• 제목/요약/키워드: Cut-slope

검색결과 420건 처리시간 0.03초

경상분지 셰일 지역에서의 절토사면 파괴 특성 (Failure Characteristics of Cut Slopes of Shale in Ky ngsang Basin)

  • 김경석;유병옥;이상돈
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2002년도 암반역학위원회 학술세미나 논문집
    • /
    • pp.103-114
    • /
    • 2002
  • Stability of cut-slope is considered to have a deep relationship with rock types since rock has its own engineering and geological characteristic such as shear strength, durability, weathering profile, geological structures. Therefore, analysis of geological and engineering characterisics of rock mass is essential for the evaluation of rock slope stability This paper introduces the statistical data of slope failure cases which was collected from highway slopes constructed in sedimentary rock mainly of shale in Ky ng-sang Basin. Primary failure feature in this area is planar failure along the bedding regardless of slope geometry. Even a disasterous slope failure case due to the thick clay layer between the beddings was reported. Failures and rock fall were reported to ocurred frequently after the completion of cutting due to the weathering, so long-term slope stability should be considered as a important factors in design.

  • PDF

강우침투로 인한 대절취사면의 붕괴안정성검토 및 대책 (Stability Analysis and Reinforcement of Large Excavated Slope considering Precipitation Infiltration in Rainy Season)

  • 천병식;최현석
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제4권1호
    • /
    • pp.101-110
    • /
    • 2000
  • In case heavy rainfall is a key factor of slope failure, the failure zone is usually developed within the depth of 3~5m from the ground surface regardless of the location of the watertable. If rainfall is taken into consideration, it is general that the slope stability analysis is carried out under the assumption that the cut slope is saturated to the slope surface or the watertable elevates to a certain height so that ${\gamma}_{sat}$, the unit weight of saturated soil, is used. However, the analysis method mentioned above can't exactly simulate the variation of pore water pressure in the slope and yields different failure shape. The applicability of slope stability analysis method considering the distribution of pore water pressure within the slope with heavy rainfalls, was checked out after the stability analysis of a lage-scale cut slope in a highway construction site, where surface failure occurred with heavy rainfalls. An appropriate slope stabilization method is proposed on the base of the outcome of the analysis.

  • PDF

코이어블록(Coir-Blocks)을 이용한 절토사면의 경관개선 및 비점오염원 관리에 관한 연구 (A Study on Landscape Improvement of Cut-Slopes and Management of Non-Point Pollution Using Coir-Blocks)

  • 이관준;박율진
    • 한국환경복원기술학회지
    • /
    • 제18권5호
    • /
    • pp.27-36
    • /
    • 2015
  • This study was conducted to grasp the effect of afforestation of cut slope using coir blocks on the improvement of scenery and the management of non point pollution source. Total four experimental tanks such as general soil slope, coir blocks, installation slope, slope refilling the inside of coir blocks slope with pebble, slope refilling the inside of coir blocks with soil and plant were installed, pollution source water was supplied and the possibility of reduction management of non point pollution source was analyzed at four items of COD, SS, T-N, T-P and main results drawn from this study are as follows. In conclusion, biodegradable materials like coir blocks and soil and plant layers are judged to be helpful in reduction management of non point pollution source inflowing to water space from land area. Thus, the reduction of non point pollution source occurring at land area is thought to be fully controlled at the cut slope, the space prior to inflowing to water ecological space like a stream or a swamp area.

깎기비탈면 침투해석을 위한 최소 안전율 적용성 고찰 (Consideration of Minimum Safety Factors for Cut-slope Infiltration Analysis)

  • 이정엽;이종현;옥영석;구호본
    • 지질공학
    • /
    • 제22권4호
    • /
    • pp.375-385
    • /
    • 2012
  • 본 연구에서는 강우지속시간과 강우종료 후 침투에 의한 깎기비탈면 안전율 변화를 고찰하였다. 강우강도와 강우지속시간의 다양한 조건에서 깎기비탈면의 침투특성과 안전율 변화는 soilworks 프로그램으로 분석하였다. 분석 결과, 깎기비탈면 안전율은 강우 종료 후에 간극수압의 증가로 추가적으로 감소하여 최소 안전율에 도달한다. 강우지속시간 동안 안전율 감소율보다 강우종료 후 안전율 감소율이 더 큰 경우도 발생하게 되므로, 깎기비탈면 침투해석 시 유의해야 할 것이다.

