the principles of analysis and offer hair cuts and hair design of the representation of regions and even hair design as the basis of a student of Hair Beauty and all the people working in the field can create a variety of hair design puts the purpose to establish a basis. The result of this study can be outline as follows: First, the step line and the movement of the relationship between the law of the layers above and below the length of the same layer techniques, the same consists of a vertical cross-section of the overall round shape of the cut same layer is created and the appropriate volume and movement, the movement of low-layer round a little bit more feeling and expression is used when you want. High-layer used to want to move a lot of light and could see that. Second, the layer of the Law and over direction, lifting, section, the line control. weight control and analyzed by principle and the principle of the process of forming the written form was unknown. Third, hair design, the expansion of the expressive power of the law of the layers, and the section of the over direction depends on the presence of line control to express the length of the outline I had to, lifting the weight to adjust form controls, and the expression of Hair Design will be expanding the width. A hair designer, a layer style to create a zone he thought the law of the first layer formative area To further the reach will be a lot of research, leading up formative aspects of this research thesis do not have missing parts, or as a result of the Beauty of Hair Design and the width of a hair design education in the field can perform to help feed the reference materials that will be.

• 복식
• /
• 제52권8호
• /
• pp.29-39
• /
• 2002

It was increased leisure hours by automation and computerization of industry. Many people spend on hours in enjoying leisure sports, and then. nowadays, Many women tend to prefer casual wear to formal suits. The purpose of this research was to design of outdoor-wear that improve the functional and aesthetic effects for clothing comfort. Total 4 design prototype consisting of jumper and slacks were developed for this research. Outdoor-wear design forced on armhole type of jumper and ease of the back crotch length of slacks to improve the functional and aesthetic effects. And Outdoor-wear design focused on color harmony to aesthetic effects. Ease amount and materials of jumper and slacks were controlled. Design A: Jumper was designed as dropped shoulder with set-in steeve and band collar, A break-away zipper to facilitate ventilation control were made the area of back of jumper and the area of outside seam line of slacks Color of jumper and slacks were olive green color. Ease amount of the crotch length of slacks pattern was constructed as 7% of total crotch length: Design B 4DM cut pattern were applied to the jumper and slacks pattern. A break-away zipper to facilitate ventilation control were made the area of back of jumper and the area of inside seam line of thigh. Color of jumper and slacks were grey and orange color. Ease amount of the crotch length of slacks pattern was constructed as 5% of total crotch length. Design C : Jumper was designed as the set in sleeve and hood. and A break- away zipper to facilitate ventilation control were made the ares of the armhole and elbow. Color of jumper and slacks were ivory and orange color. Ease amount of the crotch length of slacks pattern was constructed as 5% of total crotch length. Design D : Jumper was designed as raglan sleeve. Color of jumper and slacks were olive green color. Ease amount of the crotch length of slacks pattern was constructed as 5% of total crotch length. Total six females, ages 20-45, served as subjects for this research. Subjects have standard body type, generally, wearing 66 size of ready-to-wear clothing. The performance of the newly designed outdoor-wear was evaluated for their effectiveness in several aspects such as conditions of skin temperature, sensory evaluation of comfort during body movements, appearance and color harmony and aesthetic collar design. Design 3 was appeared to be the most positive in aesthetic evaluation and functional effects of design 2 of 4DM cut pattern was appeared to be beter than other designs.

• International Journal of Korean Welding Society
• /
• 제3권1호
• /
• pp.2-7
• /
• 2003

Laser welding application for car body manufacturing has many advantages in the stiffness and the lightness of vehicle, the productivity of assembly line, and the degree of freedom in design. This presentation will express the innovation of car body manufacturing including parameter optimization, process modeling, and system integration. In this application the investment for systems was cut down dramatically by real time switching over the laser path between two welding stations. Points of technical discussion are as follows; optimization of parameters such as laser power, robot speed and trajectory, compact and useful design of jig & fixture to assure welding quality for 3 sheet-layer zinc-coated steel, system integration between 4㎾ Nd:YAG laser device and the other systems, on-line real time welding quality monitoring system, perfect safety standards for high power laser, minimization of consumption costs such as arc lamp, protective glass for optic, etc. This application was successfully launched mass production line in 2001. The laser-welded line of side panel consists of 122 stitches totally. And the length is about 2.4m.