• Smart Structures and Systems
• /
• v.23 no.2
• /
• pp.141-153
• /
• 2019

This research deals with wave propagation of the functionally graded (FG) nano-beams based on the nonlocal elasticity theory considering surface and flexoelectric effects. The FG nano-beam is resting in Winkler-Pasternak foundation. It is assumed that the material properties of the nano-beam changes continuously along the thickness direction according to simple power-law form. In order to include coupling of strain gradients and electrical polarizations in governing equations of motion, the nonlocal non-classical nano-beam model containg flexoelectric effect is used. Also, the effects of surface elasticity, dielectricity and piezoelectricity as well as bulk flexoelectricity are all taken into consideration. The governing equations of motion are derived using Hamilton principle based on first shear deformation beam theory (FSDBT) and also considering residual surface stresses. The analytical method is used to calculate phase velocity of wave propagation in FG nano-beam as well as cut-off frequency. After verification with validated reference, comprehensive numerical results are presented to investigate the influence of important parameters such as flexoelectric coefficients of the surface, bulk and residual surface stresses, Winkler and shear coefficients of foundation, power gradient index of FG material, and geometric dimensions on the wave propagation characteristics of FG nano-beam. The numerical results indicate that considering surface effects/flexoelectric property caused phase velocity increases/decreases in low wave number range, respectively. The influences of aforementioned parameters on the occurrence cut-off frequency point are very small.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.23 no.6
• /
• pp.187-200
• /
• 2020

Despite the eco-friendly route plan, road slopes were collapsed due to road construction, resulting in human and property damage. To solve this problem, the Ministry of Land, Transport and Maritime Affairs established guidelines in 2009 to conduct a test-bed for slope recording considering the conditions of the site and the ecological environment, and divided them into recording quality and economic evaluation. The following results were obtained by analyzing 183 construction methods of cut-soil sections at 60 sites from 2012 to 2018 for road slope afforestation research. Straw net+seedspray, vegetation media spray method 1T, 3T were used the most, and vegetation media spray method 3T(patent) was excellent in quality, and straw net+seedspray was excellent in economics. As a result of analyzing the market unit price and the construction unit price, vegetation media spray method submitted the construction unit price at up to 60% lower than the market unit price. As a result of the analysis of the key factors of the greening method evaluation, the economic assessment had the greatest influence on all evaluation items. Problems in the evaluation method of revegetation were first identified as problems in the allocation of points and secondly as problems in the evaluation criteria. As for the improvement of the economic assessment criteria, the method was proposed to evaluate the same method based on market unit price when the same method was constructed, and not to conduct an economic assessment if there was a difference in market unit price between methods, or to add weight to the scores. Based on the monitoring data of 60 road slopes, this study drew up problems and improvement measures. However, with regard to scoring, research on appropriate scoring is needed by examining the current status.

• Clinical Endoscopy
• /
• v.56 no.5
• /
• pp.633-649
• /
• 2023

Background/Aims: Mechanical properties (MPs) and axial and radial force (AF and RF) may influence the efficacy and complications of self-expandable metallic stent (SEMS) placement. We measured the MPs of various SEMSs and examined their influence on the SEMS clinical ability. Methods: We evaluated the MPs of 29 types of 10-mm SEMSs. RF was measured using a conventional measurement device. AF was measured using the conventional and new methods, and the correlation between the methods was evaluated. Results: A high correlation in AFs was observed, as measured by the new and conventional manual methods. AF and RF scatterplots divided the SEMSs into three subgroups according to structure: hook-and-cross-type (low AF and RF), cross-type (high AF and low RF), and laser-cut-type (intermediate AF and high RF). The hook-and-cross-type had the largest axial force zero border (>20°), followed by the laser-cut and cross types. Conclusions: MPs were related to stent structure. Hook-and-cross-type SEMSs had a low AF and high axial force zero border and were considered safest because they caused minimal stress on the biliary wall. However, the increase in RF must be overcome.

