• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.5
• /
• pp.48-58
• /
• 2003

This study was carried out to select proper species for early stage replantation in granite forest road cut-slope. From one to thirteen year elapsed forest roads in five regional areas of Chungcheong-do and Kyungsangbuk-do, sample plots were selected, and their vegetations and environmental factors were investigated. Soil organic matter, total nitrogen, soil moisture content, and bulk density in the granite weathering soils were below 0.5%, 0.02%, 10%, and above 1.2g/$cm^3$, respectively. The environmental factors affecting distribution of species in the granite forest road were the elapsed year, elevation, cut-slope aspect, and cut-slope. Sowing plants of Dactylis glomerata, Lolium perenne, and Eragrostis curvula were found in the early stage of forest road-cut. Annual herbs of Youngia denticulata, Erigeron annuus, etc. were found in the 2-3 years elasped forest road-cut. Perennial herbs of Artemisia princeps var. orientalis, Miscanthus sinensis, etc., parachute woody plants of Weigela subsessilis, Pinus densiflora, etc., and gravitative trees of Prunus sargentii, Lindera obtusiloba, Quercus sp., etc. were found in the forest road cut-slope after 3 years of road-cut. Leguma of Lespedeza cureata, Amorpha fruticosa, Lespedeza bicolor, Pueraria thunbergiana, Albizzia julibrissin, etc., herbs of Artemisia keiskeana, Artemisia princeps var. orientalis, Miscanthus sinensis, etc., and woody plants of Rubus crataegifolius, Weigela subsessilis, Zanthoxylum schinifolium, Pinus densiflora, etc. were considered as proper species for replantation in granite forest road cut-slope.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.1
• /
• pp.12-20
• /
• 1998

This study was carried out from June 1996 to November 1997 to analyze the growth characteristics of the introduced species revegetated on highway cut-slopes. The number of revegetation measures type surveyed were fourteen such as seed-spraying measures, block-sod pitching measures, and hydro-seeding measures with seed-fertilizer-soil materials. The introduced species for revegetation measures were mostly Festuca arundinancea(cool season grass), Eragrostic curvula(warm season grass), Lolium perenne(cool season grass), Dactylis glomerata(cool season grass), Poa pratensia(cool season grass). The species diversity index of the upper part on highway cut-slopes were greater than that of the middle part and lower part. The growth of introduced species was good on north-facing cut-slope than the others and that was flourish in temperate north forest zone. Also, the introduced species seemed to decrease or disappear, while the ratio of native woody and herb species which were in mature stage seemed to increase.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.207-210
• /
• 2000

본 논문에서는 신호를 해석하는데 유용한 웨이블렛 변환을 적용하여 장면전환 요소 중 cut과 fade를 검출하는 알고리즘을 제안한다. 제안된 방법은 웨이블렛 저대역 부밴드로부터 각 프레임의 히스토그램을 구한 후 이전 프레임과 현재 프레임사이의 히스토그램 차를 구하여 이 값이 임계값 이상이면 급격한 장면전환(abrut shot transition)인 cut으로 분류한다. 다음으로 페이드인(fade in)이나 페이드 아웃(fade out)등 컷의 지점이 불분명한 점진적 장면전환(gradual scene transition)을 검출하기 위하여 고대역 부밴드에서 추출한 에지성분에 모멘트를 계산하여 인접한 프레임 사이의 변동율을 분석하여 값이 증가하면 페이드 인을 검출하고 반면에 감소하면 페이드 아웃을 검출하게된다. 성능평가를 위하여 실제의 비디오 분할에 적용한 결과 웨이블렛 적용 방법론이 매우 높은 Precision을 갖는다는 것을 알 수 있으며 윤곽정보에 모멘트 정보를 더함으로써 기존의 방법보다 정확한 페이드(fade) 구간을 검출할 수 있었다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.1
• /
• pp.24-31
• /
• 2003

