• Title/Summary/Keyword: Cut Rate

Search Result 1,148, Processing Time 0.039 seconds

Studies on the Seed Production of Festuca arundinacea Schreb I. Effect of nitrogen Fertilization level and method of its application on the seed production of level and method of its application on the seed production of Festuca arundinacea (톨 페스큐의 종자생산에 관한 연구. I. 질소비료의 시비수준 및 분시방법이 톨 페스큐 ( Festuca arundinacea S. ) 의 종자생산에 미치는 영향)

  • 박근제;권두종;이종열;양종성
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.5 no.2
    • /
    • pp.100-105
    • /
    • 1985
  • To find out the optimum level of nitrogen fertilization and better distribution of application time for seed production of Festuca arundianacea S. (var. Alta), this filed experiment was performed at Livestock Experiment Station in Suweon, during 1979 to 1981. The treatments used in this study were three nitrogen fertilizing levels (120, 180 and 240kg/ha) and four different methods of nitrogen distribution (i. single application of whole amount in early Spring, ii. 50 percent each in Autumn and early Spring, iii. 50 percent each in early Spring and at begin of heading stage and iv. 50 percent in Autumn and 25 percent in early Spring and at begin of heading stage respectively). The experiment was arranged as a split-plot design with 4 replications and performed at the experimental field of the Livestock Experiment Station in Suweon, during 1979 to 1981. The results obtained are summarized as follows: 1. Date of heading stage of Festuca arundinacea was about May 21 and that of flowering stage was June 1 to 3. The optimum stage for the seed harvesting of Festuca arundinacea (var. Alta) was June 25 about 22 to 23 days after full flowering stage. Average plant height was about 127cm and the panicle length, 24cm. 2. 1000 grain weight was 2.72g and the number of panicles were 85 to 107 per square meter. 3. The mean seed wield for two years was 678.8kg/ha with the average of whole treatments and 781.9kg/ha with the best treatment (50 percent in Autumn and 25 percent in early Spring and at begin of heading stage with 240kg/ha respectively). 4. The average germination rate of harvesting seeds was 87.0 percent and it was increasing trend according to frequent application of fertilizer. 5. The average DM yield of aftermath seed harvesting was 6155kg/ha with two cut, and it was the largest DM yield from the higher nitrogen level and also from the single application in early Spring.

  • PDF

Transformation of Bottle Gourd Rootstock (Lagenaria siceraria Standl.) using GFP gene (GFP유전자를 이용한 대목용 박 형질전환)

  • Lim, Mi-Young;Park, Sang-Mi;Kwon, Jung-Hee;Han, Sang-Lyul;Shin, Yoon-Sup;Han, Jeung-Sul;Harn, Chee-Hark
    • Journal of Plant Biotechnology
    • /
    • v.33 no.1
    • /
    • pp.33-37
    • /
    • 2006
  • Bottle gourd (Lagenaria siceraria Standl.) has been used as a rootstock for the watermelon cultivation because of better growth ability at low temperature and avoidance from contamination of the soil disease. Since the genetic source for the elite rootstock is limited in nature, the genetic engineering method is inevitable to develop new lines especially to obtain the functionally important or multi-disease resistant bottle gourd. Recently, our lab has set up a successful system to transform the bottle gourd. in order to monitor the transformation process, GFP gene is used. Cotyledons of the inbred line 9005, 9006 and G5 were used to induce the shoot under the selection media with MS + 30 g/L sucrose + 3.0 mg/L BAP + 100 mg/L kanamycin + 500 mg/L cefotaxime + 0.5 mg/L $AgNO_3$, pH 5.8. The shoot was developed from the cut side of the explants after 3 weeks on the selection media. The shoot was incubated in the rooting media with 1/2 MS + 30 g/L sucrose + 0.1 mg/L IAA + 50 mg/L kanamycin + 500 mg/L cefotaxime, pH 5.8 and moved to pot for acclimation. Although the shoot development rate was depended on the genotype, the G5 was the best line to be transformed. Monitoring GFP expression from the young shoot under microscope could make the selection much easier to distinguish the transformed shoot from the non-transformed shoots.