• Economic and Environmental Geology
• /
• v.5 no.4
• /
• pp.187-209
• /
• 1972

Drilling position is one of the most important factors affecting on the blasting effects. There has been many reports on several blasting factors of burn-cut by Messrs. Brown and Cook, but in this study the author tried to compare drilling positions of burn-cut to pyramid-cut, and also to correlate burn-cut effects of drilling patterns, not being dealt by Prof. Ito in his theory, which emphasized on dynamical stress analysis between explosion and free face. According to former theories, there break out additional tensile stress reflected at the free face supplemented to primary compressive stress on the blasting with one-free-face. But with these experimented new drilling patterns of burn-cut, more free faces and nearer distance of each drilling holes make blasting effects greater than any other methods. To promote the above explosive effect rationary, it has to be considered two important categories under-mentioned. First, unloaded hole in the key holes should be drilled in wider diameter possibly so that it breaks out greater stress relief. Second, key holes possibly should have closer distances each other to result clean blasting. These two important factors derived from experiments with, theories of that the larger the dia of the unloaded hole, it can be allowed wider secondary free faces and closes distances of each holes make more developed stress relief, between loaded and unloaded holes. It was suggested that most ideal distance between holes is about 4 clearance in U. S. A., but the author, according to the experiments, it results that the less distance allow, the more effective blasting with increased broken rock volume and longer drifted length can be accomplished. Developed large hole burn-cut method aimed to increase drifting length technically under the above considerations, and progressive success resulted to achieve maximum 7 blasting cycles per day with 3.1m drifting length per cycle. This achievement originated high-speed-drifting works, and it was also proven that application of Metallic AN-FO on large hole burn-cut method overcomes resistance of one-free-face. AN-FO which was favored with low price and safety handling is the mixture of the fertilizer or industrial Ammonium-Nitrate and fuel oil, and it is also experienced that it shows insensible property before the initiation, but once it is initiated by the booster, it has equal explosive power of Ammonium Nitrate Explosives (ANE). There was many reports about AN-FO. On AN-FO mixing ratio, according to these experiments, prowdered AN-FO, 93.5 : 6.5 and prilled AN-FO 94 : 6, are the best ratios. Detonation, shock, and friction sensities are all more insensitive than any other explosives. Residual gas is not toxic, too. On initation and propagation of the detonation test, prilled AN-FO is more effective than powered AN-FO. AN-FO has the best explosion power at 7 days elapsed after it has mixed. While AN-FO was used at open pit in past years prior to other conditions, the author developed new improved explosives, Metallic AN-FO and Underwater explosive, based on the experiments of these fundmental characteristics by study on its usage utilizing AN-FO. Metallic AN-FO is the mixture of AN-FO and Al, Fe-Si powder, and Underwater explosive is made from usual explosive and AN-FO. The explanations about them are described in the other paper. In this study, it is confirmed that the blasting effects of utilizing AN-FO explosives are very good.

• Journal of Animal Science and Technology
• /
• v.49 no.6
• /
• pp.857-870
• /
• 2007

This study was conducted to investigate the relationship between the socio-demographic factors and the Korean consumers’ palatability evaluation and to collect the sensory information for development of prediction palatability model of Hanwoo beef. Ten cuts〔Abjin (short plate), Bosup (top sirloin), Cheggt (striploin), Dngsim (loin), Guri (chuck tender), Hongduke (eye of round), Moksim (chuck roll), Sulgit (bottom round), Udoon (top round), Yangi (brisket)〕 were separated from 10 Hanwoo bulls beef(～24 months old) and prepared with the same manner for 3 different cooking methods such as boiling, grilling and roasting. The cooked beef samples were served to 650 consumers recruited from Seoul, Joongbu, Honam and Youngnam locations and evaluated tenderness, juiciness, flavor and overall acceptability. The living location, age, gender, occupation, eating habit and cut were significantly related with the sensory properties when bull beef were cooked as boiled cooking(p<0.05). In grill cooking, only occupation, income and cut had the significant effect on the overall acceptability of Hanwoo bull beef(p<0.01). When bull beef were cooked as Korean traditional roast cooking, consumer’s sensory properties were significantly different by the living location, age, occupation, income, eating habit of consumers and cut(p<0.05). Also, results from the principal component analysis showed that palatability scores of Korean consumers were decided with different contribution scores of tenderness, juiciness, flavor and overall acceptability of cut depending on cooking methods. In conclusion, Korean consumers’ palatability for Hanwoo bull beef were related with the socio-demographic factors and the sensory results were different by cut and cooking methods.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.12
• /
• pp.990-995
• /
• 2012