In the gas cutting of plate steel, the quality of the cut surfaces and sections is strongly dependent on the cutting conditions such as cutting speed, kerf width, plate thickness, material, distance between tip and specimen, and cutting oxygen pressure etc. The cutting tests of plate steel were carried out using CNC gas cutting machine. This paper deals with cut surface and section characteristics of plate steel in CNC gas cutting. Both top and bottom widths of kerf, the surface roughness(Ra, Rmax) of cutting surfaces are measured under various cutting conditions such as cutting speed, material, distance between tip and specimen, and cutting thickness. The photographs of cut surface and cut section are also analyzed under various cutting conditions.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.12
• /
• pp.86-92
• /
• 2002

This paper presents a new model of NC verification in NC milling using z-map. The model can describe the motion of machine tool like a real machine effectively. The model uses x, y, and z directional feed rate as well as cutting data for modeling Z-map of workpiece. The model verifies the over-cut, the under-cut and the surface topography using NC codes and cutting conditions. To investigate the performance of the model, simulation study was carried out. As the results, the model gave the geometry accuracy of workpiece, the surface topography, and the chip loads.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.4
• /
• pp.831-837
• /
• 2014

This paper focuses on the effects of the changes in the resistance characteristics caused by the changes of the POD shape installed in the Hydrofoil vessel, using the CFD(Computational Fluid Dynamics). We input the POD sections' basic shape as the origin of the x and y axis. Then as we cut the x-axis 0 to 2 cm, and the more we cut it, the total resistance value had increased. However, we have recognized the fact that as we cut the POD section, 3 to 5 cm, the resistance value had rather decreased. Furthermore we found out the result that as the cut partition was larger; the POD cross-section would decrease, resulting in the linear decrease of the viscous force.

• Journal of the Korean Society of Industry Convergence
• /
• v.4 no.4
• /
• pp.365-369
• /
• 2001

This paper presented a new model of virtualized CNC milling machine. The model verifies the over cut, the under cut and the surface roughness using NC file generated from CAM and cutting condition. The model uses Z-map model to verify workpiece. In this paper, the model used the velocities of x, y and z direction and obtained a center point of a hall end mill for modeling Z-map of workpiece. To investigate the performance of the model, simulation study was carried out. As the results, the model gave geometry accuracy of workpiece, the surface roughness and the chip loads in finish cutting that can predict tool chipping. The virtualized CNC machine can he used a flat end mill, a ball end mill and a rounded end mill.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.725-729
• /
• 2000

This paper presented a new model of NC verification in ball end milling. The model verifies the over cut the under cut and the surface roughness using NC file generated from CAM and cutting condition. The model uses Z-map model to verify workpiece. In this paper, the model used the velocities of x, y and z direction and obtained a center point of a ball end mill for modeling Z-map of workpiece. To investigate the performance of the model simulation study was carried out. As the results, the model gave geometry accuracy of workpiece, the surface roughness and the chip loads in finish cutting that can predict tool chipping.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.172-177
• /
• 2005

The object of this experiment is comparing heat transfer performance and pressure drop characteristics by baffle cut rate, fluid velocity and heating temperature. Experiments were carried out in cross flow heat exchanger with water as a working fluid. In this experiment, baffle cut rate is 30%, 40%, 50%, velocity is 0.5m/s, 1.0m/s, 1.5m/s, and heating temperature is $30^{\circ}C$, $40^{\circ}C$, $50^{\circ}C$. An experimental device to measure the heat transfer coefficient was constructed. The experimental result were obtained for the fully developed turbulent flow of water in tube on the condition of uniform heat flux.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.4 s.97
• /
• pp.220-228
• /
• 1999

The machining accuracy has been improved with the development of NC machine tools and cutting tools. However, it is difficult to obtain a high degree of accuracy when machining deep pocket with long end mill, since machining accuracy is mainly dependant on the stiffness of the cutting tool. To improve surface accuracy in machining deep pocket using end mill, the performance by down cut and up cut is compared theoretically and experimentally. To verify usefulness of up milling, various experiments were carried out. As a result, it is found that up milling produce more accurate surface than down milling in machining deep pocket. For effective application of up milling, various values in helix angle, number of teeth, radial depth of cut and axial depth of cut are applied in experiment.