• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.611-616
• /
• 2003

The application of the tilting train is one of the most efficient ways to increase curving speed of train on existing tracks or on mountain railway lines with sharp curves. It can increase the running speed and ensure the passenger comfort and safety at the same time. Therefore, the development of tilting train has been paid high attention by many countries in the world. Tilting trains have been operated successfully in many countries such as Italy, Spain, Germany, Sweden, England and so on. The tilting trains possess broad prospects in raising speeds. The distributed EMU tilting train set will be developed according to the Korea railway conditions and will be operated on the Honam line, Janghang line and Jungang line. Because there is high percentage of curves on these lines. these lines are suited to operating tilting trains to raising speed and saving passenger traveling time. In order. to improve the curving performance of the tilling train. the active-control algorithm is utilized for the tilting bogie.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 춘계학술대회 논문집
• /
• pp.431-432
• /
• 2010

• 한국정밀공학회지
• /
• 제28권5호
• /
• pp.559-564
• /
• 2011

For the safety of railway, it should be evaluated for the running safety by measuring the derailment coefficient. Although railway has run the fixed and maintained rail, some of railway is derailed. This report shows the results that performed the static load test, main line running test on the basis of the derailment theory and experience. It is executed main line test into more than 90km/h for estimating the curving performance and running safety of depressed center flat car of 3-axle bogie. As the test results, could confirm the curving performance and running safety of depressed center fiat car of 3-axle bogie from the results of the wheel unloading, lateral force, derailment coefficient etc. Derailment coefficient was less than 0.6, and lateral force allowance limit and wheel load reduction ratio were enough safe.

• 한국철도학회논문집
• /
• 제2권2호
• /
• pp.6-12
• /
• 1999

In this study, the most important suspension characteristics of railway vehicle, such as primary and secondary stiffness, are optimized to maximize ride qualify. Critical speed, secondary suspension stroke oil tangent track and derailment coefficient on the maximum curvature, are selected as the performance constraints. Piecewise linear curving model is used to evaluate derailment coefficient where it is assumed that wheel/rail contacts occurs at tread or at idealized flange. The combined design procedure is used to optimize above design variables at the same time.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.69-72
• /
• 2007

In this paper, we describe the analysis of interior noise for tilting train that is being developed in Korea. Tilting train is made of composite material to reduce the car body's weight and attached a self-steering system on bogie to improve curving performance. However, the acoustic performance (Transmission Loss) of such material is worse than the materials of conventional train, such as aluminum, steel and so on. Therefore, we measure the transmission loss of side wall / floor of tiling train and predict the interior noise for tilting train using its measuring results

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.854-859
• /
• 2008

In a railway vehicle, contact between wheel and rail is a peculiar characteristic and variations of wheel and rail profile influence on the dynamic characteristics of railway vehicle. Thus the variations of the wheel and rail profile are very important in railway dynamics. Recently a research relating to active steering to improve the curving performance of vehicle is progressing actively at home and abroad. In this field, a pre-study for the wheel/rail contact geometry is needed and especially the variation of the wheel/rail contact geometry with wheel wear is the key design parameter to develop the controller of the active steering bogie. In this paper, we have experimentally studied to analyze the variation of the wheel/rail contact geometry with wheel wear as a pre-study to develop the active steering bogie for electric multiple unit (EMU). For this, we have made an experiment with EMU operating in curving area. We have measured the wear profiles of the wheel of the test vehicle and analyzed the wheel/rail contact geometry with a mileage of the test vehicle. In experiment with test vehicle, we have got the useful data to design the steering controller of the wheelset.

• 한국통신학회논문지
• /
• 제37권2A호
• /
• pp.128-134
• /
• 2012

본 논문에서는 커브형 집적영상 시스템에서 부분적으로 가려진 먼 거리 3차원 물체의 인식 향상을 위한 새로운 direct pixel-mapping (DPM)방법을 제안한다. 제안 방법은 커브형 집적영상 시스템에서 DPM 방법에 의해 먼 거리에 위치한 3차원 물체로부터 픽업된 요소영상배열 (elemental image array, EIA)은 가시적으로 가까운 거리에서 픽업한 것과 같은 새로운 요소영상배열을 생성한다. 이러한 특성은 재생한 3차원 물체 영상의 해상도를 향상 시킬 수 있고, 이로 인하여 먼 거리에 위치한 3차원 물체에 대한 인식 성능을 향상 시킬 수 있다. 컴퓨터적 실험결과와 기존 방법과의 비교를 통하여 제안방법으로 재생한 물체의 PSNR과 NCC의 값이 평균 1.75dB와 4.56% 향상됨을 확인할 수 있었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.301-305
• /
• 2007

The performance of the railway bogie is classified into the stability and the steering performance. Testing for the bogie stability is conducted on the roller rig. But testing for the bogie steering performance on test facility is very difficult, so the testing for the vehicle curving performance is conducted on the real curve track. And it is desirable to test on the full scale test rig, but it caused many problems relating to test costs, test time. To overcome these problems, the small scale test rig is actively used in the field of bogie stability. Thus, in this paper, we have studied the scale track to test the bogie steering performance. For this, we designed the 1/5 scale test track equivalent to radius 200 curve and confirmed the validity of the testing for the bogie steering performance on the scale curve track through the testing using 1/5 scale bogie.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.125-134
• /
• 2000

This paper presents the results of vehicle dynamics simulation for development of single axle bogie for freight vehicle. Those results consists of hunting stability, ride comfort and curving performance such as derailment ratio, unloading ratio. Dynamic behaviors of vehicle having single axle bogie is carried out using the multi-body dynamics simulation program(VAMPIRE). The results of analysis meet the criteria proposed by Korean National Railroad(KNR) and Korea Railroad Research Institute(KRRI).

• 대한기계학회논문집A
• /
• 제36권11호
• /
• pp.1479-1485
• /
• 2012

철도차량 곡선구간 주행 시 곡선주행성능을 향상시키기 위한 능동형 철도차량 개발 분야에서 곡선구간을 실시간으로 인식하기 위한 기술 확보는 매우 중요하다. 그러나 고가의 전용 검측차량을 이용하거나 여러 가지 센서를 복합적으로 이용하는 기존의 곡률반경 추정방법은 실차에 적용하기에는 실용성이 미흡하다. 따라서 본 논문에서는 실차에 적용이 용이하고 경제적인 곡률반경 추정방법을 제안하였다. 새로운 방법은 철도차량 곡선구간 주행 시 발행하는 차체와 대차간의 상대변위를 측정하여 곡률반경을 실시간으로 추정할 수 있는 방법이다. 본 제안 방법의 타당성을 검토하기 위하여 모사해석 및 실차시험을 수행하였으며 그 결과, 제안한 곡률반경 추정방법의 타당성을 확인하였다.