• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.4 no.2
• /
• pp.74-83
• /
• 2001

The purpose of this study was investigate to the influence of forest roads characteristics and environment factors on the soil erosion, stability and vegetation survival of cut slope in forest roads. The results obtained could be summarized as follows; 1. The correlated factors between slope erosion and variables in cut slope were altitude, convex, degree of slope, length of slope and soil depth. In the stepwise regression analysis, length of slope and soil hardness was a high significant and its regression equation was given by -89.6136 + 15.0667X14 + 16.6713X15($R^2$ = 0.6712). 2. The main factors influencing the stability of cut slope were significant in order of coverage, middle, convex, length of slope and north, and its discriminant equation was given by -1.019 + 0.064X22 - 0.808X8 - 0.622X24 + 0.742X11 - 0.172X14 - 0.545X6 ($R^2$ = 0.793). 3. The centroids value of discriminant function in the stability and unstability estimated to 1.244 and -1.348, respectively. The boundary value between two groups related to slope stability was -0.1038. The prediction rate of discriminant function for stability evaluation of was as high as 91.3%. 4. The dominant species of invasion vegetation on the cut slope consist with Carex humilis, Agropyron tsukushiense var. transiens, Calamagrostis arundinacea, Miscanthus sinensis var. purpurascens, and Ixeris dentata in survey area. The rate of vegetation invasion more increased by time passed. 5. The life form of invasion vegetation in cut slop showed to $H-D_1-R_{2,3}-e$ type of the hemicryptophyte of dormancy form, dissem inated widely by wind and water of dissminule type, moderate extent and narrowest extent of radicoid type, erect form of growth form. 6. The correlated factors between forest enviroment and coverage appeared north, passage years and middle position of slope at 5% level. The forest environment factors influencing the invasion plants in survey area were shown in order to altitude, passage years, rock(none), forest type(mixed) and stone amount. The regression equation was given by 17.5228 - 0.0911X3 + 3.6189X28 15.8493X22 19.8544X25 + 0.3558X26 ($R^2$ = 0.4026).

• Journal of Applied Biological Chemistry
• /
• v.61 no.1
• /
• pp.25-31
• /
• 2018

This study investigated the effect of different $O_2$ transmission rate (OTR) of films on surface temperature, weight loss, pH, $O_2$, $CO_2$ and sensory characteristics, microbial quality, total phenolic contents and 1,1-diphenyl-2-picryl hydrazyl radical scavenging activity of fresh-cut lettuce during storage at $10^{\circ}C$ for 7 days. $80{\pm}5g$ of fresh-cut lettuce were packaged with oriented polypropylene films respectively. The OTR of packaging materials was 5,000, 8,000 and $10,000cc/m^2{\cdot}day{\cdot}atm$. Quality characteristics showed significant differences during storage. The surface temperature was averaged 13 and lower in higher OTR of films. The weight loss of lettuce ranged from 2.8 to 5.4% and the highest loss showed in $5,000cc/m^2{\cdot}day{\cdot}atm$ of film. pH was increased during storage and the highest pH was found in $5,000cc/m^2{\cdot}day{\cdot}atm$. The $O_2$ content in the packaging was decreased with increasing $CO_2$ content during storage. The lowest $CO_2$ was found in $10,000cc/m^2{\cdot}day{\cdot}atm$. As OTR was decreased, antioxidant profile of lettuce was decreased. Total aerobic bacteria showed from 5.48 to 6.59 log CFU/g. From the result of the overall sensory test, the marketability of fresh-cut lettuce stored at $10^{\circ}C$ seemed to be maintained effectively over 5 days.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.4
• /
• pp.130-137
• /
• 1997