Studies on production of nuclear transplanted mouse embryos (핵이식 마우스 생산에 관한 연구)

  • Lee, Byeong-chun;Jo, Choong-ho;Hwang, Woo-suk
    • Korean Journal of Veterinary Research
    • /
    • v.33 no.1
    • /
    • pp.151-169
    • /
    • 1993
  • The present study was carried out to investigate the best condition for nuclear-cytoplasm fusion and in vitro culture of nuclear transplanted embryos and to investigate the production of nuclear transplanted offsprings. The nuclei from 2-, 4- and 8-cell mouse embryos were transferred into enucleated 2-cell embryos, and the reconstituted embryos were submitted to direct current(DC) pulses at output voltage of 1.0, 1.5 and 2.0 kV/cm for 100, 150 and $200{\mu}$ sec to induce cell fusion. 1. The culture of intact or zona cut 2-cell embryos in the medium supplemented with cytochalasin B($5{\mu}g/m{\ell}$) and colcemide($0.1{\mu}g/m{\ell}$)for 30 and 60 minutes did not affect the development to later stage. 2. The in vitro developmental rates of group A(a nucleus from one of the blastomeres was removed) and B(electrofusion of group A) were significantly lower than that of control group(p<0.01). 3. When nuclear transplanted embryos were submitted to electrofusion, the significantly higher fusion rates of 2-cell donor nuclei were achieved at the electric field strength of DC 1.5kV/cm for 100 and $150{\mu}$ sec, DC 2.0 kV/cm for $100{\sim}200{\mu}$ sec than DC 1.0 kV/cm for 100 and $150{\mu}$ sec(p<0.01). The significantly higher fusion rates of 4-cell donor nuclei were achieved at DC 2.0 kV/cm for 100 and $150{\mu}$ sec than DC 1.0kV/cm for $100{\sim}200{\mu}$ sec(p<0.01). These fusion rates in 8-cell donor nuclei were 88.7~99.3%. 4. The developmental potency to blastocyst in 2- and 4-cell donor nuclei was significantly higher in DC 1.0 and 2.0 kV/cm for $100{\sim}200{\mu}$ sec treated group and DC 2.0 kV/cm for 150 and $200{\mu}$ sec treated group (p<0.01). The developmental potency to blastocyst in 8-cell donor nuclei was significantly higher in DC 2.0 kV/cm for $100{\mu}$ sec treated group than in DC 1.0 kV/cm for $100{\mu}$ sec treated group and DC 2.0 kV/cm for 150 and $200{\mu}$ sec treated group(p<001). 5. The developmental potency to blastocyst after nuclear transplantation was significantly higher in 2-cell donor nuclei than in 8-cell donor nuclei(p<0.01). 6. The success rate of nuclear injection into enucleated 2-cell embryos was significantly higher in 2-cell donor nuclei than in 4- or 8-cell donor nuclei(p<0.01). 7. The culture time taken for the nuclear transplanted 2-cell embryos to blastocyst stage was significantly longer in 2-cell donor nuclei than in 8-cell donor nuclei(p<0.01). 8. There was no significant difference in the developmental potency of nuclear transplanted embryos within the concentration of EGF at 0 to 15 ng per $m{\ell}$ of BMOC-3 solution. 9. The production rates of offspring after transfer of nuclear transplanted embryos to recipient mouse were significantly higher in 2-cell donor nuclei than in 8-cell donor nuclei(p<0.01).

