• Advances in Energy Research
• /
• 제8권1호
• /
• pp.21-39
• /
• 2022

In this study, the first law of thermodynamics was used to establish a one-dimensional (1-D) thermal model for parabolic trough receiver (PTR) taking into account the pressure drop and kinetic energy loss effects of the heat transfer fluid (HTF) flowing inside the absorber tube. The validation of the thermal model with data from the SEGS-LS2 solar collector-test showed a good agreement, which is consistent with the previously established models for the conventional straight and smooth (CSS) receiver where the effects of pressure drop and kinetic energy loss were neglected. Based on the developed model and code, a comparative study of the newly designed parabolic trough S-curved receiver versus the CSS receiver was conducted and solar unit's performances were analyzed. Without any supplementary devices, the S-curved receiver enhances the performance of the parabolic trough module, with a maximum of 0.16% compared to CSS receiver with the same sizes and mass flow rates. Thermal losses were reduced by 7% due to the decrease in the temperature of the outer surface of the receiver tube. In addition, it has been shown that from a mass flow rate of 9.5 kg/s the heat losses of the S-curved receiver remain unchanged despite the improvement in the heat transfer rate.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2004년도 추계학술발표회 발표논문집
• /
• pp.239-240
• /
• 2004

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2001년도 춘계학술발표대회 개요집
• /
• pp.71-74
• /
• 2001

• 한국산학기술학회논문지
• /
• 제16권7호
• /
• pp.4381-4387
• /
• 2015

선체의 외판은 복잡한 곡면 형상이며 대부분의 조선소에서는 이의 제작을 위해 가스 토치를 이용한 선상 가열 방법을 사용하고 있다. 가스 토치를 이용한 전통적인 선상 가열 방법은 입열량의 제어가 어려울 뿐만 아니라 고압의 가스 분출에 따른 소음과 대기 오염 등 열악한 작업 환경의 문제점을 안고 있다. 최근에는 입열량의 제어가 비교적 용이하고 친환경적인 고주파 유도 가열에 주목하여 이를 가열 열원으로 하는 강판의 성형 자동화 연구들이 진행되고 있다. 본 연구에서는 강판의 곡면 성형을 위한 유도 가열 시뮬레이션 방법을 개발하였으며 유도 가열 실험 결과와 비교하여 그 유효성을 검증하였다. 개발된 유도 가열 시뮬레이션 방법은 효율적인 유도 가열 코일 설계와 최적 성형 조건 산출 등 유도 가열을 이용한 선체 외판의 곡가공 자동화 시스템 개발에 유용한 해석적 툴로 활용될 수 있을 것으로 기대된다.

• Journal of Biosystems Engineering
• /
• 제5권2호
• /
• pp.26-39
• /
• 1980

A study was investigated to find out the mechanical optimum conditions of power tiller-plow system on both paddy field and upland. Mathematical model was developed for the theoretical analysis of this system and the experimentation on the field was carried out with two different sizes of 5PS and 8PS power tiller equipped with rubber tire. 1) The relationship between the plowing depth and draft resistance of the power tiller-plow system was a quadratic function. 2) The minimum point of the specific draft resistance of the 5 PS plow was found at the smaller plowing depth than that of 8 PS plow, therefore we can find that the curved surface of 5PS plow bottom should be improved for the effective plowing operation. 3) As the improvement of the mechanical balance by the desirable change of the curved surface of plow bottom, the relative position of hitch point and dimension of plow beam would be realized, the 5 PS power tiller could be used to plow deeply (about 16-17cm). 4) The virtual acting point of the total draft resistance on the plow bottom approached to the land side as the plowing depth increased. 5) The resultant of vertical reaction force $R_2$ on the landside was increased with the plowing depth, while the vertical reaction force $R_1$ on the wheel was decreased as the slope angle of the body of power tiller increased. 6) For the effective plowing operations ; a) The slope angle of the body should be as small as possible. b) The diameter of the wheel should be as small possible. c) The horizontal and vertical distances $l_2, h_1$ between the wheel axis and plow bottom should be as large as possible. 7) To use the 5PS power tiller as the major unit of agricultural machinery, the curved surface of the 5 PS plower bottom and the mechanism of attachment between the power tiller and the plow should be changed as the indications of this study, and in addition to these, the new operation method of the field work should be developed.