Effect of Extreme Rainfall on Cut Slope Stability: Case Study in Yen Bai City, Viet Nam

  • Tran, The Viet;Trinh, Minh Thu;Lee, Giha;Oh, Sewook;Nguyen, Thi Hai Van
    • 한국지반환경공학회 논문집
    • /
    • 제16권4호
    • /
    • pp.23-32
    • /
    • 2015
  • This paper addresses the effects of extreme rainfall on the stability of cut slopes in Yen Bai city, Northern Viet Nam. In this area, natural slopes are excavated to create places for infrastructures and buildings. Cut slopes are usually made without proper site investigations; the design is mostly based on experience. In recent years, many slope failures have occurred along these cuts especially in rainy seasons, resulting in properties damaged and loss of lives. To explain the reason that slope failure often happens during rainy seasons, this research analyzed the influence of extreme rainfalls, initial ground conditions, and soil permeability on the changes of pore water pressure within the typical slope, thereafter determining the impact of these changes on the slope stability factor of safety. The extreme rainfalls were selected based on all of the rainfalls triggering landslide events that have occurred over the period from 1960 to 2009. The factor of safety (FS) was calculated using Bishop's simplified method. The results show that when the maximum infiltration capacity of the slope top soil is less than the rainfall intensity, slope failures may occur 14 hours after the rain starts. And when this happens, the rainfall duration is the deciding factor that affects the slope FS values. In short, cut slopes in Yen Bai may be stable in normal conditions after the excavation, but under the influence of tropical rain storms, their stability is always questionable.

억지말뚝을 이용한 점성토지반 절토사면의 설계 (The Use of Piles to Cut Slopes Design in Cohesive Soils)

  • 홍원표;한중근;송영석
    • 한국지반공학회논문집
    • /
    • 제15권5호
    • /
    • pp.157-170
    • /
    • 1999
  • 본 연구에서는 억지말뚝을 이용한 점성토지반 절토사면에 대한 새로운 설계법이 제안된다. 이 설계법에서는 사면의 기울기와 높이, 억지말뚝열의 수와 설치위치, 말뚝의 간격과 강성 등의 요소를 체계적으로 선택할 수 있게 되어 있다. 이 설계법은 줄말뚝을 포함한 사면의 안정해석법에 근거하여 확립될 수 있다 말뚝으로 사면을 안정시킬 수 있는 기본적인 개념은 줄말뚝이 산사태와 같은 측방변형지반속에 설치되어 있을 경우 말뚝사이의 지반이 지반아칭현상에 의하여 억지 될 수 있다는데 있다. 줄말뚝을 포함한 사면의 전체안정을 검토하기 위하여 말뚝안정해석과 사면안정해석이 동시에 실시되어야 한다. 제안된 설계법에 따라 설계된 점성토지반 절토사면에 계측기를 설치하여 말뚝 및 말뚝사이 지반의 거동을 면밀히 관찰하였다. 이를 통하여 점성토지반 절토사면에 설치된 억지말뚝의 사면안정효과를 확인할 수 있었다.

  • PDF

개착사면의 안정성 해석을 위한 횡단면 기법의 활용성 고찰 (A Study of the Applicability of Cross-Section Method for Cut-Slope Stability Analysis)