  • PDF

The Effects of Hot Water Extraction of Wood Meal and the Addition of CaCl2 on Bending Strength and Swelling Ratio of Wood-Cement Board (목질(木質)의 열수추출(熱水抽出) 및 CaCl2 첨가(添加)가 목질(木質)-세멘트 보드의 휨강도(强度) 및 팽윤율(膨潤率)에 미치는 영향(影響))

  • Ahn, Won-Yung;Shin, Dong-So;Choi, Don-Ha
    • Journal of the Korean Wood Science and Technology
    • /
    • v.13 no.3
    • /
    • pp.49-53
    • /
    • 1985
  • The effects of pre-treatments, the hot water extraction of wood meal and the addition of chemical ($CaCl_2$) to wood-cement water system on the properties of wood-cement composite such as modulus of rupture (MOR), modulus of elasticity (MOE), water sorption ratio and swelling ratio of resulting boards were studied in this experiment. The wood meals through 0.83mm(20 mesh) and retained on 0.42mm(35 mesh) screen were prepared from Pinus densiflora S. at Z. and Larix leptolepsis G. For hot water extraction, 500 grams of wood meal for each species were heated to boiling with 1,500ml of distilled water in 2-liter beaker for 6 hours. Every 2 hours, the wood meals were washed with boiling distil1ed water and reheated to boiling again. After 6 hours boiling, the boiled wood particles were collected by pouring this particles on 200 mesh screen. The collected particles then washed twice with hot distilled water and dried for 24 hours in an oven at $109{\pm}20^{\circ}C$. A mixture of 663.4 grams of cement with 331.7 grams of wood meal based on oven-dry weight were dry-mixed in a plastic vessel. The mixture was kneaded with 497.6ml of distilled water in the ratio of 1.5ml of water to a gram of wood meal. To add calcium chloride to the mixture as an accelerator, $CaCl_2$ 4% solution by weight per volume, was added to pine-or larch-cement board in the ratio of 3% to cement weight. To set wood-cement board, this mixture was clamped at 30cm ${\times}$ 30cm, in thickness of 1.5cm for 3 days at room temperature, declamped and then placed at open condition for 17 days. The target density was 1.0. The four specimens sized to 5cm in width and 28cm in length were used for MOR and MOE test for each treatment. After MOR test, the tested specimens were cut to the size of 5cm ${\times}$ 5cm for water sorption and swelling test. The twenty specimens used to measure the water sorption ratio (soaking 24 hours) and ten of these were used for swelling ratio measurement The results obtained were as follows: 1) Larch was not suitable for wood-cement boards because larch-cement board developed no strength, but pine showed 97.9kg/$cm^2$ by hot water extraction. 2) To increase MOR, hot water extraction was more effective than the addition of $CaCl_2$ in pine and larch because the $CaCl_2$ addition was seemed to speed up the ratio of cement hydration without reacting with the wood substances. 3) The water sorption ratio was lowered by the addition of $CaCl_2$ to wood-cement system because the chemical additive accelerated the rate of cement hydration. 4) In pine-cement board, the swelling ratio from 0.37 to 0.42 percent was observed in length and the swelling ratio from 0.88 to 2.0 percent in thickness. As a rule, the swelling ratio of wood-cement board was very low and the swelling ratio in thickness was higher than in length.

  • PDF

Future Development of Genetics and the Broiler (BROILER 육종기술의 전망)

  • 오봉국
    • Korean Journal of Poultry Science
    • /
    • v.8 no.1
    • /
    • pp.1-5
    • /
    • 1981
  • In trying to predict the effect of genetics on the broiler in the year 2000, this is a relatively short period of time as far as broiler genetics in concerned. Modern broiler genetics started around 1945 and tremendous gains when made in past 35 years. Futher improvements on broiler will depend on the evolution and revolution: 1. Evolution: (1) Growth rate has been made 4-5% per year. (2) Feed conversion has improved approximately 1% per year. (3) Abdominal fat is becoming a major complaint in broiler. (4) Because of the changing life-style, broiler meat sales in the future will be more and more in cut-up form. (5) Breeding for stress resistance and selection for docile temperament can be important in order to funker improve fled efficiency. (6) In female parent stock, reproduction characteristics are in many can negatively correlated with the desired broiler traits. (7) Egg production and hatchability in moot commercial parent nod m at a fairly high level. (8) In male parent stock, the heavier and mon super-meat-type male lines are desired to Product better broilers. 2. Revolution: Trying to forecast revolutionary change in broiler genetics is highly speculative, as sudden change are aften unpredictable. (1) Species hybridization, such as a turkey-chicken cross (2) Biochemical tools, such as blood typing. (3) Mutation breeding by radiation or chemical mutagentia. (4) Broiler breeding would be to change the phenotypic appearance by single gene, such as naked, wingless. (5) Changes in production techniques. such as growing in cage or growing in filtered air positive pressure houses.