A piezoelectric ultrasonic bone surgical instrument, usually used to remove the tartar out of teeth or to cut the dentine of the tooth, is a recently popular instrument for dental treatment due to its several merits such as small size, low-electric power and precision control of surgical operation. It has typically two parts of a tip and vibration system which is also composed of head, piezoelectric elements and tail-mass. In order to improve the performance of the instrument, it is important to standardize the size of the vibration system without tip for high performance. In this study, a Finite Element Analysis (FEA) was utilized to optimize the structure of ultrasonic instrument in vibration system. Consequently, this study revealed that influence of several tips on property were minimized and it showed good property at the frequency range of 22~32 kHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.10 s.101
• /
• pp.1028-1035
• /
• 2005

OFDM system has high PAPR(Peak-to-Average-Power Ratio) problem. In this paper, we present a low complexity phase weighting method to reduce the computational quantity so that we can cut down the processing time of SPW method. Proposed method is derived from the DFT property of periodical sequences by which PAPR can be reduced efficiently. The simulation results show the same PAPR reduction efficiency of proposed method in comparison with conventional methods. It can reduce 2.15 dB of PAPR with two phase factors and 3.95 dB of PAPR with four phase factors. The computation analysis shows significant improvement in the low complexity phase weighting method.

• Journal of the Korean Home Economics Association
• /
• v.44 no.10
• /
• pp.57-66
• /
• 2006

The purpose of this study was to evaluate the relationship between the tactile sensation and mechanical properties of towel. Six kinds of towels with different surface structure and fiber composition were used for this study. To evaluate the tactility of towel, 36 adjectives were collected and then 11 adjectives were selected. The subjective evaluation was examined by one to one comparative method and by blind test for estimating the only the sense of touch of the towels. Kawabata's Evaluation system for fabrics was used to measure the mechanical properties which are tensile, bending, shear, compression, surface, weight, and thickness of six towels. The results are as follows; First, surface structure of the towels had an effect on estimation the sense of touch. Pile surface was evaluated thicker, compacter, more cushiony, and more elastic. Waffle surface was evaluated knottier and rougher, and microfiber suede surface was evaluated softer and denser. Second, the highest value of the mechanical properties measured were G, 2HG, B, and SMD of 100% cotton 100% pile, WC, T, and W of elban loop pile, WT, 2HB, and LC of 100% cotton cut pile, RT and MIU of microfiber suede, and RC of microfiber waffle. Third, the 11 adjectives were correlated with more than one mechanical property. 'Knotty' and 'rough' were correlated with MMD and SMD, 'soft' were correlated with B, 2HB, MMD, and SMD. 'Thick', 'heavy', 'compact', and 'elastic' were correlated with WC, T, and W, 'cushiony' was correlated with WC. 'Stiff' was correlated with B and 2HB, 'dry out' was correlated with RT, WC, MIU, and T. 'Dense' was correlated with RT and SMD.

• Korean Journal of Optics and Photonics
• /
• v.16 no.6
• /
• pp.494-499
• /
• 2005

We have demonstrated a fiber short-wavelength filter with a good cut-off property using dissimilar dispersive properties between? a thermally expanded cored fiber and an external medium. Side-polishing is applied to coupling between the fiber and the external medium. The experimental results revealed that the bend edge wavelength can be adjusted by controlling the degree of core expansion. Futhermore, the sharpness of wavelength response? was significantly? improved by employing expanded core fiber instead of a conventional single mode fiber. Tuning range of the band edge wavelength exceeded 400 m based on thermo-optic effect of the external medium.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.4
• /
• pp.255-259
• /
• 2008

This study was conducted to investigate the effect of ridge height (10 cm, 20 cm, 30 cm, and 40 cm) on the soil physical property, the growth and flowering characteristics of Gypsophila paniculata (cv 'Bristol Fairy') in the subalpine area. As ridge height got higher, the daily soil temperature, the soil moisture content, soil hardness, bulk density, and solid phase ratio were decreased, but porosity ratio was a little increased. In summer and autumn cultivation the blooming of ridge height 30 cm and 40 cm was slightly delayed, but their root activity, cut flower width, and yield were better than those of 10 to 20 cm ridges. And the mortality ratio of plants, rosette formation rate, and nonpaniculata inflorescence rate became lower.