The demand for wire-cut EDM is increasing rapidly in the die and tool making industry. In this study machining characteristics such as machining rate, surface roughness, hand drum form and hardness of machined material are investigated experimentally under the conditions varing pulse on time, pulse off time, peak voltage, wire tension after fixing other conditions in SKD 11 and brass and brass workpiece. It was found that various operating conditions had significant influences on machining characteristics. But the hardness of workpiece was uneffected by operating conditions. Also it was obtained experimentally that brass workpeice had better machinability than SKD 11 one.dition according to the current(Ip) in an electric spark machine : 1) Electrode is utilized Cu and Graphite. 2) Work piece is used the material of carbon steel. The condition of experiment is : 1) Current is varied 0.7(A) to 50(A) and the time of electric discharging to work piece in each time is 30(min) to 60(min). 2) After the upper side of work piece was measured in radius(5$\mu$m) of stylus analyzed the surface roughness to ade the table and graph of Rmax by yielding data. 3) Electro wear ratio is : \circled1Cooper was measured ex-machining and post-machining by the electronic balance. \circled2The ex-machining of graphite measured by it, the post-machining was found the data from volume $\times$specific gravity and analyzed to made its table and graph on ground the data. 4) In order to keep the accuracy of voltage affected to the work piece was equipped with the A.V. R and the memory scope was sticked to the electric spark machine. 5) In order to preserve the precision of current, to get rid of the noise occured by internal resistance of electric spark machine and to force injecting for the discharge fluid , it made the fixed table for a work piece to minimize the work error by means of one's failure during the electric discharging.

• Journal of Bio-Environment Control
• /
• v.13 no.4
• /
• pp.266-270
• /
• 2004

A rose factory type is a system that enables year-round, planned and mass production of high quality cut-rose. Conversion of a conventional system to a rose factory is essential to increase cut-rose export. Controlling root Bone in culled rose production factory is very important for economic and efficient production of rose. This study was conducted to determine optimum root zone temperature of nutrient solution in single-stemmed rose production system. The optimum temperature of the nutrient solution for growth, photosynthetic and transpiration rates for 'Red Velvet' was $15\~20^{\circ}C$. Whereas the optimum temperature for 'Vital' was $10\~15^{\circ}C$. However, growth was almost sloped at $30^{\circ}C$, resulting in concluding the adaptation of 'Vital' to high temperature was poor as compared with 'Red Velvet'.

• Korean journal of applied entomology
• /
• v.4
• /
• pp.7-10
• /
• 1965

In an experiment to evaluate the various aspects of symptom of witches' broom of jujube tree with two different kinds of scions, taken from diseased plant and stem- grafted upon sound stocks-one cut before wintering(stored in cellar), the other after wintering, it was observed that the disease rate of those cut before wintering(Nov.) was $\98\%$ whereas those cut after wintering(March) showed much lower rate, $3\%$ initially and gradually increased up to $39\%$. In another experiment of diseased bud grafted into healthy seedling, the finding made in the following year was that 14 stocks(only one of which salt union by callusing) were infected out of the given 23- in the initial stage only 4, yet gradually increased to the number of 14. The shoots from the ground portion of the diseased stock were in general more quickly subjected to the disease than the others. Under natural condition, the diseased trees develop at first seemingly the same leaves as healthy ones; it is not until the branches and loaves grow to a considerable degree that the symptom appears. Once appearing, tile disease grows and the symptom continues to appear as late as in Sept. and early Oct., causing tile plant to develop the extraordinary branches and leaves of extremely reduced size, the typical symptom of witches' broom. Such phenomenon can be observed in the experiments of the foregoing paragraphs. And the suckers and roots of diseased plant are bound to be infected, it was found out with no exception. Viewing from the results of the above experiments and observation, it is believed that the low temperature during winter causes the virus in the above-ground portion of diseased plant to diminish or inactivated, and subsequently the virus in the roots moves up or multiply in the sprouting season.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.1
• /
• pp.99-106
• /
• 2013

DME (Di-Methyl Ether) is synthetic product that is produced through dehydration of methanol or a direct synthesis from syngas. And it is able to save fossil fuel and reduce pollutants of emission such as PM and $CO_2$. In spite of its advantages it is difficult to design DME fuelled engine system because DME fuel may cause to severely generate cavitation and corrosion in fuel delivery system due to physical properties of DME. Therefore, in this study three-dimensional internal flow characteristics with consideration of cavitation were predicted in the DME injector using diesel and DME fuel. Moving grid technique was employed to describe needle motion and 1-D hydraulic simulation of injector was also simulated to obtain transient needle motion profiles. The results of simulation show that cavitations was generated at the inlet of nozzle near high velocity region both diesel and DME. And mass flow rate of DME is reduced by 4.73% compared to that of diesel at maximum valve lift because cavitation region of DME is much more larger. To increase flow rate of DME injector, internal flow simulation has been conducted to investigate the nozzle hole inner R-cut effect. The flow rates of diesel and DME increase as R-cut increases, and flow coefficient of DME fuel injector was increased by 6.3% on average compared with diesel fuelled injector. Finally, optimum shape of DME injector nozzle is suggested through the comparison of flow coefficient with variation of nozzle hole inner R-cut.