  • PDF

An experimental study on prednisolone-induced interstitial pneumonia caused by Pneumocystis carinii (프레드니솔론 투여에 의한 조폐포자충(Pneumocystis carinii)성 간질성 폐염에 대한 실험적 연구)

  • 신대환;이영하;나영은
    • Parasites, Hosts and Diseases
    • /
    • v.27 no.2
    • /
    • pp.101-108
    • /
    • 1989
  • This study was performed to observe the role of Pneumocystis carinii as an etiologic agent of interstitial pneumonia in immunocompromised hosts. Total 90 male Sprague-Dawley rats, approxi. mately 150-180 g, were used. Fifteen of them were used as control group and remaining 75 (5 groups) were as immunosuppression groups; group 1 received prednisolone (25 mg/kg twice weekly) only; group 2 Prednisolone and tetracycline (75 mk/kg/day) ; group 3 Prednisolone, tetracycline and trimethoprim-sulfamethoxasole (50~250 mg/kg/day) : group 4 prednisolone and trimethoprim-sulfamethoxasole; and group 5 prednisolone and griseofulvin (300 mg/kg/day) until death. The survival days of each group rat were calculated, and upon death their lungs were removed immediately and then stamp smears were prepared and stained by Giemsa or toluidine blue O. For histopathologic observation, lungs were fixed in 10% formalin, cut into sections and stained with Gomori's methenamine silvei, hematoxylin-rosin, and Brovkn & Brenn stain. The results obtained were as follows: 1. The mean survival time of each group rat was 19.3$\pm$5.2 days (group 1), 41.1$\pm$14.0 days (group 2), 50.5$\pm$18.4 days (group 3), 43.0$\pm$22.9 days (group 4) or 21.8$\pm$5.1 days (group 5). Significant differences were noted between group 1 and group 2(p<0.01), group 1 and group 3 (p<0.01), and group 1 and group 4 (p<0.01), which represented bacterial infections were most fatal in immunocompromised rats. Group 5 revealed no difference in the survival day from group 1, while significant differences were noted between group 2 and group 5(P<0.01), group 3 and group 5(p<0.01), and group 4 and group 5(p<0, 01), which represented little importance of fungal infection as the cause of death of the rats. 2. The first fatality due to p. carinii pneumonia occurred 17 days after the beginning of the immunosuppression. The occurrence rate of P. carinii pneumonia in the decreasing order was 92.9% (group 3), 80.0% (group 2 and group 5), 78.6% (group 4) and 33.3% (group 1). With regard to the pathological stage of P. carinii pneumonia, the stage 1 was 11.3%, the stage 2, 28.3%, and the stage 3, 60.4%. 3. Viewing from the duration of immunosuppression, bacterial pneumonia chieay appeared in 1 month, mixed infections (P. carinii and bacteria, or p. carinii and fungi) in 1~2 months, and pure P. carinii pneumonia after 2 months. The present study revealed that P. carinii pneumonia was the most important cause of death of immunocompromised rats later than 1 month after the start of immunosuppression.

  • PDF

Predictors of Clinically Non Specific Bacterial Infection in Febrile Children Less than 3 Years of Age : WBC, ESR and CRP (비특이적 소견을 보이는 3세 이하의 발열 환아에서 세균성 감염의 예측 인자 : 백혈구 수, 적혈구 침강 속도, C-반응성 단백질)

