• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.202-202
• /
• 2011

Diagnostics of plasma density is a key factor for monitoring plasma processing. Various probes are invented to measure plasma density and cut-off probe is a one of the most promising diagnostics tool for measuring plasma density. However, at the low density or high pressure the cut-off probe cannot clearly resolve the cut-off peak. Several reasons make this problem: Cut-off likes peaks caused by cavity resonances and weaken transmission spectrum signal at high pressure. Recently, You et al., have researched mechanism of cut-off probe and we improve the cut-off reliability and sensitivity base on that research. Modified cut-off antenna is adapted and bias cut-off probe method is tried. These experiment results have good agreement with the previous study and show good measurement characteristics.

• 패션비즈니스
• /
• 제19권5호
• /
• pp.199-212
• /
• 2015

Environmentally-friendly whole-cut designs can minimize carbon dioxide emissions which are harmful to the earth, and reduce energy, labor force and time in cutting or sewing clothes. The design and way of wearing clothing will be investigated by classifying whole-cut clothing appearing in the history of costume and past traditional outfits such as Drapery, a Pancho, Tunic, or Loincloth. According to the results from the analysis of whole-cut methods applied in design, they were classified as follows: whole-cut, utilizing square-panels as is, pleats, smoking, lip band, origami, cutting way, and subtraction-cutting whole-cut design. The whole-cut design utilizing square panel as it is can minimize the waste of energy and material but can also maximize the possibility of circulation by recycling. In utilizing an all square panel, it broke away from the existing whole-cut in the western pattern, namely, the pattern of clothes clinging to the body, and was found to have new aesthetic value with a new approach. Due to the whole-cut method having a restriction in the use of dart and line cutting in its designing process, there were only designs that did not show the body line, such as designs clinging to the body. Therefore we developed a design similar to those that cling to the body by whole-cut, In addition, the work produced was with high efficiency and variability, which produces simple designs but can be worn in a variety of ways.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2017년도 추계학술논문요약집
• /
• pp.189-190
• /
• 2017

For the concept design of the device, a tool was made to test the simulated fuel rods and cutting force and the cutting force was measured. When 2-CUT and 3-CUT modules were used, the maximum force in 2-CUT at 12.5 mm/s speed change was $197.5kg_f$ and the maximum force at 3-CUT was $363.2kg_f$. The change of force in 2-CUT rapidly increases from about 1 second, and you can see that there are increase and decrease of the force change from about 5 seconds to 18 seconds, and it was rapidly decreased and the cut was made. The force change in 3-CUT has higher force at about 5 seconds later than 2-CUT at the speed of 12.5 mm/s, and you can see that it has the same tendency afterwards. If you search for the force at adequate speed from this cutting force test, 2-CUT module requires less slitting force than 3-CUT module, and the cutting time for 250 mm at 12.5 mm/s was 21 seconds, which can cut 4 m fuel rod in 5 minutes. But, there are cases of not completely slitting with 2-CUT module, so it is necessary to supplement this in the future through experiments.

• 대한산업공학회지
• /
• 제19권3호
• /
• pp.51-57
• /
• 1993

This paper develops 0($n^3$) algorithm to construct a cut-tree generated by Gomory-Hu algorithm. The algorithm only requires node sets defined by the minimal cut in each of the (n-1) maximal flow determinations. Merging computerized facility layout procedure that uses cut-tree concept to generate design skeletons with our algorithm requires less storage space than merging it with Gomory-Hu algorithm. Also, the cut-tree can easily be modified when the (n-1) minimal cut-sets are updated due to changes on arc capacities.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 사면안정학술발표회
• /
• pp.33-42
• /
• 2003

Since the cut slope has been big concern due to frequent failures, the government decided to include cut slopes in the“Act for Safety Control of Public Structures”. Based on the Act, the cut slope whose height is over 50m and length is over 200m should be inspected on the regular basis. According to the Act, KISTEC developed the objective evaluation method for the condition of cut slope. The evaluation method is divided into two categories: evaluation for damaged condition and evaluation for failure affecting factor. Based on the evaluation results, the cut slope is graded from A to E. In this study, the process to evaluate the cut slope condition and the evaluation criteria to divide the grade of cut slope are introduced.