• Journal of Korea Water Resources Association
• /
• v.49 no.9
• /
• pp.741-748
• /
• 2016

Laboratory scale model was constructed for open-cut riverbed infiltration experiment and four kinds of media were selected, medium sand, sand, volcanic rock, and gravel, for the experiment. Hydraulic conductivity for each medium and flow rate from the collecting pipe with functional screen were estimated from the experiment. Modified hydraulic conductivity scenarios considering turbid water (30~50 NTU) were applied in Visual MODFLOW modeling to analyze the effects of turbid water on the flow rate. Twenty-two scenarios were generated considering prticles in turbid water and applied to each medium cases in MODFLOW modeling. The minimum error was occurred when the gravel medium had 20% less hydraulic conductivities for the third layer-depth from the top and clay particles in turbid water might play a role in adsorption process to the surface of volcanic rock (2~5 mm). For medium sand case the error was also quite small when the mediumhas 5% less hydraulic conductivities for the second layer-depth from the top.

• Journal of Applied Reliability
• /
• v.15 no.4
• /
• pp.270-275
• /
• 2015

Purpose : UHMWPE (Ultra-high-molecular-weight-polyethylene) is one of the most widely used material in knife protection clothes because of high strength, elasticity, and light weight. The purpose of this study is to develop the accelerated life test method and predict the lifetime for the knife protection fabric composed by UHMWPE. Methods : In this study, degradation characteristics of UHMWPE fibers and knife protection fabric for cut resistance were evaluated under the hydrolysis and photo-degradation conditions. It was found out that the degradation rate of retained tensile strength was more significant in the photo-degradation than hydrolysis. Therefore, the failure time was determined as the time that the retained tensile strength in photo-degradation is less than 50%. Considering an acceleration factor for irradiance and exposure time, the lifetime was predicted from the calculated failure time. Results : As a result of the accelerated life test, the $B_{10}$ lifetime of knife protection fabric composed by UHMWPE fibers is estimated as 2.8 years for a 90% statistical confidence level. Conclusion: Since the lifetime is predicted by the view-point of radiant exposure in this study, there is a possibility that the estimated lifetime may differ from the actual lifetime. However, it is considered as an useful methodology to estimate the long-term lifetime of knife protection fabrics.

• Horticultural Science & Technology
• /
• v.17 no.4
• /
• pp.481-484
• /
• 1999

This experiment was conducted to examine the effects of chitosan and sucrose on the vase life of cut rose (Rosa hybrida L. cv. Cardinal). Addition of 5 mg/L chitosan and 3% sucrose to the holding solution prolonged the vase life for 3 days as compared to the control, and improved quality of cut rose in flower diameter and fresh weight. Development of bent-neck was delayed by supply of 2 mg/L or 5 mg/L chitosan and 3% sucrose about 2 or 3 days. When 3% sucrose was added to the holding solution, the rate of water absorption more slowly decreased compared to the other treatments.

• Journal of the Korean Society of Safety
• /
• v.24 no.2
• /
• pp.7-12
• /
• 2009

The machining process of ceramics can be characterized by cracking and brittle fracture. In the machining of ceramics, edge chipping and crack propagation are the principal reasons to cause surface integrity deterioration. Such phenomenon can cause not only poor dimensional and geometric accuracy, but also possible failure of the ceramic parts. Thus, traditional ceramics are very difficult-to-cut materials. Generally, ceramics are machined using conventional method such as grinding and polishing. However these processes are generally costly and have low MRR(material removal rate). To overcome such problems, in this paper, h-BN powder, which gives good cutting property, is added for the fabrication of machinable ceramics by volume of 10 and 15%. The purpose of this study is an analysis of endmill's rake angle for appropriate tools design and manufacturing for the machinable ceramics. In this study, Experimental works are executed to measure cutting force, surface roughness, tool fracture, on different axial rake angle of endmills. Cutting parameters, namely, feed, cutting speed and depth of cut are used to accomplish purpose of this paper. Required experiments are performed, and the results are investigated.