  • 조태진;황택진;이근호;조계성;이상배
    • 터널과지하공간
    • /
    • 제22권1호
    • /
    • pp.43-53
    • /
    • 2012
  • 개착면의 방향성과 규모가 점진적으로 변화되는 개착사면의 안정성을 지반의 암석학적, 구조적 및 역학적 특성을 종합적으로 고려한 횡단면 분석기법을 활용하여 분석하였다. 시추작업을 수행하여 획득한 코어시료를 관찰하여 사면지반의 암석학적 취약성을 조사하였으며, 시추공 내 BIPS 영상을 획득하여 사면 내부의 구조적 특성을 규명하였다. 시추코어 및 코어절리시료를 이용한 암석실험을 통해 사면 지반의 공학적 특성을 분석하였다. 평사투영해석을 수행하여 잠재적인 사면거동 양상과 거동유발 절리들을 분석하였으며, 거동유발 절리들의 트레이스 분포를 개착 형상이 고려된 횡단면상에 도시하였다. 횡단면에 분포된 평면파괴 절리들이 기저면을 형성하는 평면블록들을 절리 트레이스 분포를 고려하여 설정하였다. 횡단면 상에서 심도별 평면블록들의 안정성과 적정 안전율을 유지하기 위하여 요구되는 지보량을 산정하여 최적 사면 설계안 수립에 대한 횡단면 기법의 활용성을 고찰하였다.

깎기비탈면 안정성의 통계적 예측기법 (Statistical Estimate Technique of Cut Slope Stability)

  • 이문세;신창건;전국재;이승우
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2010년도 추계 학술발표회
    • /
    • pp.727-735
    • /
    • 2010
  • The collapse of cut slope near national roads in Korea mostly occurs in every summer when typhoon or localized heavy rain comes. Such collapse brings about a loss of many lives and property and recently the damage is on rapidly increasing trend. Therefore, we may reduce the loss of many lives and property in great deals if we can predict and prepare for the collapse of cut slope. However, it is not easy to predict collapse because there are many factors causing collapse in combination and all they have different levels of contribution. Therefore, this study completed prediction formula by using a statistic technique for quantitative analysis on the interaction of those factors so as to predict the stability of slopes. Consequently, it is judged that effective slope management will be possible by selecting dangerous slopes quantitatively among cut slopes near national roads and by preparing for the collapse in advance.

  • PDF

지형요인에 의한 절토사면 붕괴사례 (A Case Study on Cut Slope Failure due to the Geomorphological Factor)

  • 김승현;최지용;이종현;이정엽;구호본
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 춘계 학술발표회
    • /
    • pp.1161-1170
    • /
    • 2009
  • The Roads in Gangwon Province generally was made on purpose to use the military road. In case of these roads, tremendous dangerous cut slopes do exist and its road linear shape was badly designed. In order to make up for this situation, the government has continuously established the new road or performed the public works such as the straight line of the curved road. Soksil 2 cut slope was made through the road improvement work. This has small surface failures and collapses. In spite of dry season, this slope are leaking lots of groundwater at the unbelievable point. So as to get curious phenomenon right, we performed a detailed field investigation, the geomorphological analysis, the stability analysis considering field characteristic and ultimately proposed the countermeasure to make sure stability of Sokil 2 cut slope.

  • PDF

언양-밀양 간 국도24호선 석남고개 주변부 절토사면 지반특성 (Geotechnical Characteristics of Road Cut Slope in National highway 24 at Suknam pass, Eonyang-Milyang area)

  • 김승현;구호본;이종현;김승희
    • 한국방재학회:학술대회논문집
    • /
    • 한국방재학회 2008년도 정기총회 및 학술발표대회
    • /
    • pp.589-592
    • /
    • 2008
  • 울산광역시 울주군 상북면에서 경상남도 밀양시 산내면을 잇는 국도 24호선은 왕복 2차선으로 기존 도로의 선형이 매우 불량하고, 위험절토사면이 집중적으로 분포되어 있다. 2002년에는 관련기관과의 연계로 울주-밀양 간 국도 24호선의 도로절토사면에 대한 현황조사가 실시되었으며, 그 중 57개소 현장은 위험절토사면으로 분류하여 추가적인 상세 현장조사가 실시되었으며, 불연속면의 방향에 관한 다양한 정보들이 취득되었다. 2002년에는 관련기관과의 연계로 울주-밀양 간 국도 24호선의 도로절토사면에 대한 현황조사가 실시되었으며, 그 중 57개소 현장은 위험절토사면으로 분류하여 추가적인 상세 현장조사가 실시되었으며, 불연속면의 방향에 관한 다양한 정보들이 되었으며, 이에 대한 길이별, 경사별 분포현황, 불연속면 발달상태 등 여러제반 특성을 살펴 보았다.

  • PDF