• 원예과학기술지
• /
• 제33권3호
• /
• pp.383-389
• /
• 2015

Chitooligosaccharide (COS), as antioxidant, extensively applied to food and juice preservation. In the present study, influences of COS on vase life and ornamental value of cut roses were investigated. Results showed that vase life of cut roses treated by COS was longer 6.4 days than one of control and ornamental character of cut roses was improved effectively by COS. The increase of vase life and ornamental value were chiefly governed by that COS improved water absorption capacity of cut roses. Besides that, COS decreased the contents of superoxide anion and hydrogen peroxide and lowered the levels of malondialdehyde in turn during the senescence process of cut roses. That was because that COS not only enhanced activities of antioxidant enzymes glutathione reductase, but also improved reduced glutathione contents in petals of cut rose. Therefore, COS could be used in commercial preservatives to improve the longevity of cut roses.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.585-588
• /
• 2008

KICT has been carried out inventory research on the cut slopes of national roads. Inventory research results are basic data using cut slope management system. Inventory data are classified by general status, cut slope characteristics and inspector opinion. Inventory data are utilized to figure out dangerous slopes and decide survey ranking of detailed safety diagnostication. This paper drew the distribution area of dangerous cut slopes using inventory data in Chungcheongdo, and verified efficiency on distribution area of dangerous cut slopes by comparing occurrence frequency of real collapsed cut slopes.

• 대한임상검사과학회지
• /
• 제55권3호
• /
• pp.132-142
• /
• 2023

서울대학교병원 진단면역검사실에서 HLA 형별 검사를 위한 결과 산출하는 과정에서 HLA-DR 검사 시행 건수 총 611건 중 Lot No.20의 시약에서 빈번히 나타나는 위양성과 위음성으로 의심되는 특이 bead 들의 반응을 발견하게 되었다. 따라서 정확한 결과 산출과정을 모색하기 위하여 특이 bead들의 cut-off 수정을 하지 않은 검사결과 533건과 특이 bead의 cut-off 수정을 한 뒤 결과 산출을 한 78건의 사례들을 가지고 cut-off 수정을 야기시키는 요인을 여러 변수로서 규명하고자 하였다. 검체대상의 인구통계특성과 cut-off 수정 여부를 확인하기 위해 빈도분석, 검사실의 습도를 변수로 넣어 기술통계를 진행하였고, cut-off 수정 여부와 인구통계특성의 연관성을 확인하기 위하여 교차분석을 시행, cut-off 수정 여부에 따른 습도의 차이를 검증하기 위해 독립표본 t검증을 실시하였다. 마지막으로 습도수준에 따른 cut-off 수정비율의 관계를 검증하기 위해 로지스틱 회귀분석을 실시하였다. 결과적으로 검사실의 습도 수준이 증가함에 따라 cut-off 수정사례는 0.986배 감소하는 것으로 나타났다. 이는 습도가 낮아질수록 cut-off 수정률이 증가한다는 것을 의미한다. 따라서 검사실의 습도 또한 HLA typing 결과에 영향을 미치는 요인임을 시사한다.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 1998년도 가을 학술발표논문집 Vol.25 No.2 (2)
• /
• pp.411-413
• /
• 1998

Video영상을 의미있는 부분으로 나누는 Video segmentation을 위해서는 Video Cut의 검출이 필요하다. 본 논문에서는 Video Cut의 검출을 위하여 신경망을 이용하였으며, cut의 측정 방법으로 보색(complementary color)의 개념을 도입하였다. 이 방법을 이용하여, 여러개의 Video data로부터 학습을 한 뒤 새로운 Video에 대해서 테스트한 결과 좋은 성능을 보였다.

• 한국지반공학회논문집
• /
• 제17권6호
• /
• pp.245-255
• /
• 2001

기존 개탁식터널은 굴착경사와 관계없이 터널상부에는 되메움지반의 자중이 그리고, 터널벽체에는 정지토압이 작용하는 것으로 가정하여 설계되고 있다. 그러나 개착식터널에 실제 작용하는 토압은 개착규모에 따라 다르며 이에 따라 터널라이닝의 구조적거동 또한 다르게 나타난다. 본 연구에서는 수치해석적방법을 사용하여 굴착경사가 터널라이닝에 미치는 영향을 다음과 같이 조사하였다. 첫째로, 지반범용수치해석프로그램인 FLAC2D를 사용하여 개착공법으로 시공된 기존 터널의 변형거동을 모사할 수 있는 수치해석방법을 활용하여 현장의 계측결과와 비교하므로써 수치해석방법의 타당성을 검증하였고, 둘째로, 동일한 수치해석기법을 적용하여 굴착경사가 $30^{\circ}\;, 456{\circ},\; 60^{\circ},\; 75^{\circ}%인 개착식터널에 작용하는 토압 및 변위와 터널라이닝에 발생하는 단면력을 조사하였다. 수치해석에 사용된 개착식터널은 2차로 도로터널이며, 터널라이닝과 되메움지반 사이의 마찰력을 고려하기 위하여 접합면 요소를 사용하였다. 수치 해석결과, 되메움지반과 터널라이닝 및 굴착사면 사이의 마찰력에 의한 되메움지반 내부의 아칭현상으로 인하여 굴착 경사가 클수록 터널벽체에 상대적으로 작은 토압이 작용하였으며, 이에 따라 터널라이닝의 변형, 모멘트, 전단력이 증가하였음을 알 수 있었다.