• 한국측량학회지
• /
• 제34권3호
• /
• pp.243-251
• /
• 2016

일반적으로 라이다 데이터 처리 과정은 노이즈 제거, 지표면/비지표면 분리를 위한 필터링, 데이터 분류, 객체분할, 형태인식, 객체 모델링, 성과물에 대한 정확도 검증 등이다. 본 논문은 점군집 라이다 데이터를 이용한 3차원 곡면객체의 모델링과 정확도 검증에 중점을 두고 있다. 기존의 구형 및 원통형 객체 모델링 방법은 함수의 선형화, 미지계수의 초기 근사값 및 반복 계산이 요구되지만, 제안한 방법은 모델링 함수의 미지계수를 직접 결정하는 방법이다. 이를 위하여 객체를 형성하는 단위 객체면 형태를 분석하여 적합한 함수를 결정하고, 함수를 구성하는 미지변수를 추정한 후 정확도를 분석하여 타당성을 검증하였다. 제안한 방법을 반구형 및 반원통의 시뮬레이션 및 실제 건물 데이터에 적용하여 모델링 함수의 계수와 정확도를 산정하였으며, 다양한 형태의 객체 모델링의 자동화에 기여할 것으로 판단된다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2006년도 특별논문집
• /
• pp.112-121
• /
• 2006

The vertical displacement of a ship on the basis of the sea level is an important parameter for its stability and control. To indicate the displacement on operating conditions, "draft marks" are carved on the hull of the ship in various ways. One of the methods is welding. The position, shape and size of the marks are specified on the shipbuilding rules by classification societies to be checked by shipbuilders. In most cases, high-skilled workers do the welding along the drawing for the marks and welding bead becomes the marks. But the inaccuracies due to human errors and high labor cost increase the needs for automating the work process of the draft marks. In the preceding work, an indoor robot was developed for automatic marking system on flat surfaces and the work proved that the robot welding was more effective and accurate than manual welding. However, many parts of the hull structure constructed at the outdoor are cowed shapes, which is beyond the capability of the robot developed for the indoor works on the flat surface. The marking on the curved steel surface requiring the 25m elevations is one of the main challenges to the conventional robots. In the present paper, the robot capable of climbing vertical curved steel surfaces and performing the welding at the marked position by effectively solving the problems mentioned earlier is presented.

• 한국운동역학회지
• /
• 제18권1호
• /
• pp.245-253
• /
• 2008

본 연구의 목적은 유선형 신발바닥면을 가진 신발의 착용이 자세의 변화 및 조절전략에 미치는 영향을 살펴보는 것이다. 먼저 30명의 여대생을 대상으로 신발의 족저면과 접지면의 상대각도가 조절된 상태에서 'New York State Posture Test'로 평가하여 최적의 각도의 신발(s)을 제작한 후 여대생 10명씩 3개 집단에 대해 각각 제작된 신발(s)과 유선형 신발(m), 일반신발(n)의 8주착용 전 후의 전경골근, 비복근의 근활성도를 평가하였다. 1. 'New York State Posture Test'에서의 자세평가점수는 신발의 각도변화에 따라 $-2^{\circ}$, $-7^{\circ}$에서 쌍봉형을 이루었으며 통계적으로 유의하였다. 또한 $-7^{\circ}$에서 가장 좋은 평가점수가 나왔으므로 이 각도로 신발을 제작하였다. 2. 유선형의 아웃솔을 가진 s, m 신발의 활성패턴을 보면 맨발에서 s신발 착용자의 경우 비복근, m신발 착용자는 전경골근의 활성도가 증가하였으며, 신발을 착용한 상태에서는 s신발에서만 비복근의 활성도가 높게 나타났다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.2157-2161
• /
• 2003

In this paper, the response surface method using three-dimensional Navier-Stokes analysis to optimize the shape of a forward-curved blades centrifugal fan, is described. For numerical analysis, Reynolds-averaged Navier-Stokes equations with standard k-e turbulence model are transformed into non-orthogonal curvilinear coordinate system, and are discretized with finite volume approximations. Due to the large number of blades in forward-curved blades centrifugal fan, the flow inside of the fan is regarded as steady flow by introducing the impeller force models for economic calculations. Linear Upwind Differencing Scheme(LUDS) is used to approximate the convection terms in the governing equations. SIMPLEC algorithm is used as a velocity-pressure correction procedure. Design variables, location of cur off, radius of cut off, expansion angle of scroll and width of impeller were selected to optimize the shapes of scroll and blades. Data points for response evaluations were selected by D-optimal design, and linear programming method was used for the optimization on the response surface. As a main result of the optimization, the efficiency was successfully improved. It was found that the optimization process provides reliable design of this kind of fans with reasonable computing time

• International Journal of CAD/CAM
• /
• 제6권1호
• /
• pp.199-211
• /
• 2006

Practical automated flat pattern generation with inbuilt production features for doubly curved sheet metal components (SMCs) is addressed here utilizing a new and unique Point Transformation Algorithm (PTA). This is the third in the series of papers on practical Flat Pattern Development (FPD) [8] and Production Loft Generation Systems (PLGS) [9] complementing the pioneering work [6,7]. In the first two publications, automated loft generation programs have addressed sheet metal components having a Principal Flat Surface (PFS) only. The flat pattern development of 3-D components that do not have the flat surface(termed as Non-PFS components) having complex features of double curvature in addition to cutouts and nibbled holes typical of aircraft components were so far not addressed due to lack of relevant published algorithms. This paper traces the evolution of developments and provides the record of fully illustrated, automated loft generation scheme for aircraft SMCs including the Non-PFS components which underwent validation through production tests by sponsors. Details of some of the unique features of the system like simplified surface model generation, termed as topological model and powerful algorithms deployed with potential for CAD/CAM applications are included.