  • Nho, Jeong A;Rho, Young Il;Yang, Eun Seuk;Kim, Eun Young;Park, Yeong Bong;Moon, Kyung Rye
    • Clinical and Experimental Pediatrics
    • /
    • v.46 no.8
    • /
    • pp.758-762
    • /
    • 2003
  • Purpose : Our examination was designed to determine the diagnostic properties of the cutoff point for the prediction of bacteremia in febrile children less than 3 years of age. Cutoff point is the value that simultaneously maximizes both sensitivity and specificity. Methods : We conducted a retrospective study of febrile children, less than 3 years of age, who clinically have no identifiable source of fever. Peripheral blood leukocyte count(WBC), absolute neutrophil count(ANC), erythrocyte sedimentation rate(ESR) and C-reactive protein(CRP) were measured at the same time. All patients received blood culture, urine culture and/or CSF culture. Bacterial infection was defined as single pathogen isolated from the CSF or blood or a urinary tract infection (UTI). Patients were dichotomized into two groups : those with bacterial infection and no bacterial infection. We analyzed the characteristics of the children in the two groups. Results : Seventy-one patients(44 males; 27 females) were enrolled in the study. Twenty patients (28%) had a serious bacterial infection(twelve urinary tract infection, five bacteremia, three meningitis) and fifty-one(72%) had no serious bacterial infection. WBC, ESR and CRP were significantly different between the two groups(P<0.05). The cutoff point of WBC, ESR and CRP were $20,000/mm^3$, 30 mm/hr and 3.0 mg/dL, respectively. The sensitivity and specificity of each cutoff point were WBC(75%, 75%), ESR(79%, 68%) and CRP(83%, 77%), respectively. Conclusion : These data show the ability of predictors to identify febrile children less than 3 years of age with bacterial infection. Febrile children who reach the cutoff point must be treated intensively and those who do not reach the cutoff point can be carefully managed without administering antimicrobial agents.

Cooling Time Determination of Spent Nuclear Fuel by Detection of Activity Ratio $^{l44}Ce /^{l37}Cs$ (방사능비 $^{l44}Ce /^{l37}Cs$ 검출에 의한 사용후핵연료 냉각기간 결정)

  • Lee, Young-Gil;Eom, Sung-Ho;Ro, Seung-Gy
    • Nuclear Engineering and Technology
    • /
    • v.25 no.2
    • /
    • pp.237-247
    • /
    • 1993
  • Activity ratio of two radioactive primary fission products which had sufficiently different half-lives was expressed as functions of cooling time and irradiation histories in which average burnup, irradiation time, cycle interval time and the dominant fissile material of the spent fuel were included. The gamma-ray spectra of 36 samples from 6 spent PWR fuel assemblies irradiated in Kori unit-1 reactor were obtained by a spectrometric system equipped with a high purity germanium gamma-ray detector. Activity ratio $^{l44}$Ce $^{l37}$Cs, analyzed from each spectrum, was used for the calculation of cooling time. The results show that the radioactive fission products $^{l44}$Ce and $^{l37}$Cs are considered as useful monitors for cooling time determination because the estimated cooling time by detection of activity ratio $^{l44}$Ce $^{l37}$Cs agreed well with the operator declared cooling time within relative difference of $\pm$5 % despite the low counting rate of the gamma-ray of $^{l44}$Ce (about 10$^{-3}$ count per second). For the samples with several different irradiation histories, the determined cooling time by modeled irradiation history showed good agreement with that by known irradiation history within time difference of $\pm$0.5 year. From this result, it would be expected to be possible to estimate reliably the cooling time of spent nuclear fuel without the exact information about irradiation history. The feasibility study on identification of and/or sorting out spent nuclear fuel by applying the technique for cooling time determination was also performed and the result shows that the detection of activity ratio $^{l44}$Ce $^{l37}$Cs by gamma-ray spectrometry would be usefully applicable to certify spent nuclear fuel for the purpose of safeguards and management in a facility in which the samples dismantled or cut from spent fuel assemblies are treated, such as the post irradiation examination facility.mination facility.

  • PDF

The Effect of Nutrient Solution Concentration on Growth of Potato Plantlet in Microponic System (Microponic system에서 배양액의 농도변화가 감자 소식물체 생육에 미치는 영향)

  • Ko, Sun A;Choi, Ki Young;Lee, Yong-Beom
    • Journal of Bio-Environment Control
    • /
    • v.23 no.2
    • /
    • pp.144-147
    • /
    • 2014
  • It was intended to closely examine an effect that a change in the concentration of culture medium had on the potato(Solanum tuberosum L.) plantlet growth in the microponic system so as to mass-produce the virus-free plant of new variety 'Saebong' for potato processing. The adjusted concentration of potato culture medium was 0.2, 0.6, 1.0, 1.4, 1.8, and $14.0dS{\cdot}m^{-1}$. And potato seedling was cut into pieces of 1.5 cm in length, which included 2 growth points and leaves. And each was explanted in glass vial of 50 mL. And experiments were carried out twice for 18 days or 21days. Culture medium of 2ml was put in the container respectively. And 1 mL was added after 10 days. And in terms of cultivation environment, the experiment was carried out at the day length of 16 hours at the temperature of $23{\pm}1^{\circ}C$ under the white LED light of $40{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. The concentration of culture medium in the experiment I was EC 0.2, 1.0, $14dS{\cdot}m^{-1}$ and was adjusted to 0.6, 1.0, 1.4, $1.8dS{\cdot}m^{-1}$ in the experiment II. The results showed that the survival rate of plantlet was 90% at $0.2dS^2m^{-1}$, 100% at $0.6dS^2m^{-1}$, 100% at $1.0dS^2m^{-1}$. 0% at $1.4dS{\cdot}m^{-1}$, 0% at $1.8dS{\cdot}m^{-1}$. and 0% at $14.0dS{\cdot}m^{-1}$ after 7 days. With regard to the explanted potato seedling, in case of the treatment where the electrical conductivity of culture medium was adjusted to $1.0dS{\cdot}m^{-1}$, root developed 2 days after transplantation. And the plantlet vigorously grew into strong plant that had 7 leaves, length of 5cm, and fresh weight of 0.5 g after 18 days. In case of the treatment where the concentration of culture medium was adjusted to $0.6dS{\cdot}m^{-1}$, the root plantlets developed 4 days after transplantation. And those grew into plant that had 7 leaves and fresh weight of 0.2 g after 21 days. Therefore, we found that it is effective to control potato culture medium by adjusting its electrical conductivity to $0.6{\sim}1.0dS{\cdot}m^{-1}$ for the mass production of virus-free potato seedling in the microponic system.

Ecological Characteristics and Management Plan of Geumdangsil Pine Forest of Yecheon (예천 금당실 송림의 생태적 특성 및 관리방안)

  • Lee, Soo-Dong;Lee, Chan;Kim, Donwook;Kim, Jisuk
    • Korean Journal of Environment and Ecology
    • /
    • v.27 no.6
    • /
    • pp.718-732
    • /
    • 2013
  • The purpose of this study was to provide data for the basic research to found the effective conservation and management plan for the Geumdangsil Pine Forest of Yecheon designated as Natural Monument No. 469. Furthermore, this paper suggest efficient sustainable forest preservation and using. In order to achieve the sustainable forest preservation, this study was to analyse topography, land use, tree growth, soil environment, forest usage and forest management, etc. According to analysis the results, the site area is located in the flatlands where is from 130 to 140 m above sea level. The around forest was transformed into agricultural land. The 565 individuals of Pinus densiflora grows in the forest, whereas, 25 trees was cut down or died. There are signs of 25 stumps. The most of 565 trees' diameter at breast height(DBH) was centerized between 30 cm and 50 cm, moreover, the average life expectancy of trees were 85.4 years. The oldest age of tree was estimated to be 200 years. The Sample trees of rate of branch growth is from 4.3 cm to 5.1 cm per year. The middle branch which is more vigorous growth grow 24.2 cm for 3 years. Moreover, the result of soil physico-chemical properties analysis of 7 plots, 4 categories which is soil organic matter, total nitrogen, available phosphoric acid, specific electrical conductance was generally good, however, the 2 categories which is soil pH, exchangeable cation needed improvement. Currently, the site was not pressured by facilities and usage, however, there might be threaten by agriculture such as encroaching on forest. Therefore, there should establish comprehensive ecosystem management such as facility management, visitors management and operation management In this paper considered 4 fields that is ecosystem management, facility management, visitors management and operation management for sustainable management.